# Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance), Annex IX

Extent: E+W+S+N.I.

Annex X to Regulation (EU) 2017/2400 is amended as follows:
(1) point 3.4.1 is replaced by the following:
‘3.4.1.
The tyre shall be clearly identifiable in respect to the certificate covering it for the corresponding rolling resistance coefficient.’;
(2) in point 3.4.2, the first sentence is replaced by the following:
‘The tyre manufacturer shall use the markings affixed to the side wall of the tyre or affix an additional identifier to the tyre.’;
(3) Appendix 1 is replaced by the following:
‘Appendix 1
MODEL OF A CERTIFICATE OF A COMPONENT, SEPARATE TECHNICAL UNIT OR SYSTEM
Maximum format: A4 (210 × 297 mm)
CERTIFICATE ON CO2 EMISSIONS AND FUEL CONSUMPTION RELATED PROPERTIES OF A TYRE FAMILY
“delete as appropriate”
Communication concerning:
granting
extension
refusal
withdrawal
Administration stamp
of a certificate on CO2 emission and fuel consumption related properties of a tyre family in accordance with Commission Regulation (EU) 2017/2400, as amended by Commission Regulation (EU) 2019/318
Certification number: …
Hash: …
Reason for extension: …
1.
Manufacturer's name and address: …
2.
If applicable, name and address of manufacturer's representative: …
3.
Brand name/trade mark: …
4.
Tyre type description: …
(a) Manufacturer's name …
(b) Brand name or trade mark
(c) Tyre class (in accordance with Regulation (EC) No 661/2009) …
(d) Tyre-size designation …
(e) Tyre structure (diagonal (bias-ply); radial) …
(f) Category of use (normal tyre, snow tyre, special use tyre) …
(g) Speed category (categories) …
(h) Load-capacity index (indices) …
(i) Trade description/commercial name …
(j) Declared tyre rolling resistance coefficient …
5.
Tyre identification code(s) and technology(ies) used to provide identification code(s), if applicable:
Technology:
Code:
…
…
6.
Technical Service and, where appropriate, test laboratory approved for purposes of approval or of verification of conformity tests: …
7.
Declared values:
7.1. declared rolling resistance level of the tyre (in N/kN rounded to the first decimal place, in accordance with ISO 80000-1 Appendix B, section B.3, rule B (example 1))
Cr, … [N/kN]
7.2. tyre test load in accordance with Regulation (EC) No 1222/2009 Annex I part A (85 % of single load, or 85 % of maximum load capacity for single application specified in applicable tyre standards manuals if not marked on tyre.)
FZTYRE … [N]
7.3. Alignment equation: …
8.
Any remarks: …
9.
Place: …
10.
Date: …
11.
Signature: …
12.
Annexed to this communication are: …’;
(4) Appendix 2 is amended as follows:
(a) SECTION I is amended as follows:
points 0.14 and 0.16 are deleted;
(b) SECTION II is amended as follows:
(i) point 4 is replaced by the following:
‘4.
Date of test report:’;
(ii) point 8.4 is replaced by the following:
‘8.4.
Alignment equation:’;
(iii) the following point is inserted:
‘8.5.
Rolling resistance level of the tyre (in N/kN rounded to the first decimal place, in accordance with ISO80000-1 Appendix B, section B.3, rule B (example 1)) Cr,aligned … [N/kN]’;
(5) Appendix 3 is amended as follows:
(a) the title is replaced by the following:
‘ Input parameters for the simulation tool ’;
(b) in Definitions, point (1) is replaced by the following:
(1) “Parameter ID” ‘Unique identifier as used in the simulation tool for a specific input parameter or set of input data’;
(c) in Table 1, the third row ‘TechnicalReportId’ below the title and the last row are replaced by the following:
‘
CertificationNumber
P232
token
Dimension
P108
string
[-]
Allowed values (non-exhaustive): “9.00 R20”, “9 R22.5”, “9.5 R17.5”, “10 R17.5”, “10 R22.5”, “10.00 R20”, “11 R22.5”, “11.00 R20”, “11.00 R22.5”, “12 R22.5”, “12.00 R20”, “12.00 R24”, “12.5 R20”, “13 R22.5”, “14.00 R20”, “14.5 R20”, “16.00 R20”, “205/75 R17.5”, “215/75 R17.5”, “225/70 R17.5”, “225/75 R17.5”, “235/75 R17.5”, “245/70 R17.5”, “245/70 R19.5”, “255/70 R22.5”, “265/70 R17.5”, “265/70 R19.5”, “275/70 R22.5”, “275/80 R22.5”, “285/60 R22.5”, “285/70 R19.5”, “295/55 R22.5”, “295/60 R22.5”, “295/80 R22.5”, “305/60 R22.5”, “305/70 R19.5”, “305/70 R22.5”, “305/75 R24.5”, “315/45 R22.5”, “315/60 R22.5”, “315/70 R22.5”, “315/80 R22.5”, “325/95 R24”, “335/80 R20”, “355/50 R22.5”, “365/70 R22.5”, “365/80 R20”, “365/85 R20”, “375/45 R22.5”, “375/50 R22.5”, “375/90 R22.5”, “385/55 R22.5”, “385/65 R22.5”, “395/85 R20”, “425/65 R22.5”, “495/45 R22.5”, “525/65 R20.5”
’
(6) in Appendix 4, point 2.1 is replaced by the following:
‘1.1.
Certification number for tyres shall comprise the following:
eX*YYYY/YYYY*ZZZZ/ZZZZ*T*0000*00
Section 1
Section 2
Section 3
Additional letter to section 3
Section 4
Section 5
Indication of country issuing the certificate
HDV CO2 certification Regulation (2017/2400)
Latest amending Regulation (ZZZZ/ZZZZ)
T = Tyre
Base certification number 0000
Extension 00
’

---
Source: https://www.legislation.gov.uk/eur/2019/318/annex/IX (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-318/annex-IX
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.