# Commission Delegated Regulation (EU) 2019/888 of 13 March 2019 amending Annex I to Regulation (EU) 2018/956 of the European Parliament and of the Council as regards the data on new heavy-duty vehicles to be monitored and reported by Member States and by manufacturers (Text with EEA relevance), Annex

Extent: E+W+S+N.I.

Annex I to Regulation (EU) 2018/956 is amended as follows:
(1) Part A is amended as follows:
(a) point (d) is replaced by the following:
‘(d)
for vehicles registered until 31 December 2019 where available, and for vehicles registered from 1 January 2020 in all cases, the code for the bodywork as specified in entry 38 of the certificate of conformity, including, where applicable, the supplementing digits referred to in Appendix 2 to Annex II to Directive 2007/46/EC;’
(b) the following point (f) is added:
‘(f)
for vehicles registered from 1 January 2020, the maximum speed of the vehicle as specified in entry 29 of the certificate of conformity.’
(2) in Part B, point 2 is amended as follows:
(a) entry 5 is replaced by the following:
No
Monitoring parameters
Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified
Description
‘5
Axle certification number
1.7.2
Axle specifications’;
(b) entry 15 is replaced by the following:
No
Monitoring parameters
Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified
Description
‘15
Make (trade name of manufacturer)
—
Vehicle specifications’;
(c) entry 21 is replaced by the following:
No
Monitoring parameters
Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified
Description
‘21
Fuel type (Diesel CI/CNG PI/LNG PI …)
1.2.7
Engine specifications’;
(d) entry 73 is replaced by the following:
No
Monitoring parameters
Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified
Description
‘73
Cryptographic hash of the manufacturer's records file
3.1.4
Software information’;
(e) the following entries 79 to 100 are added:
Data entries 85, 86, 87, 90, 93, 95 and 96 shall not be made publicly available in the Central Register on heavy-duty vehicles.’
No
Monitoring parameters
Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified
Description
‘79
Vehicle model
1.1.2
Vehicle specifications
80
Vocational vehicle (yes/no)
1.1.9
81
Zero emission heavy-duty vehicle (yes/no)
1.1.10
82
Hybrid electric heavy-duty vehicle (yes/no)
1.1.11
83
Dual-fuel vehicle (yes/no)
1.1.12
84
Sleeper cab (yes/no)
1.11.13
85
Engine model
1.2.1
Engine specifications
86
Transmission model
1.3.1
Transmission specifications
87
Retarder model
1.4.1
Retarder specifications
88
Retarder certification number
1.4.2
89
Certification option used for generation of a loss map (standard values/measurement)
1.4.3
90
Torque converter model
1.5.1
Torque converter specifications
91
Torque converter certification number
1.5.2
92
Certification option used for generation of a loss map (standard values/measurement)
1.5.3
93
Angle drive model
1.6.1
Angle drive specifications
94
Angle drive certification number
1.6.2
95
Axle model
1.7.1
Axle specifications
96
Air drag model
1.8.1
Aerodynamics
97
Engine stop-start during vehicle stops (yes/no)
1.12.1
Advanced driver assistance systems (ADAS)
98
Eco-roll without engine stop-start (yes/no)
1.12.2
99
Eco-roll with engine stop-start (yes/no)
1.12.3
100
Predictive cruise control (yes/no)
1.12.4

---
Source: https://www.legislation.gov.uk/eur/2019/888/annex (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-888/annex
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.