# Commission Regulation (EU) 2019/1784 of 1 October 2019 laying down ecodesign requirements for welding equipment pursuant to Directive 2009/125/EC of the European Parliament and of the Council (Text with EEA relevance), Annex V: Benchmarks

Extent: E+W+S+N.I.

The following benchmarks are identified for the purpose of Part 3, point 2 of Annex I to Directive 2009/125/EC.
The best available technology on the market, at the time of entry into force of this Regulation, for the environmental aspects that were considered significant and are quantifiable is indicated below.
Table 3
Benchmarks for power source efficiency and idle state power consumption
Product type
Power source efficiency
Maximum idle state power consumption
Welding equipment powered by three-phase power sources with direct current (DC) output
92 %
10 W
Welding equipment powered by single-phase power sources with direct current (DC) output
90 %
10 W
Welding equipment powered by single-phase and three-phase power sources with alternating current (AC) output
83 %
10 W

---
Source: https://www.legislation.gov.uk/eur/2019/1784/annex/V (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-1784/annex-V
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.