Division 2 Only where source streams or emission sources serve more than one sub-installation, the following approaches for attribution of emissions apply:

Emissions from source streams or emission sources used for the production of measurable heat shall be attributed to sub-installations in accordance with section 10.1.2;

Where waste gases are not used within the product benchmark sub-installation in which it is produced, the emissions stemming from waste gases shall be attributed in accordance with section 10.1.5;

Where the amounts of source streams attributable to sub-installations are determined by metering before the use in the sub-installation, the operator shall apply the appropriate methodology in accordance with section 3.2.

Where emissions from source streams or emission sources cannot be attributed in accordance with other approaches, they shall be attributed using correlated parameters, which have already been attributed to sub-installations in accordance with section 3.2. For that purpose, the operator shall attribute source stream amounts and their respective emissions proportionally to the ratio in which those parameters are attributed to sub-installations. Appropriate parameters include the mass of products produced, mass or volume of fuel or material consumed, amount of non-measurable heat produced, operating hours, or known equipment efficiencies.