Division 3.5.3.1 Inland ship static and voyage related data (Inland specific Message FI 10)

United Kingdom

This message shall be used by inland vessels only, to broadcast vessel static and voyage related data in addition to message 5. The message shall be sent with binary message 8 as soon as possible (from the AIS point of view) after message 5.

Table 3.4

Inland vessel data report

	Parameter	Number of bits	Description
Shall be set to 0 if no type approved sensor (e.g. gyro) is connected to the transponder.
	Message ID	6	Identifier for message 8; always 8
	Repeat indicator	2	Used by the repeater to indicate how many times a message has been repeated. 0-3; Default = 0; 3 = do not repeat any more
	Source ID	30	MMSI number
	Spare	2	Not used, shall be set to zero. Reserved for future use
Binary data	Application identifier	16	DAC = 200, FI = 10
	Unique European vessel identification number (ENI)	48	8*6 Bit ASCII characters 00000000 = ENI not assigned = default
	Length of vessel/convoy	13	1 — 8 000 (rest not to be used) length of vessel/convoy in 1/10 m 0 = default
	Beam of vessel/convoy	10	1 — 1 000 (rest not to be used) beam of vessel/convoy in 1/10 m; 0 = default
	Vessel and convoy type	14	Numeric vessel and convoy type as described in Appendix C 0 = not available = default
	Dangerous cargo indication	3	Number of blue cones/lights 0 — 3; 4 = B-Flag, 5 = default = unknown
	Maximum present static draught	11	1 — 2 000 (rest not used) draught in 1/100 m, 0 = default = unknown
	Loaded/unloaded	2	1 = loaded, 2 = unloaded, 0 = not available/default, 3 shall not be used
	Quality of speed information	1	1 = high, 0 = low/GNSS = default^f1
	Quality of course information	1	1 = high, 0 = low/GNSS = default
	Quality of heading information	1	1 = high, 0 = low = default
	Spare	8	Not used, shall be set to zero. Reserved for future use
	Total	168	Occupies one slot

Annotations

Footnotes

f1: Shall be set to 0 if no type approved sensor (e.g. gyro) is connected to the transponder.