Annex

Annexes II, IV, V and VI to Regulation (EU) No 168/2013 are amended as follows:

1. (1)

   in Annex II, section C1, in the row relating to No 11, the sign ‘X’ is deleted for subcategories L6e-A and L6e-B;

2. (2)

   in Annex IV, the table is amended as follows:

   1. (a)

      points 1.1.2.1, 1.1.2.2 and 1.1.2.3 are replaced by the following:

      ‘

      1.1.2.1	Euro 4: Annex VI A1	L1e, L2e, L6e	1.1.2017	1.1.2018	31.12.2020; for L2e-U and L6e-B: 31.12.2024
      1.1.2.2.	Euro 4: Annex VI A1	L3e, L4e, L5e, L7e	1.1.2016	1.1.2017	31.12.2020; for L3e-AxE and L3e-AxT 31.12.2024
      1.1.2.3.	Euro 5: Annex VI A2	L1e-L7e	1.1.2020; for L2e-U, L3e-AxE, L3e-AxT and L6e-B: 1.1.2024	1.1.2021; for L2e-U, L3e-AxE, L3e-AxT and L6e-B: 1.1.2025

      ’;

   2. (b)

      points 1.8.1, 1.8.2 and 1.8.3 are replaced by the following:

      ‘

      1.8.1.	OBD stage I functional requirements	L3e, L4e, L5e-A, L7e-A	1.1.2016	1.1.2017	31.12.2020
      	OBD stage I environmental test procedure (test type VIII)
      	OBD stage I environmental test thresholds, Annex VI (B1)
      1.8.2	OBD stage I functional requirements including any operating mode which significantly reduces engine torque	L3e, L4e, L5e, L7e	1.1.2020	1.1.2021	31.12.2024
      	OBD stage I environmental test procedure (test type VIII)
      	OBD stage I environmental test thresholds, Annex VI (B1)
      1.8.3	OBD stage I functional requirements including any operating mode which significantly reduces engine torque	L3e, L4e, L5e, L7e	1.1.2024	1.1.2025
      	OBD stage I environmental test procedure (test type VIII)
      	OBD stage I environmental test thresholds, Annex VI (B2)

      ’

   3. (c)

      the following points are inserted:

      ‘

      1.8.4.	OBD stage II functional requirements with the exception of catalyst monitoring	L3e (except L3e-AxE and L3e-AxT), L4e, L5e-A, L7e-A	1.1.2020	1.1.2021	31.12.2024
      	OBD stage II environmental test procedures (test type VIII)
      	OBD stage II environmental test thresholds, Annex VI (B1)
      1.8.5.	OBD stage II functional requirements,	L3e (except L3e-AxE and L3e-AxT), L4e, L5e-A, L7e-A	1.1.2024	1.1.2025
      	OBD stage II environmental test procedures (test type VIII),
      	OBD stage II environmental test thresholds, Annex VI (B2)

      ’

   4. (d)

      points 1.9.1 and 1.9.2 are replaced by the following:

      ‘

      1.9.1.	Sound level test procedure and limit values Annex VI (D)	L1e, L2e, L6e	1.1.2017	1.1.2018
      1.9.2.	Sound level test procedure and limit values (3), Annex VI (D)	L3e, L4e, L5e, L7e	1.1.2016	1.1.2017

      ’

   5. (e)

      point 1.9.4 is replaced by the following:

      ‘

      1.9.4.

      UNECE regulations Nos 9, 41, 63, 92 and associated new limit values proposed by the Commission

      L1e-L7e

      ’

3. (3)

   in Annex V, section B, the content of the cell in the first column, second row, is replaced by the following:

   ‘Type I test (¹⁹) Particulate mass (Euro 5 only)’;

4. (4)

   Annex VI is amended as follows:

   1. (a)

      in section B1, the first row, referring to Vehicle category ‘L6e-A’, is deleted;

   2. (b)

      in section B2, first row:

      1. (i)

         the words ‘L3e-L7e (⁶)’ are replaced by the following:

         ‘L3e, L4e, L5e, L7e’;

      2. (ii)

         the words ‘All L category vehicles except category L1e and L2e’ are replaced by the following:

         ‘All L category vehicles except category L1e, L2e and L6e’.