Division 9

The inspection shall be deemed to have failed when

1. a))

   the load value displayed by the OBW corresponding to the load between 90 % to 100 % of the technically permissible maximum laden mass referred to in point 5(c) does not conform to the values measured by the certified weighing device, with the level of accuracy set out in point 8 of Annex I, and

2. b))

   the load values displayed by the OBW corresponding to the loads between 45 % and 55 %, and between 65 % and 75 % of the technically permissible maximum laden mass as referred to in points 5(a) and 5(b), do not conform to the values measured by the certified weighing device with a level or accuracy of ± 15 %.