{
  "url": "https://openlegislation.uk/eu-regulation-2019-318/annex-IX",
  "json_url": "https://openlegislation.uk/eu-regulation-2019-318/annex-IX.json",
  "legislation": "eur/2019/318",
  "legislation_title": "Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2019-318",
  "path": "annex/IX",
  "kind": "annex",
  "number": "IX",
  "heading": null,
  "text": "Annex X to Regulation (EU) 2017/2400 is amended as follows:\n(1) point 3.4.1 is replaced by the following:\n‘3.4.1.\nThe tyre shall be clearly identifiable in respect to the certificate covering it for the corresponding rolling resistance coefficient.’;\n(2) in point 3.4.2, the first sentence is replaced by the following:\n‘The tyre manufacturer shall use the markings affixed to the side wall of the tyre or affix an additional identifier to the tyre.’;\n(3) Appendix 1 is replaced by the following:\n‘Appendix 1\nMODEL OF A CERTIFICATE OF A COMPONENT, SEPARATE TECHNICAL UNIT OR SYSTEM\nMaximum format: A4 (210 × 297 mm)\nCERTIFICATE ON CO2 EMISSIONS AND FUEL CONSUMPTION RELATED PROPERTIES OF A TYRE FAMILY\n“delete as appropriate”\nCommunication concerning:\ngranting\nextension\nrefusal\nwithdrawal\nAdministration stamp\nof a certificate on CO2 emission and fuel consumption related properties of a tyre family in accordance with Commission Regulation (EU) 2017/2400, as amended by Commission Regulation (EU) 2019/318\nCertification number: …\nHash: …\nReason for extension: …\n1.\nManufacturer's name and address: …\n2.\nIf applicable, name and address of manufacturer's representative: …\n3.\nBrand name/trade mark: …\n4.\nTyre type description: …\n(a) Manufacturer's name …\n(b) Brand name or trade mark\n(c) Tyre class (in accordance with Regulation (EC) No 661/2009) …\n(d) Tyre-size designation …\n(e) Tyre structure (diagonal (bias-ply); radial) …\n(f) Category of use (normal tyre, snow tyre, special use tyre) …\n(g) Speed category (categories) …\n(h) Load-capacity index (indices) …\n(i) Trade description/commercial name …\n(j) Declared tyre rolling resistance coefficient …\n5.\nTyre identification code(s) and technology(ies) used to provide identification code(s), if applicable:\nTechnology:\nCode:\n…\n…\n6.\nTechnical Service and, where appropriate, test laboratory approved for purposes of approval or of verification of conformity tests: …\n7.\nDeclared values:\n7.1. declared rolling resistance level of the tyre (in N/kN rounded to the first decimal place, in accordance with ISO 80000-1 Appendix B, section B.3, rule B (example 1))\nCr, … [N/kN]\n7.2. tyre test load in accordance with Regulation (EC) No 1222/2009 Annex I part A (85 % of single load, or 85 % of maximum load capacity for single application specified in applicable tyre standards manuals if not marked on tyre.)\nFZTYRE … [N]\n7.3. Alignment equation: …\n8.\nAny remarks: …\n9.\nPlace: …\n10.\nDate: …\n11.\nSignature: …\n12.\nAnnexed to this communication are: …’;\n(4) Appendix 2 is amended as follows:\n(a) SECTION I is amended as follows:\npoints 0.14 and 0.16 are deleted;\n(b) SECTION II is amended as follows:\n(i) point 4 is replaced by the following:\n‘4.\nDate of test report:’;\n(ii) point 8.4 is replaced by the following:\n‘8.4.\nAlignment equation:’;\n(iii) the following point is inserted:\n‘8.5.\nRolling resistance level of the tyre (in N/kN rounded to the first decimal place, in accordance with ISO80000-1 Appendix B, section B.3, rule B (example 1)) Cr,aligned … [N/kN]’;\n(5) Appendix 3 is amended as follows:\n(a) the title is replaced by the following:\n‘ Input parameters for the simulation tool ’;\n(b) in Definitions, point (1) is replaced by the following:\n(1) “Parameter ID” ‘Unique identifier as used in the simulation tool for a specific input parameter or set of input data’;\n(c) in Table 1, the third row ‘TechnicalReportId’ below the title and the last row are replaced by the following:\n‘\nCertificationNumber\nP232\ntoken\nDimension\nP108\nstring\n[-]\nAllowed values (non-exhaustive): “9.00 R20”, “9 R22.5”, “9.5 R17.5”, “10 R17.5”, “10 R22.5”, “10.00 R20”, “11 R22.5”, “11.00 R20”, “11.00 R22.5”, “12 R22.5”, “12.00 R20”, “12.00 R24”, “12.5 R20”, “13 R22.5”, “14.00 R20”, “14.5 R20”, “16.00 R20”, “205/75 R17.5”, “215/75 R17.5”, “225/70 R17.5”, “225/75 R17.5”, “235/75 R17.5”, “245/70 R17.5”, “245/70 R19.5”, “255/70 R22.5”, “265/70 R17.5”, “265/70 R19.5”, “275/70 R22.5”, “275/80 R22.5”, “285/60 R22.5”, “285/70 R19.5”, “295/55 R22.5”, “295/60 R22.5”, “295/80 R22.5”, “305/60 R22.5”, “305/70 R19.5”, “305/70 R22.5”, “305/75 R24.5”, “315/45 R22.5”, “315/60 R22.5”, “315/70 R22.5”, “315/80 R22.5”, “325/95 R24”, “335/80 R20”, “355/50 R22.5”, “365/70 R22.5”, “365/80 R20”, “365/85 R20”, “375/45 R22.5”, “375/50 R22.5”, “375/90 R22.5”, “385/55 R22.5”, “385/65 R22.5”, “395/85 R20”, “425/65 R22.5”, “495/45 R22.5”, “525/65 R20.5”\n’\n(6) in Appendix 4, point 2.1 is replaced by the following:\n‘1.1.\nCertification number for tyres shall comprise the following:\neX*YYYY/YYYY*ZZZZ/ZZZZ*T*0000*00\nSection 1\nSection 2\nSection 3\nAdditional letter to section 3\nSection 4\nSection 5\nIndication of country issuing the certificate\nHDV CO2 certification Regulation (2017/2400)\nLatest amending Regulation (ZZZZ/ZZZZ)\nT = Tyre\nBase certification number 0000\nExtension 00\n’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "“delete as appropriate”"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2019/318/annex/IX",
    "retrieved_at": "2026-11-01T14:43:33.369825+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}