{
  "url": "https://openlegislation.uk/eu-regulation-2019-2015/annex-VI/division-1",
  "json_url": "https://openlegislation.uk/eu-regulation-2019-2015/annex-VI/division-1.json",
  "legislation": "eur/2019/2015",
  "legislation_title": "Commission Delegated Regulation (EU) 2019/2015 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of light sources and repealing Commission Delegated Regulation (EU) No 874/2012 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2019-2015",
  "path": "annex/VI/division/1",
  "kind": "division",
  "number": "1",
  "heading": "The technical documentation referred to in point 1(d) of Article 3 shall include:",
  "text": "(a) the name and address of the supplier;\n(b) supplier’s model identifier;\n(c) the model identifier of all equivalent models already placed on the market;\n(d) identification and signature of the person empowered to bind the supplier;\n(e) the declared and measured values for the following technical parameters:\n(1) useful luminous flux (Φuse) in lm;\n(2) colour rendering index (CRI);\n(3) on-mode power (Pon) in W;\n(4) beam angle in degrees for directional light sources (DLS);\n(5) correlated colour temperature (CCT) in K for FL and HID light sources;\n(6) 'standby power (Psb) in W, including when it is zero;\n(7) networked standby power (Pnet) in W for connected light sources (CLS);\n(8) displacement factor (cos φ1) for LED and OLED mains light sources;\n(9) colour consistency in MacAdam ellipse steps for LED and OLED light sources;\n(10) luminance-HLLS in cd/mm2 (only for HLLS)\n(11) flicker metric (PstLM) for LED and OLED light sources;\n(12) stroboscopic effect metric (SVM) for LED and OLED light sources;\n(13) excitation purity, only for CTLS, for the following colours and dominant wavelength within the given range:\nColour Dominant wave-length range\nBlue 440 nm — 490 nm\nGreen 520 nm — 570 nm\nRed 610 nm — 670 nm\n(f) the calculations performed with the parameters, including the determination of the energy efficiency class;\n(g) references to the harmonised standards applied or other standards used;\n(h) testing conditions if not described sufficiently in point (g);\n(i) the reference control settings, and instructions on how they can be implemented, where applicable;\n(j) instructions on how to remove lighting control parts and/or non-lighting parts, if any, or how to switch them off or minimise their power consumption during light source testing;\n(k) specific precautions that shall be taken when the model is assembled, installed, maintained or tested.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2019/2015/annex/VI/division/1",
    "retrieved_at": "2026-11-01T14:43:00.426575+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}