Division 3.1

From 1 March 2020, with the exception of custom made servers, made on a one-off basis, the following product information on servers shall be provided in the instruction manuals for installers and end-users (when present with the product), and on the free-access websites of manufacturers, their authorised representatives and importers from the time a product model is placed on the market until at least eight years after the placing on the market of the last product of a certain product model:

1. (a)

   product type;

2. (b)

   manufacturer's name, registered trade name and registered trade address at which they can be contacted;

3. (c)

   product model number, and if applicable the low-end performance configuration and the high-end performance configuration model numbers;

4. (d)

   year of manufacture;

5. (e)

   PSU efficiency at 10 % (if applicable), 20 %, 50 % and 100 % of rated output power, with the exception of direct current servers, expressed in % and rounded to the first decimal place;

6. (f)

   power factor at 50 % of the rated load level, with the exception of direct current servers, rounded to three decimal places;

7. (g)

   PSU rated power output (Watts), rounded to the nearest integer. If a product model is part of a server product family, all PSUs offered in a server product family shall be reported with the information specified in (e) and (f);

8. (h)

   idle state power, expressed in Watts and rounded to the first decimal place;

9. (i)

   list of all components for additional idle power allowances, if any (additional PSU, HDDs or SSDs, additional memory, additional buffered DDR channels, additional I/O devices);

10. (j)

    maximum power, expressed in Watts and rounded to the first decimal place;

11. (k)

    declared operating condition class, as detailed in Table 6;

12. (l)

    idle state power (Watts) at the higher boundary temperature of the declared operating condition class;

13. (m)

    the active state efficiency and the performance in active state of the server;

14. (n)

    information on the secure data deletion functionality referred to in point 1.2.2 of this Annex, including instructions on how to use the functionality, the techniques used and the supported secure data deletion standard(s), if any;

15. (o)

    for blade servers, a list of recommended combinations with compatible chassis;

16. (p)

    if a product model is part of a server product family, a list of all model configurations that are represented by the model shall be supplied.

If a product model is part of a server product family, the product information required for items e) to m) under point 3.1 shall be reported for the low-end and high-end performance configurations of the server product family.