# Commission Implementing Regulation (EU) 2020/1187 of 7 August 2020 granting a Union authorisation for the biocidal product family ‘Iodine based products – CID LINES NV’ (Text with EEA relevance), Division 5.1: Instructions for use

Extent: E+W+S+N.I.

The product must be diluted before use in order to allow a final concentration of iodine of 0,3 %. The product should be diluted to 11 % (110mL product, add water up to 1 L).
Do not prepare more fluid than necessary. Assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.
Use gloves and eye protection during the dilution step. The diluted product can be kept and used for 1 week.
The product must be brought to a temperature above 20 °C before use.
Apply the diluted product on the teats with a manual sprayer or with an automatic sprayer.
The product should be used directly after milking 2 times per day by using a manual sprayer and 3 times per day by using a robot (automatic sprayer). Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.

---
Source: https://www.legislation.gov.uk/eur/2020/1187/annex/part/II/division/10/division/5/division/5.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2020-1187/annex/part-II/division-10/division-5/division-5.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.