# Commission Implementing Regulation (EU) 2020/1187 of 7 August 2020 granting a Union authorisation for the biocidal product family ‘Iodine based products – CID LINES NV’ (Text with EEA relevance), Division 5.1: Instructions for use

Extent: E+W+S+N.I.

The product must be brought to a temperature above 20 °C before use.
Apply the product by dipping or by spraying:
By dipping: Apply the product with a dip cup. Wash the dip cup with water after use.
By spraying: Apply the product with a manual sprayer or with an automatic sprayer.
Do not prepare more fluid than necessary; assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.
The product should be used immediately after each milking: 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.

---
Source: https://www.legislation.gov.uk/eur/2020/1187/annex/part/II/division/2/division/5/division/5.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2020-1187/annex/part-II/division-2/division-5/division-5.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.