Division 2 DEFINITIONS

‘Data set’ for the purposes of this Annex means one type of data, either at installation level or sub-installation level as relevant in the circumstances, as any of the following:

1. (a)

   the amount of fuels or materials consumed or produced by a process as relevant for the calculation-based monitoring methodology, expressed in terajoules, mass in tonnes, or for gases as volume in normal cubic metres, as appropriate, including for waste gases;

2. (b)

   a calculation factor as used by F1the Monitoring and Reporting Regulation 2018 (i.e. composition of a material or fuel or waste gas);

3. (c)

   net quantity of measurable heat, and the relevant parameters required for determining this quantity, in particular:

   • mass flow of heat transfer medium, and

   • enthalpy of transmitted and returned heat transfer medium, as specified by composition, temperature, pressure and saturation;

4. (d)

   quantities of non-measurable heat, specified by the relevant quantities of fuels used for producing the heat, and the net calorific value (NCV) of the fuel mix;

5. (e)

   quantities of electricity;

6. (f)

   quantities of CO₂ transferred between installations.

‘Determination methodology’ means either of the following:

1. (a)

   a methodology of identifying, collecting and processing data already available at the installation for data sets of historical data or;

2. (b)

   a monitoring methodology for a specific data set based on an approved monitoring methodology plan.

In addition, the definitions of ‘source stream’, ‘emission source’, ‘inherent risk’, ‘control risk’ and ‘emission factor’ as set in Article 3 of F2the Monitoring and Reporting Regulation 2018 shall apply.