# Commission Delegated Regulation (EU) 2019/2199 of 17 October 2019 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items, Division 2E: Technology

Extent: E+W+S+N.I.

2E001 "Technology" according to the General Technology Note for the "development" of equipment or "software" specified in 2A, 2B or 2D.
Note: 2E001 includes "technology" for the integration of probe systems into coordinate measurement machines specified in 2B006.a.
2E002 "Technology" according to the General Technology Note for the "production" of equipment specified in 2A or 2B.
2E003 Other "technology", as follows:
a.. Not used;
b.. "Technology" for metal-working manufacturing processes, as follows:
1.. "Technology" for the design of tools, dies or fixtures specially designed for any of the following processes:
a.. "Superplastic forming";
b.. "Diffusion bonding"; or
c.. ‘Direct-acting hydraulic pressing’;
2.. Technical data consisting of process methods or parameters as listed below used to control:
a.. "Superplastic forming" of aluminium alloys, titanium alloys or "superalloys":
1.. Surface preparation;
2.. Strain rate;
3.. Temperature;
4.. Pressure;
b.. "Diffusion bonding" of "superalloys" or titanium alloys:
1.. Surface preparation;
2.. Temperature;
3.. Pressure;
c.. 'Direct-acting hydraulic pressing'of aluminium alloys or titanium alloys:
1.. Pressure;
2.. Cycle time;
d.. ‘Hot isostatic densification’ of titanium alloys, aluminium alloys or "superalloys":
1.. Temperature;
2.. Pressure;
3.. Cycle time;
2E003 b. 2. Technical Notes:
1.
‘Direct-acting hydraulic pressing’ is a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece.
2.
‘Hot isostatic densification’ is a process of pressurising a casting at temperatures exceeding 375 K (102 °C) in a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal force in all directions to reduce or eliminate internal voids in the casting
c.. "Technology" for the "development" or "production" of hydraulic stretch-forming machines and dies therefor, for the manufacture of airframe structures;
d.. Not used;
e.. "Technology" for the "development" of integration "software" for incorporation of expert systems for advanced decision support of shop floor operations into "numerical control" units;
f.. "Technology" for the application of inorganic overlay coatings or inorganic surface modification coatings (specified in column 3 of the following table) to non-electronic substrates (specified in column 2 of the following table), by processes specified in column 1 of the following table and defined in the Technical Note.
Note: The table and Technical Note appear after entry 2E301.
N.B. This table should be read to specify the "technology" for a particular Coating Process only when the Resultant Coating in column 3 is in a paragraph directly across from the relevant Substrate under column 2. For example, Chemical Vapour Deposition (CVD) coating process technical data are included for the application of silicides to carbon-carbon, ceramic and metal "matrix""composites" substrates, but are not included for the application of silicides to ‘cemented tungsten carbide’ (16), ‘silicon carbide’ (18) substrates. In the second case, the resultant coating is not listed in the paragraph under column 3 directly across from the paragraph under column 2 listing ‘cemented tungsten carbide’ (16), ‘silicon carbide’ (18).
2E101 "Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 2B004, 2B009, 2B104, 2B109, 2B116, 2B119 to 2B122 or 2D101.
2E201 "Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 2A225, 2A226, 2B001, 2B006, 2B007.b., 2B007.c., 2B008, 2B009, 2B201, 2B204, 2B206, 2B207, 2B209, 2B225 to 2B233, 2D201 or 2D202.
2E301 "Technology" according to the General Technology Note for the "use" of goods specified in 2B350 to 2B352.
Table
Deposition techniques
The numbers in parenthesis refer to the Notes following this Table.
1. Coating Process (1)
2. Substrate
3. Resultant Coating
A.
Chemical Vapour Deposition (CVD)
"Superalloys"
Aluminides for internal passages
Ceramics (19) and Low expansion glasses (14)
Silicides
Carbides
Dielectric layers (15)
Diamond
Diamond-like carbon (17)
Carbon-carbon, Ceramic and Metal "matrix""composites"
Silicides
Carbides
Refractory metals
Mixtures thereof (4)
Dielectric layers (15)
Aluminides
Alloyed aluminides (2)
Boron nitride
Cemented tungsten carbide (16), Silicon carbide (18)
Carbides
Tungsten
Mixtures thereof (4)
Dielectric layers (15)
Molybdenum and Molybdenum alloys
Dielectric layers (15)
Beryllium and Beryllium alloys
Dielectric layers (15)
Diamond
Diamond-like carbon (17)
Sensor window materials (9)
Dielectric layers (15)
Diamond
Diamond-like carbon (17)
B.
Thermal-Evaporation Physical Vapour Deposition (TE-PVD)
B.1.
Physical Vapour Deposition (PVD): Electron-Beam (EB-PVD)
"Superalloys"
Alloyed silicides
Alloyed aluminides (2)
MCrAlX (5)
Modified zirconia (12)
Silicides
Aluminides
Mixtures thereof (4)
Ceramics (19) and Low expansion glasses (14)
Dielectric layers (15)
Corrosion resistant steel (7)
MCrAlX (5)
Modified zirconia (12)
Mixtures thereof (4)
Carbon-carbon, Ceramic and Metal "matrix""composites"
Silicides
Carbides
Refractory metals
Mixtures thereof (4)
Dielectric layers (15)
Boron nitride
Cemented tungsten carbide (16), Silicon carbide (18)
Carbides
Tungsten
Mixtures thereof (4)
Dielectric layers (15)
Molybdenum and Molybdenum alloys
Dielectric layers (15)
Beryllium and Beryllium alloys
Dielectric layers (15)
Borides
Beryllium
Sensor window materials (9)
Dielectric layers (15)
Titanium alloys (13)
Borides
Nitrides
B.2.
Ion assisted resistive heating Physical Vapour Deposition (PVD) (Ion Plating)
Ceramics (19) and Low-expansion glasses
Dielectric layers (15)
Diamond-like carbon (17)
Carbon-carbon, Ceramic and Metal "matrix""composites"
Dielectric layers (15)
Cemented tungsten carbide (16), Silicon carbide
Dielectric layers (15)
Molybdenum and Molybdenum alloys
Dielectric layers (15)
Beryllium and Beryllium alloys
Dielectric layers (15)
Sensor window materials (9)
Dielectric layers (15)
Diamond-like carbon (17)
B.3.
Physical Vapour Deposition (PVD): "Laser" Vaporization
Ceramics (19) and Low expansion glasses (14)
Silicides
Dielectric layers (15)
Diamond-like carbon (17)
Carbon-carbon, Ceramic and Metal "matrix""composites"
Dielectric layers (15)
Cemented tungsten carbide (16), Silicon carbide
Dielectric layers (15)
Molybdenum and Molybdenum alloys
Dielectric layers (15)
Beryllium and Beryllium alloys
Dielectric layers (15)
Sensor window materials (9)
Dielectric layers (15)
Diamond-like carbon (17)
B.4.
Physical Vapour Deposition (PVD): Cathodic Arc Discharge
"Superalloys"
Alloyed silicides
Alloyed aluminides (2)
MCrAlX (5)
Polymers (11) and Organic "matrix""composites"
Borides
Carbides
Nitrides
Diamond-like carbon (17)
C.
Pack cementation (see A above for out-of-pack cementation) (10)
Carbon-carbon, Ceramic and Metal "matrix""composites"
Silicides
Carbides
Mixtures thereof (4)
Titanium alloys (13)
Silicides
Aluminides
Alloyed aluminides (2)
Refractory metals and alloys (8)
Silicides
Oxides
D.
Plasma spraying
"Superalloys"
MCrAlX (5)
Modified zirconia (12)
Mixtures thereof (4)
Abradable Nickel-Graphite
Abradable materials containing Ni-Cr-Al
Abradable Al-Si-Polyester
Alloyed aluminides (2)
Aluminium alloys (6)
MCrAlX (5)
Modified zirconia (12)
Silicides
Mixtures thereof (4)
Refractory metals and alloys (8)
Aluminides
Silicides
Carbides
Corrosion resistant steel (7)
MCrAlX (5)
Modified zirconia (12)
Mixtures thereof (4)
Titanium alloys (13)
Carbides
Aluminides
Silicides
Alloyed aluminides (2)
Abradable Nickel-Graphite
Abradable materials containing Ni-Cr-Al
Abradable Al-Si-Polyester
E.
Slurry Deposition
Refractory metals and alloys (8)
Fused silicides
Fused aluminides except for resistance heating elements
Carbon-carbon, Ceramic and Metal "matrix""composites"
Silicides
Carbides
Mixtures thereof (4)
F.
Sputter Deposition
"Superalloys"
Alloyed silicides
Alloyed aluminides (2)
Noble metal modified aluminides (3)
MCrAlX (5)
Modified zirconia (12)
Platinum
Mixtures thereof (4)
Ceramics and Low- expansion glasses (14)
Silicides
Platinum
Mixtures thereof (4)
Dielectic layers (15)
Diamond-like carbon (17)
Titanium alloys (13)
Borides
Nitrides
Oxides
Silicides
Aluminides
Alloyed aluminides (2)
Carbides
Carbon-carbon, Ceramic and Metal "matrix""composites"
Silicides
Carbides
Refractory metals
Mixtures thereof (4)
Dielectric layers (15)
Boron nitride
Cemented tungsten carbide (16), Silicon carbide (18)
Carbides
Tungsten
Mixtures thereof (4)
Dielectric layers (15)
Boron nitride
Molybdenum and Molybdenum alloys
Dielectric layers (15)
Beryllium and Beryllium alloys
Borides
Dielectric layers (15)
Beryllium
Sensor window materials (9)
Dielectric layers (15)
Diamond-like carbon (17)
Refractory metals and alloys (8)
Aluminides
Silicides
Oxides
Carbides
G.
Ion Implantation
High temperature bearing steels
Additions of Chromium Tantalum or Niobium (Columbium)
Titanium alloys (13)
Borides
Nitrides
Beryllium and Beryllium alloys
Borides
Cemented tungsten carbide (16)
Carbides
Nitrides

---
Source: https://www.legislation.gov.uk/eur/2019/2199/annex/I/division/4/division/2E (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-2199/annex-I/division-4/division-2E
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.