Annex II
United Kingdom
Annex V to Regulation (EU) No 1230/2012 is amended as follows:
- (1)
Part A is amended as follows:
- (a)
the title is replaced by the following:
‘PART A
EC type-approval of motor vehicles and their trailers with regard to the masses and dimensions of a vehicle
INFORMATION DOCUMENT
MODEL’
- (b)
the following point 2.4.2.1.3. is inserted:
2.4.2.1.3.
Elongated cab complying to Article 9a of Directive 96/53/EC: yes/no(1)
- (c)
the following point 2.6.4. is inserted:
2.6.4.
Additional mass for alternative propulsion: … kg
- (d)
the following point 3.9. is inserted:
3.9.
List of equipment to for alternative propulsion (and indication of the mass of the parts): …
- (e)
the following points 9.25. to 9.27.3. are inserted:
9.25.
Elongated Cabs complying to Article 9a of Directive 96/53/EC
9.25.1.
Detailed technical description (including photographs and drawings, as well as description of the materials) of the vehicle parts relevant to Part C, point 1.4 of Annex I to Regulation (EU) No 1230/2012: …
9.26.
Aerodynamic device or equipment on the front of the vehicle
9.26.1.
Vehicle equipped with aerodynamic device or equipment on the front: yes/no(1)
9.26.2.
Type-approval number of the aerodynamic device or equipment, if available: … or, if not available:
9.26.3.
Detailed description (including photographs or drawings) of the aerodynamic device or equipment
9.26.3.1.
Construction and materials: …
9.26.3.2.
Locking and adjustment system: …
9.26.3.3.
Attachment and mounting to the vehicle: …
9.27.
Aerodynamic device or equipment on the rear of the vehicle
9.27.1.
Vehicle equipped with aerodynamic device or equipment on the rear: yes/no(1)
9.27.2.
Type-approval number of the aerodynamic device or equipment, if available ... or, if not available:
9.27.3.
Detailed description (including photographs or drawings) of the aerodynamic device or equipment
9.27.3.1.
Construction and materials: …
9.27.3.2.
Locking and adjustment system: …
9.27.3.3.
Attachment and mounting to the vehicle: …
- (a)
- (2)
Part B is amended as follows:
- (a)
the title is replaced by the following:
‘PART B
EC type-approval certificate of motor vehicles and their trailers with regard to the masses and dimensions of vehicles
MODEL
Format: A4 (210 × 297 mm)
EC TYPE-APPROVAL CERTIFICATE ’;
- (b)
the words “with regard to Regulation (EU) No. …/…” are replaced by the words ‘with regard to Regulation (EU) No 1230/2012, as last amended by Regulation (EU) 2019/1892’;
- (c)
the Addendum is replaced by the following:
‘Addendum
to EC type-approval certificate No ...
1.
Derogations
1.1.
The vehicle has been type-approved in accordance with Article 6(1) of this Regulation (i.e. the outermost dimensions of the vehicle exceeds the maximum dimensions mentioned in Part A, B, C or D of Annex I): yes/nof1
1.2.
The vehicle has been type-approved for the purposes of Article 8b of Directive 96/53/EC (i.e. aerodynamic devices or equipment at the rear of the vehicle): yes/no
1.3.
The vehicle has been type-approved for the purposes of with Article 9a of Directive 96/53/EC (i.e. an elongated cab or a cab fitted with aerodynamic devices or equipment): yes/no
1.4.
The vehicle has been type-approved for the purposes of Article 10b of Directive 96/53/EC:
1.4.1.
Additional weight of alternatively fuelled vehicles: yes/no
1.4.2.
Additional weight of zero-emission vehicles: yes/no
2.
The vehicle is fitted with air-suspension: yes/no
3.
The vehicle is fitted with a suspension recognised to be equivalent to air-suspension: yes/no
4.
The vehicle fulfils the requirements for an off-road vehicle: yes/no
5.
Remarks: …’;
- (a)
- (3)
the following Parts C, D and E are added:
‘PART C
EC type-approval of an aerodynamic device or equipment as a separate technical unit
Information document
MODEL
Information document No … relating to the EC type-approval of an aerodynamic device or equipment as a separate technical unit.
The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the separate technical units referred to in this information document have electronic controls, information concerning their performance shall also be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer): …
0.2.
Type: …
0.3.
Means of identification of type, if marked on the separate technical unit (b): …
0.3.1.
Location of that marking: …
0.5.
Name and address of manufacturer: …
0.7.
Location and method of affixing the EC type- approval mark: …
0.8.
Name(s) and address(es) of assembly plant(s): …
0.9.
Name and address of the manufacturer’s representative (if any): …
9.26.
Aerodynamic device or equipment on the front of the vehicle
9.26.1.
Vehicle equipped with aerodynamic device or equipment on the front: yes/no (1)
9.26.2.
Type-approval number of the aerodynamic device or equipment, if available: … or, if not available:
9.26.3.
Detailed description (including photographs or drawings) of the aerodynamic device or equipment
9.26.3.1.
Construction and materials: …
9.26.3.2.
Locking and adjustment system: …
9.26.3.3.
Attachment and mounting to the vehicle: …
9.27.
Aerodynamic device or equipment on the rear of the vehicle
9.27.1.
Vehicle equipped with aerodynamic device or equipment on the rear: yes/no (1)
9.27.2.
Type-approval number of the aerodynamic device or equipment, if available ... or, if not available:
9.27.3.
Detailed description (including photographs or drawings) of the aerodynamic device or equipment
9.27.3.1.
Construction and materials: …
9.27.3.2.
Locking and adjustment system: …
9.27.3.3.
Attachment and mounting to the vehicle: …
Explanatory notes
(b)
If the means of identification of type contains characters not relevant to describe the separate technical unit type covered by this information document, such characters shall be represented in the documentation by the symbol “?” (e.g. ABC??123??).
(1)
Delete where not applicable.
PART D
EC type-approval certificate for an aerodynamic device or equipment as a separate technical unit
MODEL
Format: A4 (210 × 297 mm)
EC TYPE-APPROVAL CERTIFICATE
Stamp of type-approval authority
Communication concerning:
- EC type-approval (1)
- extension of EC type-approval (1)
- refusal of EC type-approval (1)
- withdrawal of EC type-approval (1)
of a type of aerodynamic device or equipment as a separate technical unit with regard to Regulation (EU) No 1230/2012, as last amended by Regulation (EU) 2019/1892 f2
EC type-approval number: …
Reason for extension: …
SECTION I
0.1.
Make (trade name of manufacturer): …
0.2.
Type: …
0.3.
Means of identification of type, if marked on the separate technical unitf3: …
0.3.1.
Location of that marking: …
0.5.
Name and address of manufacturer: …
0.7.
Location and method of affixing of the EC type-approval mark: …
0.8.
Name(s) and address(es) of assembly plant(s): …
0.9.
Name and address of the manufacturer’s representative (if any): …
SECTION II
1.
Additional information: see Addendum.
2.
Technical service responsible for carrying out the tests: …
3.
Date of test report: …
4.
Number of test report: …
5.
Remarks (if any): see Addendum.
6.
Place: …
7.
Date: …
8.
Signature: …
Attachments: Information package
Test report
Addendum
to EC type-approval certificate No ...
1.
Brief description of the type of separate technical unit: …
2.
Detailed description of the aerodynamic device or equipment:
2.1.
Number of separate elements: …
2.2.
Description of construction and materials: …
2.3.
Description of locking and adjustment system: …
2.4.
Description of attachment and mounting to the vehicle: …
2.5.
Separate technical unit: semi-universal/vehicle specific (1)
3.
List of specific vehicle types for which the separate technical unit has been approved (if applicable): …
4.
Detailed description of the specific mounting area specifications on vehicles in case of semi-universal aerodynamic devices or equipment (if applicable): …
5.
Remarks: …
6.
Type-approval mark and its location: …
PART E
EC separate technical unit type-approval mark
1.
The EC separate technical unit type-approval mark shall consist of:
1.1.
A rectangle surrounding the lower-case letter “e” followed by the distinguishing number of the Member State which has granted the EC separate technical unit type-approval:
1 for Germany 19 for Romania 2 for France 20 for Poland 3 for Italy 21 for Portugal 4 for The Netherlands 23 for Greece 5 for Sweden 24 for Ireland 6 for Belgium 25 for Croatia 7 for Hungary 26 for Slovenia 8 for the Czech Republic 27 for Slovakia 9 for Spain 29 for Estonia 11 for the United Kingdom 32 for Latvia 12 for Austria 34 for Bulgaria 13 for Luxembourg 36 for Lithuania 17 for Finland 49 for Cyprus 18 for Denmark 50 for Malta 1.2.
In the vicinity of the rectangle the “base approval number” contained in Section 4 of the type-approval number preceded by the two figures indicating the sequence number assigned to this Regulation or latest major technical amendment to this Regulation. The sequence number is “00” at present.
1.3.
In case of an aerodynamic device or equipment of cabs, the sequence number shall be preceded by the symbol “96/53/EC ARTICLE 9A COMPLIANT”.
1.4.
In case of an aerodynamic device or equipment to be located on the rear of a vehicle, the sequence number shall be preceded by the symbol “96/53/EC ARTICLE 8B COMPLIANT”.
2.
The EC separate technical unit type-approval mark shall be affixed to a main part of the aerodynamic device or equipment in such a way as to be indelible as well as clearly and easily legible even if the device is fitted to a vehicle.
3.
An example of an EC separate technical unit type-approval mark is shown in Figure 1.
Figure 1
Example of EC separate technical unit type-approval mark
Explanatory note
The EC separate technical unit type-approval of an aerodynamic device or equipment to be installed at the rear of a vehicle (for the purpose of compliance with Article 8b of Directive 96/53/EC) was issued by Romania under number 0046. The first two digits “00” indicate that the separate technical unit was approved in accordance withthis Regulation.’
Annotations
Footnotes
- f1
-
Delete where not applicable.
- f2
-
Delete where not applicable.
- f3
-
If the means of identification of type contains characters not relevant to describe the separate technical unit type covered by this information document, such characters shall be represented in the documentation by the symbol “?” (e.g. ABC??123??).