{
  "url": "https://openlegislation.uk/eu-regulation-2019-1892/article-1",
  "json_url": "https://openlegislation.uk/eu-regulation-2019-1892/article-1.json",
  "legislation": "eur/2019/1892",
  "legislation_title": "Commission Regulation (EU) 2019/1892 of 31 October 2019 amending Regulation (EU) No 1230/2012 as regards type-approval requirements for certain motor vehicles fitted with elongated cabs and for aerodynamic devices and equipment for motor vehicles and their trailers (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2019-1892",
  "path": "article/1",
  "kind": "article",
  "number": "1",
  "heading": null,
  "text": "Regulation (EU) No 1230/2012 is amended as follows:\n(1) in Article 1, paragraph 1 is replaced by the following:\n‘1. This Regulation lays down the requirements for the EC type-approval of motor vehicles and their trailers with regard to their masses and dimensions as well as of certain separate technical units intended for those vehicles.’;\n(2) Article 2 is amended as follows:\n(a) points (25) and (26) are replaced by the following:\n(25) ‘“wheelbase” means the following:\n(a) for motor vehicles and drawbar trailers, the horizontal distance between the centre of the first and the last axle;\n(b) for centre-axle trailers, semi-trailers and rigid drawbar trailers, the distance between the vertical axis of the coupling and the centre of the last axle;\n(26) “axle spacing” means the distance between two consecutive axles; for centre axle trailers, semi-trailers and rigid drawbar trailers, the first axle spacing is the horizontal distance between the vertical axis of the front coupling and the centre of the first axle;’;\n(b) point (33) is replaced by the following:\n(33) ‘“rear swing-out” means the distance between the initial point and the actual extreme point reached by the rear end of a vehicle when manoeuvring in the conditions specified in Section 8 of Part B of Annex I or in Section 7 of Part C of that Annex;’;\n(c) the following point (41) is added:\n(41) ‘“aerodynamic devices and equipment” mean devices or equipment that are designed to reduce the aerodynamic drag of road vehicles, with the exception of elongated cabs.’;\n(3) the following Articles 4a and 4b are inserted:\n‘EC separate technical unit type-approval of aerodynamic devices and equipment\nArticle 4a 1. The manufacturer or his representative shall submit to the type-approval authority the application for EC type-approval of an aerodynamic device or equipment as a separate technical unit.\nThe application shall be drawn up in accordance with the model of the information document set out in Part C of Annex V.\n2. If the relevant requirements set out in this Regulation are met, the approval authority shall grant an EC separate technical unit type-approval and issue a type-approval number in accordance with the numbering system set out in Annex VII to Directive 2007/46/EC\nA Member State shall not assign the same number to another type of separate technical unit.\n3. For the purposes of paragraph 2, the type-approval authority shall deliver an EC type-approval certificate established in accordance with the model set out in Part D of Annex V.\nEC separate technical unit type-approval mark\nArticle 4b Every separate technical unit conforming to a type in respect of which EC separate technical unit type-approval has been granted pursuant to this Regulation shall bear an EC separate technical unit type-approval mark as set out in Part E of Annex V.’;\n(4) Annex I is amended in accordance with Annex I to this Regulation;\n(5) Annex V is amended in accordance with Annex II to this Regulation.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2019/1892/article/1",
    "retrieved_at": "2026-11-01T14:43:01.974886+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}