# Commission Implementing Regulation (EU) 2019/1844 of 22 October 2019 granting a Union authorisation for the biocidal product family ‘BPF_Iodine_VET’ (Text with EEA relevance), Division 5.1: Instructions for use

Extent: E+W+S+N.I.

Always read the label or leaflet before use and follow all the instructions provided.
The product must be brought to a temperature above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
Immediately after each cow has been milked, spray the entire surface of each teat with the solution. Leave the product until next milking. Do not clean the teats directly after disinfection.
Keep the cows standing until the product has dried (at least 5 minutes).
Product can be applied manually or by means of automatic teat sprayer.
Before the next milking the teats have to be cleaned, preferably with one new wet cloth per cow.
Application frequency must not exceed two applications per cow and day considering manual spraying and must not exceed three applications per cow and day considering automatic teat sprayer (post-milking).

---
Source: https://www.legislation.gov.uk/eur/2019/1844/annex/part/II/division/2/division/5/division/5.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-1844/annex/part-II/division-2/division-5/division-5.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.