Article 6 Obligations of manufacturers

When placing their product on the F2... market, manufacturers shall ensure that it has been designed and manufactured in compliance with the requirements set out in Parts 1 to 6, 16 and 17 of the Annex.

Manufacturers shall draw up the technical documentation provided for in Article 17 and carry out the relevant conformity assessment procedure referred to in Article 13 or have it outsourced.

Where compliance of the product with the requirements set out in Parts 1 to 6, 16 and 17 of the Annex has been demonstrated by that conformity assessment procedure, manufacturers shall draw up F3a declaration of conformity and affix the F4UK marking.

Manufacturers shall keep the technical documentation and the F5... declaration of conformity for 10 years after the product has been placed on the market.

Manufacturers shall ensure that procedures are in place for series production to remain in conformity with this Chapter. Changes in product design, characteristics or software, and changes in the harmonised standards or in technical specifications by reference to which conformity of a product is declared shall be adequately taken into account.

When deemed appropriate with regard to the risks presented by a product, manufacturers shall, to protect the health and safety of consumers, carry out sample testing of marketed products, investigate, and, if necessary, keep a register of complaints, of non-conforming products and product recalls and shall keep distributors informed of any such monitoring.

Manufacturers of UAS shall ensure that the UA bears a type F6... and a unique serial number allowing for its identification, and if applicable, compliant with the requirements defined in the corresponding Parts F71 to 5, 16 and 17 of the Annex. Manufacturers of class F8UK5 accessories kits shall ensure that the kits bears a type and a unique serial number allowing for their identification. Manufacturers of remote identification add-ons shall ensure that the remote identification add-on bears a type and a unique serial number allowing for their identification and compliant with the requirements defined in Part 6 of the Annex. In all cases, manufacturers shall ensure that a unique serial number is also affixed to the F9... declaration of conformity or to the simplified ... declaration of conformity referred to in Article 14.

Manufacturers shall indicate on the product their name, registered trade name or registered trademark, website address and the postal address at which they can be contacted or, where that is not possible, on its packaging, or in a document accompanying it. The address shall indicate a single point at which the manufacturer can be contacted. The contact details shall be indicated F10English.

Manufacturers shall ensure that the product is accompanied by the manufacturers’ instructions and information notice required by Parts 1 to 6, 16 and 17 of the Annex in F11English. Such manufacturers’ instructions and information notice, as well as any labelling, shall be clear, understandable and legible.

Manufacturers shall ensure that each product is accompanied by a copy of the F12... declaration of conformity or by a simplified ... declaration of conformity. Where a simplified ... declaration of conformity is provided, it shall contain the exact internet address where the full text of the ... declaration of conformity can be obtained.

Manufacturers who consider or have reason to believe that products which they have placed on the market are not in conformity with this Chapter shall immediately take the corrective measures necessary to bring that product into conformity, to withdraw it or recall it, if appropriate. Where the product presents a risk, manufacturers shall immediately inform the F13market surveillance authoritiesF14... to that effect, giving details, in particular, of the non-compliance, of any corrective measures taken and of the results thereof.

Manufacturers shall, further to a reasoned request from F15a market surveillance authority, provide it with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of the product with this Chapter, in F16English. They shall cooperate with that authority, at its request, on any action taken to eliminate the risks posed by the product which they have placed on the market.

When placing on the market a class F18UK5 or F19UK6 UAS or a class UK5 add-on, manufacturers shall inform the market surveillance authority F20....

Where a manufacturer places a product of a particular type on the market for the first time, the manufacturer must give a market surveillance authority a notice consisting of—