OpenLegislation

Division 4.1.1 Use-specific instructions for use

United Kingdom

Original text. Later amendments are not shown.

  • Use in professional kitchens (PT4) and in food industry (PT4):

  • The product must be diluted with water before use (according to table below).

  • Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.

  • The product is used in professional kitchens (surface disinfection): Frequency is once per day.

  • The product is used in food industry (surface disinfection): Frequency is once per day.

  • Use at room temperature.

  • The product is applied by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 15 minutes, and rinse the surfaces afterwards with clean water.

Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 2,5 to 3 % it is not possible to indicate all product dilutions here.

Example for a product containing 3 % iodinef1 Dilution of the productContact time
Bactericidal and yeasticidal activity0,5 % (5 ml product, add water up to 1 L)15 min

Do not mix with other chemicals.

Do not prepare more fluid than necessary.

Annotations

Footnotes

f1

Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 2,5 to 3 % it is not possible to indicate all product dilutions here.