Division 4.2.1 Use-specific instructions for use
United Kingdom
Use in veterinary field (PT3), surface disinfection:
The product must be diluted with water before use (according to table below).
Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.
The product is used to disinfect animal housings of pigs, cows and poultry.
Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 30 minutes. Animal housing must be empty of animals during application and re-entry of animals can be done 24h after the end of the application.
| Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 2,5 to 3 % it is not possible to indicate all product dilutions here. | ||
| Example for a product containing 2,5 % iodinef1 | Dilution of the product | Contact time |
| Bactericidal and yeasticidal activity | 1 % (10ml product, add water up to 1 L) | 30 min |
| Virucidal activity | 1,4 % (14ml product, add water up to 1 L) | 30 min |
Do not mix with other chemicals.
Do not prepare more fluid than necessary.
Annotations
Footnotes
- f1
-
Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 2,5 to 3 % it is not possible to indicate all product dilutions here.