{
  "url": "https://openlegislation.uk/eu-regulation-2019-1383/annex-IV",
  "json_url": "https://openlegislation.uk/eu-regulation-2019-1383/annex-IV.json",
  "legislation": "eur/2019/1383",
  "legislation_title": "Commission Implementing Regulation (EU) 2019/1383 of 8 July 2019 amending and correcting Regulation (EU) No 1321/2014 as regards safety management systems in continuing airworthiness management organisations and alleviations for general aviation aircraft concerning maintenance and continuing airworthiness management (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2019-1383",
  "path": "annex/IV",
  "kind": "annex",
  "number": "IV",
  "heading": null,
  "text": "Annex IV to Regulation (EU) No 1321/2014 is amended as follows:\n(1) in point 147.B.25, point (b) is replaced by the following:\n‘(b)\nAll exemptions granted in accordance with Article 71(1) of Regulation (EU) 2018/1139 shall be recorded and retained by the competent authority.’\n(2) Appendix II is replaced by the following:\n‘Appendix II\nMaintenance Training Organisation Approval — EASA Form 11\n’\n(3) Appendix III is replaced by:\n‘1.\nBasic Training and Examination\nThe basic training certificate template shall be used for recognition of completion of either the basic training or the basic examination, or both the basic training and basic training examinations.\nThe training certificate shall clearly identify each individual module examination by date passed together with the corresponding version of Appendix I to Annex III (Part-66).\n2.\nType Training and Examination\nThe type training certificate template shall be used for recognition of completion of either the theoretical elements or the practical elements, or both the theoretical and practical elements of the type rating training course.\nThe certificate shall indicate the airframe/engine combination for which the training was imparted.\nThe appropriate references shall be deleted as applicable and the course type box shall detail whether only the theoretical elements or the practical elements were covered or whether theoretical and practical elements were covered.\nThe training certificate shall clearly identify if the course is a complete course or a partial course (such as an airframe or powerplant or avionic/electrical course) or a difference course based upon the applicant previous experience, for instance A340 (CFM) course for A320 technicians. If the course is not a complete one, the certificate shall identify whether the interface areas have been covered or not.\n’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2019/1383/annex/IV",
    "retrieved_at": "2026-11-01T14:43:10.620421+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}