# Commission Implementing Regulation (EU) 2019/403 of 13 March 2019 granting a Union authorisation for the biocidal product family ‘Deosan Activate BPF based on Iodine’, Division 5.1: Instructions for use

Extent: E+W+S+N.I.

The product must be brought to temperature > 20 °C before use
Pre milking:
Apply product to full length of each teat.
For effective use against bacteria and yeast, product must be left in contact with the skin for at least 30 seconds.
After the appropriate contact time, thoroughly remove the product, using a single service paper towel/cloth to ensure teats are clean and dry.
In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)
Post milking:
Cover the full length of each teat with the product, immediately after milking.
To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes)
In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)

---
Source: https://www.legislation.gov.uk/eur/2019/403/annex/part/II/division/2/division/5/division/5.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-403/annex/part-II/division-2/division-5/division-5.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.