# Commission Delegated Regulation (EU) 2019/2015 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of light sources and repealing Commission Delegated Regulation (EU) No 874/2012 (Text with EEA relevance), Division 1: The technical documentation referred to in point 1(d) of Article 3 shall include:

Extent: E+W+S+N.I.

(a) the name and address of the supplier;
(b) supplier’s model identifier;
(c) the model identifier of all equivalent models already placed on the market;
(d) identification and signature of the person empowered to bind the supplier;
(e) the declared and measured values for the following technical parameters:
(1) useful luminous flux (Φuse) in lm;
(2) colour rendering index (CRI);
(3) on-mode power (Pon) in W;
(4) beam angle in degrees for directional light sources (DLS);
(5) correlated colour temperature (CCT) in K for FL and HID light sources;
(6) 'standby power (Psb) in W, including when it is zero;
(7) networked standby power (Pnet) in W for connected light sources (CLS);
(8) displacement factor (cos φ1) for LED and OLED mains light sources;
(9) colour consistency in MacAdam ellipse steps for LED and OLED light sources;
(10) luminance-HLLS in cd/mm2 (only for HLLS)
(11) flicker metric (PstLM) for LED and OLED light sources;
(12) stroboscopic effect metric (SVM) for LED and OLED light sources;
(13) excitation purity, only for CTLS, for the following colours and dominant wavelength within the given range:
Colour Dominant wave-length range
Blue 440 nm — 490 nm
Green 520 nm — 570 nm
Red 610 nm — 670 nm
(f) the calculations performed with the parameters, including the determination of the energy efficiency class;
(g) references to the harmonised standards applied or other standards used;
(h) testing conditions if not described sufficiently in point (g);
(i) the reference control settings, and instructions on how they can be implemented, where applicable;
(j) instructions on how to remove lighting control parts and/or non-lighting parts, if any, or how to switch them off or minimise their power consumption during light source testing;
(k) specific precautions that shall be taken when the model is assembled, installed, maintained or tested.

---
Source: https://www.legislation.gov.uk/eur/2019/2015/annex/VI/division/1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-2015/annex-VI/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.