# Commission Implementing Regulation (EU) 2020/1187 of 7 August 2020 granting a Union authorisation for the biocidal product family ‘Iodine based products – CID LINES NV’ (Text with EEA relevance), Division 4.1.1: Use-specific instructions for use

Extent: E+W+S+N.I.

Use in professional kitchens (PT4) and in food industry (PT4):
The product must be diluted with water before use (according to the table below).
Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.
The product is used in professional kitchens (surface disinfection): Frequency is once per day.
The product is used in food industry (surface disinfection): Frequency is once per day.
Use at room temperature.
Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 15 minutes and rinse the surfaces afterwards with clean water.
Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 1,8 to 2,49 % it is not possible to indicate all product dilutions here.
Example for a product containing 1 % iodine
Dilution of the product
Contact time
Bactericidal and yeasticidal activity
1,5 % (15 ml product, add water up to 1 L)
15 min
Do not mix with other chemicals.
Do not prepare more fluid than necessary.

---
Source: https://www.legislation.gov.uk/eur/2020/1187/annex/part/II/division/7/division/4/division/4.1/division/4.1.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2020-1187/annex/part-II/division-7/division-4/division-4.1/division-4.1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

