{
  "url": "https://openlegislation.uk/eu-regulation-2020-2231/annex",
  "json_url": "https://openlegislation.uk/eu-regulation-2020-2231/annex.json",
  "legislation": "eur/2020/2231",
  "legislation_title": "Council Regulation (EU) 2020/2231 of 18 December 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2020-2231",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "The Annex to Regulation (EU) No 1387/2013 is amended as follows:\n(1) the entries with the following serial numbers are deleted:\n0.3338, 0.3662, 0.4675, 0.4795, 0.4856, 0.4891, 0.4902, 0.4903, 0.4905, 0.4908, 0.4911, 0.4920, 0.4926, 0.4935, 0.4939, 0.4943, 0.4973, 0.4995, 0.5012, 0.5022, 0.5039, 0.5043, 0.5052, 0.5053, 0.5067, 0.5092, 0.5103, 0.5123, 0.5125, 0.5126, 0.5311, 0.5498, 0.5953, 0.6036, 0.6068, 0.6087, 0.6450, 0.6527, 0.6591, 0.6592, 0.6595, 0.6596, 0.6597, 0.6606, 0.6607, 0.6608, 0.6610, 0.6615, 0.6616, 0.6619, 0.6626, 0.6636, 0.6639, 0.6651, 0.6653, 0.6665, 0.6676, 0.6694, 0.6697, 0.6704, 0.6705, 0.6715, 0.6724, 0.6727, 0.6731, 0.6733, 0.6735, 0.6743, 0.6744, 0.6755, 0.6756, 0.6758, 0.6760, 0.6768, 0.6775, 0.6776, 0.6778, 0.6780, 0.6785, 0.6786, 0.6787, 0.6788, 0.6795, 0.6798, 0.6803, 0.6807, 0.6811, 0.6832, 0.6833, 0.6834, 0.6838, 0.6841, 0.6883, 0.6890, 0.6895, 0.6900, 0.6902, 0.6909, 0.6914, 0.6916, 0.6918, 0.6928, 0.6941, 0.6942, 0.6943, 0.6944, 0.6953, 0.6954, 0.7040, 0.7222, 0.7293, 0.7558, 0.7560, 0.7697, 0.7715 and 0.7855;\n(2) the following entries replace those entries that have the same serial numbers:\nHowever, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.\nSuspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).\nOnly the ad valorem duty is suspended. The specific duty shall continue to apply.’;\nSerial Number\nCN code\nTARIC\nDescription\nRate of autonomous duty\nSupplementary Unit\nDate foreseen for mandatory review\n‘0.6748\nex 0709 59 10\n10\nFresh or chilled chanterelles for treatment other than simple repacking for retail sale\n0 %\n-\n31.12.2025\n0.2864\nex 1511 90 19\nex 1511 90 91\nex 1513 11 10\nex 1513 19 30\nex 1513 21 10\nex 1513 29 30\n20\n20\n20\n20\n20\n20\nPalm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:\nindustrial monocarboxylic fatty acids of subheading 3823 19 10,\nmethyl esters of fatty acids of heading 2915 or 2916,\nfatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,\nfatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,\nstearic acid of subheading 3823 11 00,\ngoods of heading 3401, or\nfatty acids with high purity of heading 2915\n0 %\n-\n31.12.2021\n0.6789\nex 1512 19 10\n10\nRefined safflower oil (CAS RN 8001-23-8) for use in the manufacture of\nconjugated linoleic acid of heading 3823 or\nethyl- or methyl esters of linoleic acid of heading 2916\n0 %\n-\n31.12.2022\n0.5004\nex 2008 99 48\n94\nMango puree:\nnot from concentrate,\nof the genus Mangifera,\nof a Brix value of 14 or more, but not more than 20,\nused in the manufacture of products of drink industry\n6 %\n-\n31.12.2022\n0.4709\nex 2008 99 49\nex 2008 99 99\n30\n40\nSeedless boysenberry puree not containing added spirit, whether or not containing added sugar\n0 %\n-\n31.12.2025\n0.6723\nex 2008 99 91\n20\nChinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking\n0 %\n-\n31.12.2025\n0.4992\nex 2009 41 92\nex 2009 41 99\n20\n70\nPineapple juice:\nnot from concentrate,\nof the genus Ananas,\nof a Brix value of 11 or more but not more than 16,\nused in the manufacture of products of drink industry\n8 %\n-\n31.12.2025\n0.7393\nex 2712 90 99\n10\nBlend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms\n0 %\n-\n31.12.2022\n0.6658\nex 2805 12 00\n10\nCalcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)\n0 %\n-\n31.12.2025\n0.4979\n2805 30 20\n2805 30 30\n2805 30 40\nRare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.6836\nex 2811 22 00\n15\nAmorphous silicon dioxide (CAS RN 60676-86-0)\nin the form of powder\nof a purity by weight of 99,0 % or more\nwith a median grain size of 0,7 μm or more, but not more than 2,1 μm\nwhere 70 % of the particles have a diameter of not more than 3 μm\n0 %\n-\n31.12.2022\n0.5110\nex 2818 10 91\n20\nSintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:\n94 % or more, but less than 98,5 % of aluminium oxide,\n2 % (± 1,5 %) of magnesium oxide,\n1 % (± 0,6 %) of yttrium oxide,\nand\neither 2 % (± 1,2 %) of lanthanum oxide, or\n2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,\nwith less than 50 % of the total weight having a particle size of more than 10 mm\n0 %\n-\n31.12.2025\n0.6837\nex 2818 30 00\n20\nAluminium hydroxide (CAS RN 21645-51-2)\nin the form of powder,\nwith a purity by weight of 99,5 % or more,\nwith a decomposition point of 263°C or more,\nwith a particle size of 4 μm (± 1 μm),\nwith a Total-Na2O-content by weight of not more than 0,06 %\n0 %\n-\n31.12.2025\n0.7897\nex 2825 20 00\n10\nLithium hydroxide monohydrate (CAS RN 1310-66-3)\n2.6 %\n-\n31.12.2021\n0.6819\nex 2825 50 00\n30\nCopper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm\n0 %\n-\n31.12.2025\n0.5055\nex 2826 19 90\n10\nTungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more\n0 %\n-\n31.12.2025\n0.5090\nex 2833 29 80\n30\nZirconium sulphate (CAS RN 14644-61-2)\n0 %\n-\n31.12.2021\n0.6632\nex 2840 20 90\n10\nZinc borate (CAS RN 12767-90-7)\n0 %\n-\n31.12.2025\n0.7288\nex 2841 50 00\n11\nPotassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more\n2 %\n-\n31.12.2021\n0.4222\nex 2841 90 85\n10\nLithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %\n2.7 %\n-\n31.12.2021\n0.3419\nex 2850 00 20\n80\nArsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more\n0 %\n-\n31.12.2024\n0.6633\n2903 39 21\nDifluoromethane (CAS RN 75-10-5)\n0 %\n-\n31.12.2025\n0.2583\nex 2903 89 80\n45\n1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more\n2 %\n-\n31.12.2021\n0.6611\nex 2903 99 80\n15\n4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)\n0 %\n-\n31.12.2025\n0.3409\nex 2904 20 00\n10\nNitromethane (CAS RN 75-52-5)\n0 %\n-\n31.12.2025\n0.3391\nex 2904 20 00\n20\nNitroethane (CAS RN 79-24-3)\n0 %\n-\n31.12.2022\n0.3408\nex 2904 20 00\n30\n1-Nitropropane (CAS RN 108-03-2)\n0 %\n-\n31.12.2025\n0.6612\nex 2904 99 00\n25\nDifluoromethanesulphonyl chloride (CAS RN 1512-30-7)\n0 %\n-\n31.12.2025\n0.6613\nex 2904 99 00\n35\n1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)\n0 %\n-\n31.12.2025\n0.4934\nex 2905 39 95\n10\nPropane-1,3-diol (CAS RN 504-63-2)\n0 %\n-\n31.12.2025\n0.6757\nex 2906 29 00\n40\n2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)\n0 %\n-\n31.12.2022\n0.6782\nex 2908 19 00\n40\n3,4,5-Trifluorophenol (CAS RN 99627-05-1)\n0 %\n-\n31.12.2025\n0.6915\nex 2908 19 00\n50\n4-Fluorophenol (CAS RN 371-41-5)\n0 %\n-\n31.12.2025\n0.6649\nex 2909 30 38\n30\n1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)\n0 %\n-\n31.12.2025\n0.5117\nex 2909 30 90\n30\n3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)\n0 %\n-\n31.12.2025\n0.6614\nex 2909 30 90\n40\n1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)\n0 %\n-\n31.12.2025\n0.6783\nex 2909 30 90\n50\n1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)\n0 %\n-\n31.12.2025\n0.6784\nex 2909 30 90\n60\n1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)\n0 %\n-\n31.12.2025\n0.6927\nex 2909 49 80\n10\n1-Propoxypropan-2-ol (CAS RN 1569-01-3)\n0 %\n-\n31.12.2021\n0.6660\nex 2910 90 00\n50\n2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)\n0 %\n-\n31.12.2025\n0.5135\nex 2912 49 00\n30\nSalicylaldehyde (CAS RN 90-02-8)\n0 %\n-\n31.12.2025\n0.6678\nex 2912 49 00\n40\n3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)\n0 %\n-\n31.12.2025\n0.4933\nex 2914 29 00\n30\n(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)\n0 %\n-\n31.12.2025\n0.4932\nex 2914 50 00\n20\n3'-Hydroxyacetophenone (CAS RN 121-71-1)\n0 %\n-\n31.12.2025\n0.6762\nex 2914 50 00\n75\n7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)\n0 %\n-\n31.12.2022\n0.4948\nex 2914 79 00\n60\n4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)\n0 %\n-\n31.12.2021\n0.5119\nex 2915 39 00\n60\nDodec-8-enyl acetate (CAS RN 28079-04-1)\n0 %\n-\n31.12.2025\n0.5121\nex 2915 39 00\n65\nDodeca-7,9-dienyl acetate (CAS RN 54364-62-4)\n0 %\n-\n31.12.2025\n0.5120\nex 2915 39 00\n70\nDodec-9-enyl acetate (CAS RN 16974-11-1)\n0 %\n-\n31.12.2025\n0.7541\nex 2915 90 30\n10\nMethyl laurate (CAS RN 111-82-0)\n0 %\n-\n31.12.2025\n0.4954\nex 2915 90 70\n60\nEthyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)\n0 %\n-\n31.12.2025\n0.3466\nex 2916 13 00\n30\nZinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities\n0 %\n-\n31.12.2025\n0.4931\nex 2916 20 00\n60\n3-Cyclohexylpropionic acid (CAS RN 701-97-3)\n0 %\n-\n31.12.2025\n0.4930\nex 2916 39 90\n30\n2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)\n0 %\n-\n31.12.2025\n0.6794\nex 2916 39 90\n41\n4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)\n0 %\n-\n31.12.2025\n0.6661\nex 2916 39 90\n53\n5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)\n0 %\n-\n31.12.2025\n0.4918\nex 2917 19 80\n50\nTetradecanedioic acid (CAS RN 821-38-5)\n0 %\n-\n31.12.2025\n0.4945\nex 2917 39 95\n20\nDibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)\n0 %\n-\n31.12.2025\n0.6796\nex 2917 39 95\n25\nNaphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)\n0 %\n-\n31.12.2025\n0.3640\nex 2917 39 95\n30\nBenzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)\n0 %\n-\n31.12.2025\n0.6800\nex 2917 39 95\n35\n1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)\n0 %\n-\n31.12.2025\n0.6814\nex 2918 99 90\n13\n3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)\n0 %\n-\n31.12.2025\n0.6901\nex 2918 99 90\n18\nEthyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)\n0 %\n-\n31.12.2025\n0.6747\nex 2918 99 90\n85\nTrinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more\n0 %\n-\n31.12.2025\n0.5038\nex 2920 29 00\n20\nTris(methylphenyl)phosphite (CAS RN 25586-42-9)\n0 %\n-\n31.12.2025\n0.5045\nex 2920 29 00\n40\nBis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)\n0 %\n-\n31.12.2025\n0.7559\nex 2920 90 10\n15\nEthyl methyl carbonate (CAS RN 623-53-0)\n3.2 %\n-\n31.12.2021\n0.6598\nex 2920 90 70\n80\nBis(pinacolato)diboron (CAS RN 73183-34-3)\n0 %\n-\n31.12.2025\n0.4917\nex 2921 29 00\n40\nDecamethylenediamine (CAS RN 646-25-3)\n0 %\n-\n31.12.2025\n0.4862\nex 2921 30 99\n30\n1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)\n0 %\n-\n31.12.2021\n0.5124\nex 2921 43 00\n60\n3-Aminobenzotrifluoride (CAS RN 98-16-8)\n0 %\n-\n31.12.2025\n0.6825\nex 2921 49 00\n60\n2,6-Diisopropylaniline (CAS RN 24544-04-5)\n0 %\n-\n31.12.2025\n0.6947\nex 2922 19 00\n35\n2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)\n0 %\n-\n31.12.2025\n0.6624\nex 2922 29 00\n30\n1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)\n0 %\n-\n31.12.2025\n0.6634\nex 2922 29 00\n63\nAclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.4956\nex 2922 29 00\n75\n4-(2-Aminoethyl)phenol (CAS RN 51-67-2)\n0 %\n-\n31.12.2025\n0.4914\nex 2922 39 00\n20\n2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)\n0 %\n-\n31.12.2025\n0.6761\nex 2922 39 00\n35\n5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)\n0 %\n-\n31.12.2025\n0.7853\nex 2922 49 85\n13\nBenzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more\n0 %\n-\n31.12.2024\n0.5037\nex 2922 49 85\n17\nGlycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)\n0 %\n-\n31.12.2025\n0.6948\nex 2922 49 85\n30\nAqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)\n0 %\n-\n31.12.2021\n0.6650\nex 2922 49 85\n65\nDiethyl aminomalonate hydrochloride (CAS RN 13433-00-6)\n0 %\n-\n31.12.2025\n0.5063\nex 2923 90 00\n75\nTetraethylammonium hydroxide, in the form of an aqueous solution containing:\n35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,\nnot more than 1 000 mg/kg of chloride,\nnot more than 2 mg/kg of iron, and\nnot more than 10 mg/kg of potassium\n0 %\n-\n31.12.2025\n0.3689\nex 2924 19 00\n23\nAcrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more\n2 %\n-\n31.12.2021\n0.5066\nex 2924 29 70\n40\nN,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)\n0 %\n-\n31.12.2025\n0.5127\nex 2924 29 70\n45\nPropoxur (ISO) (CAS RN 114-26-1)\n0 %\n-\n31.12.2025\n0.5069\nex 2924 29 70\n55\nN,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)\n0 %\n-\n31.12.2025\n0.6767\nex 2924 29 70\n62\n2-Chlorobenzamide (CAS RN 609-66-5)\n0 %\n-\n31.12.2025\n0.6766\nex 2924 29 70\n64\nN-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)\n0 %\n-\n31.12.2025\n0.6934\nex 2926 90 70\n17\nCypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more\n0 %\n-\n31.12.2025\n0.6259\nex 2926 90 70\n26\nCyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products\n0 %\n-\n31.12.2024\n0.6871\nex 2928 00 90\n23\nMetobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.4929\nex 2928 00 90\n25\nAcetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution\n0 %\n-\n31.12.2025\n0.6635\nex 2928 00 90\n50\nAqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %\n0 %\n-\n31.12.2025\n0.5035\nex 2930 90 98\n10\n2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)\n0 %\n-\n31.12.2022\n0.6769\nex 2930 90 98\n22\nTembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more\n0 %\n-\n31.12.2025\n0.6873\nex 2930 90 98\n26\nFolpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more\n0 %\n-\n31.12.2025\n0.6617\nex 2930 90 98\n53\nBis(4-chlorophenyl) sulphone (CAS RN 80-07-9)\n0 %\n-\n31.12.2025\n0.5114\nex 2930 90 98\n55\nThiourea (CAS RN 62-56-6)\n0 %\n-\n31.12.2025\n0.6917\nex 2931 90 00\n63\nChloroethenyldimethylsilane (CAS RN 1719-58-0)\n0 %\n-\n31.12.2021\n0.6946\nex 2931 90 00\n65\nBis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)\n0 %\n-\n31.12.2021\n0.6620\nex 2932 20 90\n65\nSodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)\n0 %\n-\n31.12.2025\n0.7639\nex 2932 99 00\n27\n(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2023\n0.4907\nex 2932 99 00\n50\n7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)\n0 %\n-\n31.12.2021\n0.6771\nex 2932 99 00\n65\n4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)\n0 %\n-\n31.12.2025\n0.7811\nex 2933 19 90\n33\nFipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine\n0 %\n-\n31.12.2024\n0.6835\nex 2933 21 00\n55\n1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)\n0 %\n-\n31.12.2025\n0.5115\nex 2933 21 00\n80\n5,5-Dimethylhydantoin (CAS RN 77-71-4)\n0 %\n-\n31.12.2025\n0.6812\nex 2933 39 99\n14\nN,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)\n0 %\n-\n31.12.2022\n0.4842\nex 2933 39 99\n20\nCopper pyrithione powder (CAS RN 14915-37-8)\n0 %\n-\n31.12.2021\n0.6813\nex 2933 39 99\n26\n2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)\n0 %\n-\n31.12.2022\n0.5129\nex 2933 39 99\n85\n2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)\n0 %\n-\n31.12.2025\n0.6773\nex 2933 49 10\n50\n1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)\n0 %\n-\n31.12.2025\n0.4927\nex 2933 49 90\n30\nQuinoline (CAS RN 91-22-5)\n0 %\n-\n31.12.2025\n0.6763\nex 2933 59 95\n21\nN-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)\n0 %\n-\n31.12.2025\n0.6677\nex 2933 59 95\n47\n6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more\n0 %\n-\n31.12.2025\n0.6774\nex 2933 69 80\n13\nMetribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more\n0 %\n-\n31.12.2025\n0.6621\nex 2933 69 80\n15\n2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)\n0 %\n-\n31.12.2025\n0.6951\nex 2933 69 80\n17\nBenzoguanamine (CAS RN 91-76-9)\n0 %\n-\n31.12.2021\n0.5131\nex 2933 69 80\n55\nTerbutryn (ISO) (CAS RN 886-50-0)\n0 %\n-\n31.12.2025\n0.4957\nex 2933 69 80\n60\nCyanuric acid (CAS RN 108-80-5)\n0 %\n-\n31.12.2025\n0.4985\nex 2933 79 00\n70\n(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)\n0 %\n-\n31.12.2025\n0.6872\nex 2933 99 80\n16\nPyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more\n0 %\n-\n31.12.2025\n0.6829\nex 2933 99 80\n21\n1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)\n0 %\n-\n31.12.2025\n0.6599\nex 2933 99 80\n54\n3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)\n0 %\n-\n31.12.2025\n0.6933\nex 2933 99 80\n87\nCarfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more\n0 %\n-\n31.12.2025\n0.4955\nex 2934 20 80\n60\nBenzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)\n0 %\n-\n31.12.2022\n0.4910\nex 2934 20 80\n70\nN,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)\n0 %\n-\n31.12.2025\n0.4942\nex 2934 99 90\n25\n2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)\n0 %\n-\n31.12.2025\n0.6824\nex 2934 99 90\n39\n4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)\n0 %\n-\n31.12.2025\n0.6823\nex 2934 99 90\n41\n11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)\n0 %\n-\n31.12.2025\n0.6893\nex 2934 99 90\n44\nPropiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more\n0 %\n-\n31.12.2025\n0.5133\nex 2934 99 90\n86\nDithianon (ISO) (CAS RN 3347-22-6)\n0 %\n-\n31.12.2025\n0.5136\nex 2934 99 90\n87\n2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)\n0 %\n-\n31.12.2025\n0.5036\nex 2935 90 90\n42\nPenoxsulam (ISO) (CAS RN 219714-96-2)\n0 %\n-\n31.12.2025\n0.6777\nex 2935 90 90\n54\nPropoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.6802\nex 2935 90 90\n56\nN-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)\n0 %\n-\n31.12.2025\n0.6903\nex 2935 90 90\n57\nN-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)\n0 %\n-\n31.12.2025\n0.6664\nex 2935 90 90\n59\nFlazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more\n0 %\n-\n31.12.2025\n0.4944\nex 2938 90 30\n10\nAmmonium glycyrrhizate (CAS RN 53956-04-0)\n0 %\n-\n31.12.2025\n0.6600\nex 3201 90 90\nex 3202 90 00\n40\n10\nReaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)\n0 %\n-\n31.12.2021\n0.5091\nex 3204 11 00\n20\nColourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight\n0 %\n-\n31.12.2021\n0.5134\nex 3204 11 00\n45\nPreparation of dispersion dyes, containing:\nC.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),\nC.I. Disperse Blue 291:1 (CAS RN 872142-01-3),\nC.I. Disperse Violet 93:1 (CAS RN 122463-28-9),\nwhether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)\n0 %\n-\n31.12.2025\n0.6652\nex 3204 12 00\n70\nColourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight\n0 %\n-\n31.12.2025\n0.6603\nex 3204 17 00\n33\nColourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight\n0 %\n-\n31.12.2025\n0.5100\nex 3204 19 00\n73\nColourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight\n0 %\n-\n31.12.2021\n0.6726\nex 3208 90 19\n55\nPreparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent\n0 %\n-\n31.12.2021\n0.5031\nex 3215 90 70\n40\nDry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:\nwax\na vinyl-based polymer and\na colouring agent\nfor use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices\n0 %\n-\n31.12.2025\n0.4863\nex 3402 11 90\n10\nSodium lauroyl methyl isethionate\n0 %\n-\n31.12.2021\n0.6725\nex 3506 91 90\n50\nPreparation containing by weight:\n15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and\n10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,\ndissolved in:\nMethyl ethyl ketone (CAS RN 78-93-3),\nHeptane (CAS RN 142-82-5), and\nToluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)\n0 %\n-\n31.12.2021\n0.6759\nex 3802 10 00\n10\nMixture of activated carbon and polyethylene, in form of powder\n0 %\n-\n31.12.2025\n0.6874\nex 3808 92 30\n10\nMancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more\n0 %\n-\n31.12.2025\n0.5048\nex 3808 93 90\n20\nPreparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:\n1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine\nof a kind used in plant growth regulators\n0 %\n-\n31.12.2025\n0.5030\nex 3808 93 90\n30\nAqueous solution containing by weight:\n1,8 % of sodium para-nitrophenolate,\n1,2 % of sodium ortho-nitrophenolate,\n0,6 % of sodium 5-nitroguaiacolate,\nfor use in the manufacture of a plant growth regulator\n0 %\n-\n31.12.2022\n0.5088\nex 3808 93 90\n50\nPreparation in the form of powder, containing by weight:\n55 % or more of Gibberellin A4,\n1 % or more but not more than 35 % of Gibberellin A7,\n90 % or more of Gibberellin A4 and Gibberellin A7 combined,\nnot more than 10 % of a combination of water and other naturally occurring Gibberellins,\nof a kind used in plant growth regulators\n0 %\n-\n31.12.2021\n0.6532\nex 3808 94 20\n30\nBromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:\n1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),\n1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),\n1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or\n1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)\n0 %\n-\n31.12.2024\n0.6904\nex 3811 21 00\n12\nDispersing agent containing :\nesters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),\n35 % or more but not more than 55 % by weight of mineral oils, and\nwith a chlorine content of not more than 0,05 % by weight,\nused in the manufacture of blends of additives for lubricating oils\n0 %\n-\n31.12.2025\n0.6906\nex 3811 21 00\n14\nDispersing agent :\ncontaining polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),\ncontaining 35 % or more but not more than 55 % by weight of mineral oils,\nwith a chlorine content by weight of not more than 0,05 %,\nhaving a total base number of less than 15,\nused in the manufacture of blends of additives for lubricating oils\n0 %\n-\n31.12.2025\n0.6907\nex 3811 21 00\n16\nDetergent containing :\nCalcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)\n40 % or more but not more than 60 % by weight of mineral oils and\nhaving a total base number more than 120\nused in the manufacture of blends of additives for lubricating oils\n0 %\n-\n31.12.2025\n0.6905\nex 3811 21 00\n18\nDetergent containing :\nlong chain alkyltoluene calcium sulphonates,\nmore than 30 % but not more than 50 % by weight of mineral oils, and\nhaving a total base number of more than 310 but not more than 340,\nused in the manufacture of blends of additives for lubricating oils\n0 %\n-\n31.12.2025\n0.6671\nex 3811 21 00\n75\nAdditives containing:\nCalcium (C10-C14) dialkylbenzenesulfonates,\nmore than 40 %, but not more than 60 % by weight of mineral oils,\nwith a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils\n0 %\n-\n31.12.2022\n0.6669\nex 3811 21 00\n77\nAntifoam additives consisting of:\na copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and\nmore than 50 % but not more than 80 % by weight of mineral oils,\nfor use in the manufacture of additive blends for lubricating oils\n0 %\n-\n31.12.2022\n0.6666\nex 3811 21 00\n80\nAdditives containing :\npolyisobutylene aromatic polyamine succinimide,\nmore than 40 % but not more than 60 % by weight of mineral oils,\nwith a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils\n0 %\n-\n31.12.2022\n0.6668\nex 3811 29 00\n65\nAdditives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils\n0 %\n-\n31.12.2022\n0.5062\nex 3815 90 90\n30\nCatalyst, consisting of a suspension in mineral oil of:\ntetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and\nsilicon dioxide,\ncontaining 6,6 % (± 0,6 %) by weight of magnesium, and\ncontaining 2,3 % (± 0,2 %) by weight of titanium\n0 %\n-\n31.12.2025\n0.2783\nex 3815 90 90\n80\nCatalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol\n0 %\n-\n31.12.2025\n0.6810\nex 3824 99 92\n23\nButylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol\n0 %\n-\n31.12.2025\n0.4909\nex 3824 99 92\n29\nPreparation containing by weight:\n85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and\n1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate\n0 %\n-\n31.12.2025\n0.6779\nex 3824 99 92\n40\nSolution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent\n0 %\n-\n31.12.2025\n0.7742\nex 3824 99 92\n52\nElectrolyte containing:\n5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),\n60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),\n0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),\nfor use in the manufacture of motor vehicle batteries\n3.2 %\n-\n31.12.2021\n0.5050\nex 3824 99 92\n61\n3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine\n0 %\n-\n31.12.2025\n0.6720\nex 3824 99 92\n68\nPreparation containing by weight:\n20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)\nDissolved in:\n10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)\n64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and\n6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)\n0 %\n-\n31.12.2025\n0.6719\nex 3824 99 92\n69\nPreparation containing by weight:\n80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)\n7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and\nnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)\n0 %\n-\n31.12.2021\n0.3069\nex 3824 99 92\n88\n2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)\n0 %\n-\n31.12.2025\n0.4719\nex 3824 99 93\n35\nParaffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)\n0 %\n-\n31.12.2024\n0.7313\nex 3824 99 96\n45\nLithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:\na particle size of less than 10 μm,\na purity by weight of more than 98 %\n3.2 %\n-\n31.12.2021\n0.6628\nex 3824 99 96\n46\nManganese zinc ferrite granulate, containing by weight:\n52 % or more but not more than 76 % of iron(III)oxide,\n13 % or more but not more than 42 % of manganese oxide, and\n2 % or more but not more than 22 % of zinc oxide\n0 %\n-\n31.12.2025\n0.6749\nex 3824 99 96\n48\nZirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %\n0 %\n-\n31.12.2025\n0.6897\nex 3901 40 00\n30\nOctene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:\nmore than 10 % but not more than 20 % by weight of copolymer,\na melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and\na density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,\nfor use in the co-extrusion processing of films for flexible food packaging\n0 %\nm3\n31.12.2025\n0.6920\nex 3901 90 80\n53\nCopolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:\nan acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and\na melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238)\n0 %\nm3\n31.12.2025\n0.6734\nex 3901 90 80\n55\nZinc or sodium salt of an ethylene and acrylic acid copolymer, with:\nan acrylic acid content of 6 % or more but not more than 50 % by weight, and\na melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)\n0 %\n-\n31.12.2025\n0.5049\nex 3901 90 80\n67\nCopolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more\n0 %\n-\n31.12.2025\n0.6736\nex 3903 90 90\n65\nCopolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)\n0 %\n-\n31.12.2025\n0.6804\nex 3903 90 90\n70\nCopolymer in the form of granules containing by weight:\n75 % (± 7 %) styrene and\n25 % (± 7 %) methylmethacrylate\n0 %\nm3\n31.12.2025\n0.4981\nex 3904 69 80\n81\nPoly(vinylidene fluoride) (CAS RN 24937-79-9)\n0 %\n-\n31.12.2025\n0.6672\nex 3906 90 90\n33\nCore shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm\n0 %\n-\n31.12.2025\n0.6663\nex 3906 90 90\n37\nCopolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm\n0 %\n-\n31.12.2025\n0.6891\nex 3907 10 00\n20\nPolyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine\n0 %\n-\n31.12.2022\n0.6839\nex 3907 30 00\n15\nEpoxide resin, halogen-free,\ncontaining by weight more than 2 % phosphorous calculated on the solid content, chemically bound in the epoxide resin,\nnot containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and\ncontaining solvents,\nfor use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits\n0 %\n-\n31.12.2025\n0.6840\nex 3907 30 00\n25\nEpoxide resin\ncontaining by weight 21 % or more of brome,\nnot containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and\ncontaining solvents\n0 %\n-\n31.12.2025\n0.4940\nex 3907 99 80\nex 3913 90 00\n30\n20\nPoly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)\n0 %\n-\n31.12.2025\n0.5057\nex 3907 99 80\n80\nCopolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles\n0 %\n-\n31.12.2025\n0.5032\nex 3909 40 00\n20\nPowder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices\n0 %\n-\n31.12.2025\n0.6921\nex 3910 00 00\n15\nDimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated\n0 %\n-\n31.12.2021\n0.7217\nex 3910 00 00\n45\nDimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8)\n0 %\n-\n31.12.2021\n0.5109\nex 3911 90 99\n35\nAlternated copolymer of ethylene and maleic anhydride (EMA)\n0 %\n-\n31.12.2025\n0.4953\nex 3912 11 00\n40\nCellulose diacetate powder\n0 %\n-\n31.12.2025\n0.6718\nex 3912 39 85\n50\nPolyquaternium 10 (CAS RN 68610-92-4)\n0 %\n-\n31.12.2025\n0.4757\nex 3919 10 80\n37\nPolytetrafluoroethylene film:\nwith a thickness of 100 μm or more,\nan elongation at break of not more than 100 %,\ncoated on one side with a pressure sensitive silicon adhesive\n0 %\n-\n31.12.2025\n0.4761\nex 3919 10 80\nex 3919 90 80\n43\n26\nEthylene vinyl acetate film:\nof a thickness of 100 μm or more,\ncoated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner\n0 %\n-\n31.12.2022\n0.6886\nex 3919 10 80\n63\nReflecting film consisting of\na layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,\na layer of an acrylic resin having embedded glass beads,\na layer of an acrylic resin hardened by a melamine cross-linking agent,\na metal layer,\nan acrylic adhesive, and\na release film\n0 %\n-\n31.12.2025\n0.4947\nex 3919 90 80\n65\nSelf-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner\n0 %\n-\n31.12.2025\n0.4925\nex 3919 90 80\n70\nSelf-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad\n0 %\n-\n31.12.2025\n0.4964\nex 3919 90 80\n82\nReflecting film consisting of:\na polyurethane layer,\na glass microspheres layer,\na metallised aluminium layer, and\nan adhesive, covered on one or both sides with a release liner,\nwhether or not a poly(vinyl chloride) layer,\na layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use\n0 %\n-\n31.12.2025\n0.6640\nex 3920 10 40\n40\nTubular layered film predominately of polyethylene:\nconsisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,\nhaving a total thickness of 55 μm or more,\nhaving a diameter of 500 mm or more but not more than 600 mm\n0 %\n-\n31.12.2025\n0.3357\nex 3920 62 19\n48\nSheets or rolls of poly(ethylene terephthalate):\ncoated on both sides with a layer of epoxy acrylic resin,\nof a total thickness of 37 μm (± 3 μm)\n0 %\n-\n31.12.2025\n0.2589\nex 3920 62 19\n52\nFilm of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D257 method)\n0 %\n-\n31.12.2023\n0.6911\nex 3921 19 00\n40\nTransparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:\na width of 98 mm or more but not more than170 mm,\na thickness of 15 μm or more but not more than 36 μm,\nof a kind used for the manufacture of alkaline battery separators\n3.2 %\n-\n31.12.2021\n0.7263\nex 3921 19 00\n45\nMicroporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:\nzero transversal production direction (TD) shrinkage,\na total thickness of 8 μm or more, but not more than 50 μm,\na width of 15 mm or more, but not more than 900 mm,\na length of more than 200 m, but not more than 8 000 m,\nan average pore size between 0,02 μm and 0,1 μm,\nlaminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,\ncoated or not with surfactant,\ncoated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,\ncoated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm\n3.2 %\n-\n31.12.2021\n0.6742\nex 3921 90 55\n40\nThree layered fabric sheet, in rolls,\ncomprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,\ncoated on both sides with polyamide,\nof a total thickness not more than 135 μm,\nof a total weight not more than 80 g/m2\n0 %\nm2\n31.12.2025\n0.7335\nex 3926 30 00\nex 3926 90 97\n50\n48\nCoated interior or exterior decorative parts consisting of:\na copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and\na PVC foil,\nnot containing layers of copper, nickel or chromium,\nfor use in the manufacturing of parts for motor vehicles of heading 8701 to 8705\n0 %\np/st\n31.12.2022\n0.6717\nex 3926 90 97\n23\nPlastic cover with clips for the exterior rear-view mirror of motor vehicles\n0 %\np/st\n31.12.2025\n0.3850\nex 3926 90 97\n43\nMixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm\n0 %\n-\n31.12.2023\n0.6708\nex 4009 42 00\n20\nRubber brake hose with:\ntextile strings,\na wall thickness of 3,2 mm,\na metal hollow terminal pressed on both ends, and\none or more mounting brackets,\nfor use in the manufacture of goods of Chapter 87\n0 %\n-\n31.12.2025\n0.6844\nex 4016 93 00\n30\nRectangular ethylene-propylene-diene rubber gasket, with:\na length of 72 mm or more but not more than 825 mm,\na width of 18 mm or more but not more than 155 mm,\na peak temperature of 150°C or more but not more than 240 °C,\na permissible material outflow at the place of the mold split of not more than 0,3 mm\n0 %\n-\n31.12.2025\n0.6884\nex 5403 39 00\n10\nBiodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry\n0 %\n-\n31.12.2022\n0.5059\nex 5603 13 10\n20\nNon-woven of spunbonded polyethylene, with a coating,\nof a weight of more than 80 g/m2 but not more than 105 g/m2 and\nan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)\n0 %\nm2\n31.12.2025\n0.5987\nex 5603 14 90\n60\nNon-wovens, consisting of poly(ethylene terephthalate) spun bonded media:\nof weight of 160 g/m2 or more but not more than 300 g/m2,\nnot laminated,\nwith filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M,\npleatable\n0 %\nm2\n31.12.2023\n0.4978\nex 6909 19 00\n20\nSilicon nitride (Si3N4) rollers or balls\n0 %\n-\n31.12.2025\n0.7619\nex 7006 00 90\n40\nPlates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:\na length of 300 mm or more but not more than 1 500 mm,\na width of 300 mm or more but not more than 1 500 mm,\na thickness of 0,5 mm or more but not more than 1,1 mm,\nan indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,\nwith or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,\nwith or without a multi layer anti-reflection-coating on the other side, and\nmachined (chamfered) edges\n0 %\n-\n31.12.2023\n0.6870\nex 7009 10 00\n40\nElectrochromic self-dimming inside rear-view mirror, consisting of:\na mirror support\na plastic casing and\nan integrated circuit\nfor use in the manufacture of motor vehicles of Chapter 87\n0 %\n-\n31.12.2025\n0.5021\nex 7019 19 10\n20\nYarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate\n0 %\n-\n31.12.2025\n0.5020\nex 7019 19 10\n25\nYarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate\n0 %\n-\n31.12.2025\n0.4853\nex 7202 99 80\n10\nFerro-dysprosium, containing by weight:\n78 % or more of dysprosium, and\n18 % or more but not more than 22 % of iron\n0 %\n-\n31.12.2025\n0.7502\nex 7318 24 00\n40\nTube or pipe restraint joint elements:\nof stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,\nproduced by metal injection moulding,\nwith a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/ – 1),\nmeasuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm\n0 %\n-\n31.12.2023\n0.6680\nex 7326 90 98\n40\nIron and steel weights\nwhether or not with parts of other material\nwhether or not with parts of other metals\nwhether or not surface treated\nwhether or not printed\nof a kind used for the production of remote controls\n0 %\n-\n31.12.2025\n0.5029\nex 7604 29 10\nex 7606 12 99\nex 7606 12 99\n10\n21\n25\nSheets and bars of aluminium-lithium alloys\n0 %\n-\n31.12.2022\n0.5487\nex 7607 11 90\nex 7607 11 90\nex 7607 11 90\nex 7607 11 90\nex 7607 11 90\nex 7607 11 90\n48\n49\n51\n52\n53\n56\nAluminium foil in rolls:\nhaving a purity of 99,99 % by weight,\nof a thickness of 0,021 mm or more but not more than 0,2 mm,\nwith a width of 500 mm,\nwith a surface oxide layer by 3 to 4 nm thick,\nand with a cubic texture of more than 95 %\n0 %\n-\n31.12.2021\n0.4050\nex 7607 11 90\n60\nPlain aluminium foil with the following parameters:\nan aluminium content of 99,98 % or more,\na thickness of 0,070 mm or more but not more than 0,125 mm,\nwith a cubic texture,\nof a kind used for high voltage etching\n3.7 %\n-\n31.12.2021\n0.7698\nex 7607 20 90\n10\nAluminium foil, in rolls:\ncoated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,\nwith a width of 200 mm or more, but not more than 400 mm,\nwith a thickness of 0,138 mm or more, but not more than 0,168 mm,\nfor use in the manufacture of lithium-ion battery cell covers\n3.7 %\n-\n31.12.2021\n0.6730\nex 8101 96 00\n10\nTungsten wire containing by weight 99 % or more of tungsten with:\na maximum cross-sectional dimension of not more than 50 μm\na resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre\n0 %\n-\n31.12.2025\n0.5097\nex 8104 30 00\n35\nMagnesium powder\nof purity by weight of more than 99,5 %\nwith a particle size of 0,2 mm or more but not more than 0,8 mm\n0 %\n-\n31.12.2025\n0.4904\nex 8108 90 30\n45\nTitanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967\n0 %\n-\n31.12.2025\n0.6805\nex 8113 00 90\n20\nCuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules\n0 %\n-\n31.12.2025\n0.5024\nex 8301 60 00\nex 8419 90 85\nex 8479 90 70\nex 8481 90 00\nex 8503 00 99\nex 8515 90 80\nex 8537 10 98\nex 8538 90 99\nex 8708 99 10\nex 8708 99 97\n30\n40\n30\n50\n43\n40\n55\n70\n55\n22\nSilicone or plastic keyboards, comprising:\nparts of common metal, and\nwhether or not comprising parts of plastic,\nepoxy resin reinforced with fiberglass or wood,\nwhether or not printed or surface-treated,\nwith or without electrical conductors,\nwith or without a membrane bonded to the keyboard,\nwith or without mono or multilayer protective film\n0 %\np/st\n31.12.2025\n0.4996\nex 8407 90 90\n20\nCompact Liquid Petroleum Gas (LPG) Engine System, with:\n6 cylinders,\nan output of 75 kW or more, but not more than 80 kW,\ninlet and exhaust valves modified to operate continuously in heavy duty applications,\nfor use in the manufacture of vehicles of heading 8427\n0 %\n-\n31.12.2025\n0.6160\nex 8414 30 81\nex 8414 80 73\n60\n30\nHermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:\ndriven by “on-off” single phase alternate current (AC) or “brushless direct current” (BLDC) variable speed motors,\nwith a nominal power rating of not more than 1,5 kW,\na rated voltage of 100 V or more but not more than 240 V,\nwith a height of not more than 300 mm,\nan external diameter of not more than 150 mm,\nwith a unit weight of not more than 15 kg,\nfor use in the manufacture of heat pumps for household appliances, including clothes dryers\n0 %\n-\n31.12.2023\n0.7317\nex 8414 80 22\n20\nAir membrane compressor with:\na flow of 4,5 l/min or more, but not more than 7 l/min,\npower input of not more than 8,1 W, and\na gauge pressure capacity not exceeding 400 hPa (0,4 bar),\nof a kind used in the production of motor vehicle seats\n0 %\n-\n31.12.2022\n0.6842\nex 8415 90 00\n60\nFlame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:\nextruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,\na weight of 0,02 kg or more but not more than 0,25 kg\n0 %\np/st\n31.12.2025\n0.6860\nex 8415 90 00\n65\nAluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:\na length of 143 mm or more but not more than 292 mm,\na diameter of 31 mm or more but not more than 99 mm,\nwith a weight of not less than 0,12 kg and not more than 0,9 kg,\na spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and\na solid particle diameter of not more than 0,06 mm,\nfor use in the manufacture of car air-conditioning systems\n0 %\np/st\n31.12.2022\n0.6821\nex 8436 99 00\n10\nPart containing:\na single-phase AC motor,\nan epicyclic gearing,\na cutter blade,\nand whether or not containing:\na capacitor,\na part fitted with a threaded bolt,\nfor use in the manufacture of garden shredders\n0 %\np/st\n31.12.2025\n0.7380\nex 8481 80 59\n30\nTwo-way flow control valve with housing, with:\nat least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,\nat least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate,\nat least 19, but not more than 300 MPa operating pressure\n0 %\n-\n31.12.2022\n0.7518\nex 8481 90 00\n40\nValve armature:\nfor the opening and closing of the flow of fuel,\nconsisting of a shaft and a blade,\nwith at least 3 but not more than 8 holes on the blade,\nmade of metal and/or metal alloy(s)\n0 %\n-\n31.12.2023\n0.4997\nex 8483 40 90\n80\nTransmission gearbox, with:\nnot more than 3 gears,\nan automatic deceleration system, and\na power reversal system,\nfor use in the manufacture of goods of heading 8427\n0 %\np/st\n31.12.2025\n0.6854\nex 8501 10 10\n20\nSynchronous motor for a dishwasher with a water flow control mechanism with\na length without axle of 24 mm (± 0,3),\na diameter of 49,3 mm (± 0,3),\na rated voltage of 220 V AC or more but not more than 240 V AC,\na rated frequency of 50 Hz or more but not more than 60 Hz,\nan input power of not more than 4 W,\na rotation speed of 4rpm or more but not more than 4,8rpm,\nan output torque of not less than 10kgf/cm\n0 %\n-\n31.12.2022\n0.6858\nex 8501 10 99\n64\nDC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:\nwith Ingress Protection (IP) standard of IP69,\nwith a rotor speed of not more than 6 500 rpm when not loaded,\nwith a rated voltage of 12,0 V (± 0,1),\nof a specified temperature range of – 40 °C or more, but not more than + 165 °C,\nwith or without a connecting pinion,\nwith or without an engine connector,\nwith or without a flange,\nwith a diameter of not more than 40 mm (not including the flange),\nwith an overall height of not more than 90 mm (from the base to the pinion)\n0 %\n-\n30.06.2021\n0.6880\nex 8501 10 99\n65\nElectric turbocharger actuator, with:\na DC motor,\nan integrated gear mechanism,\na (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,\na (pulling) force of 250 N or more in each position of its stroke,\nan effective stroke of 15 mm or more but not more than 25 mm,\nwith or without an on-board diagnostics interface\n0 %\n-\n31.12.2025\n0.6627\nex 8501 10 99\n75\nPermanently excited DC motor with\na multiple-phase winding,\nan external diameter of 28 mm or more but not more than 35 mm,\na rated speed of not more than 12 000 rpm,\na power supply voltage of 8 V or more but not more than 27 V\n0 %\n-\n31.12.2025\n0.4731\nex 8501 31 00\n37\nPermanently excited DC motor with\na multiple-phase winding,\nan external diameter of 30 mm or more but not more than 90 mm, including mounting flange,\na rated speed of not more than 15 000 rpm,\nan output of 45 W or more but not more than 400 W, and\na supply voltage of 9 V or more but not more than 50 V,\nwhether or not with a drive disc,\nwhether or not with a crankcase,\nwhether or not with a fan,\nwhether or not with a cap assembly,\nwhether or not with a sun gear,\nwhether or not with a speed and rotational direction encoder,\nwhether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,\nwhether or not with a mounting flange\n0 %\n-\n31.12.2024\n0.5577\nex 8501 31 00\n50\nDC motors, brushless, with:\nan external diameter of 80 mm or more, but not more than 200 mm,\na supply voltage of 9 V or more, but not more than 16 V,\nan output at 20 °C of 300 W or more, but not more than 750 W,\na torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,\na rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,\nwith or without a pulley,\nwith or without an electronic power steering sensor/controller\n0 %\n-\n31.12.2022\n0.6809\nex 8501 31 00\nex 8501 32 00\n53\n45\nAutomotive-ready, brushless and permanently excited direct current motor with:\na specified speed of not more than 4 100 rpm,\na minimum output of 400 W, but not more than 1,3 kW (at 12 V),\na flange diameter of 85 mm or more, but not more than 200 mm,\na maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,\na housing length of not more than 265 mm, measured from the flange to the outer ending,\n0 %\n-\n31.12.2025\na maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),\na stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and\nsurface magnets,\nwhether or not with electronic power steering controller\n0.6161\nex 8503 00 99\n55\nStator for brushless motor, with:\nan internal diameter of 206,6 mm (± 0,5),\nan external diameter of 265,0 mm (± 0,2), and\na width of 37,2 mm or more but not more than 47,8 mm,\nof a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums\n0 %\np/st\n31.12.2025\n0.7764\nex 8504 31 80\n55\nElectrical transformer with:\na capacity of 0,22 kVA or more, but not more than 0,24 kVA,\nan operating temperature range of + 10°C or more, but not more than + 125°C,\nfour or five inductively coupled copper wire windings,\n11 or 12 connection pins at the bottom, and\ndimensions of not more than 32 mm x 37,8 mm x 25,8 mm\n0 %\n-\n31.12.2024\n0.7788\nex 8505 11 00\n68\nBlocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:\na length of 13,8 mm or more but not more than 45,2 mm,\na width of 7,8 mm or more but not more than 25,2 mm,\na height of 1,3 mm or more but not more than 4,7 mm\n0 %\n-\n31.12.2024\n0.6857\nex 8505 11 00\nex 8505 19 90\n73\n35\nArticles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:\na length of 5 mm or more, but not more than 60 mm,\na width of 5 mm or more, but not more than 40 mm,\na thickness of 3 mm or more, but not more than 15 mm\n0 %\np/st\n31.12.2022\n0.7641\nex 8507 60 00\n13\nPrismatic lithium-ion electric accumulators with:\na width of 173,0 mm (± 0,3 mm),\na thickness of 45,0 mm (± 0,3 mm),\na height 125,0 mm (± 0,3 mm),\na nominal voltage of 3,67 V (± 0,01 V), and\na nominal capacity of 94 Ah and/or 120 Ah,\nfor use in the manufacture of rechargeable electric vehicle batteries\n1.3 %\n-\n31.12.2021\n0.6685\nex 8507 60 00\n15\nCylindrical lithium-ion-accumulators or modules with:\na nominal capacity of 8,8 Ah or more, but not more than 18 Ah,\na nominal voltage of 36 V or more, but not more than 48 V,\na power of 300 Wh or more, but not more than 648 Wh,\nfor use in the manufacture of electric bicycles\n1.3 %\n-\n31.12.2021\n0.6625\nex 8507 60 00\n17\nLithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:\na rated voltage of 12 V,\na length of 350 mm or more but not more than 355 mm,\na width of 170 mm or more but not more than 180 mm,\na height of 180 mm or more but not more than 195 mm,\nweighing 10 kg or more but not more than 15 kg,\na nominal charge of 60 Ah or more, but not more than 80 Ah\n1.3 %\n-\n31.12.2021\n0.7663\nex 8507 60 00\n18\nLithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:\na length of not more than 1 600 mm,\na width of not more than 448 mm,\na height of not more than 395 mm,\na nominal voltage of 280 V or more but not more than 400 V,\na nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,\na charging voltage of 110 V or more but not more than 230 V, and\ncontaining 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,\nfor use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703\n1.3 %\n-\n31.12.2021\n0.7717\nex 8507 60 00\n22\nIntegrated battery system in a metal case with holders, consisting of:\na lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),\nBattery Management System,\na relay,\na low voltage converter (DC/DC),\nat least one connector,\nfor use in the manufacture of hybrid motor vehicles\n1.3 %\n-\n31.12.2021\n0.2907\nex 8507 60 00\n30\nCylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries\n1.3 %\n-\n31.12.2021\n0.6703\nex 8507 60 00\n33\nLithium-ion accumulator, with:\na length of 150 mm or more, but not more than 1 000 mm,\na width of 100 mm or more, but not more than 1 000 mm,\na height of 200 mm or more, but not more than 1 500 mm,\na weight of 75 kg or more, but not more than 200 kg,\na nominal capacity not less than 150Ah and not more than 500 Ah,\na nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)\n1.3 %\n-\n31.12.2021\n0.6702\nex 8507 60 00\n37\nLithium-ion accumulator, with:\na length of 1 200 mm or more, but not more than 2 000 mm,\na width of 800 mm or more, but not more than 1 300 mm,\na height of 2 000 mm or more, but not more than 2 800 mm,\na weight of 1 800 kg or more, but not more than 3 000 kg,\na nominal capacity of 2 800 Ah or more but not more than 7 200 Ah\n1.3 %\n-\n31.12.2021\n0.5548\nex 8507 60 00\n50\nModules for the assembly of batteries of ion lithium electric accumulators with:\na length of 298 mm or more, but not more than 500 mm,\na width of 33,5 mm or more, but not more than 209 mm,\na height of 75 mm or more, but not more than 228 mm,\na weight of 3,6 kg or more, but not more than 17 kg, and\na nominal energy of 458 Wh or more, but not more than 2 158 Wh\n1.3 %\n-\n31.12.2021\n0.5342\nex 8507 60 00\n65\nCylindrical lithium ion cell with\n3,5 VDC to 3,8 VDC,\n300 mAh to 900 mAh, and\na diameter of 10,0 mm to 14,5 mm\n1.3 %\n-\n31.12.2021\n0.7888\nex 8507 60 00\n68\nLithium-ion accumulator in a metal housing, with\na length of 65 mm or more, but not more than 225 mm,\na width of 10 mm or more, but not more than 75 mm,\na height of 60 mm or more, but not more than 285 mm,\na nominal voltage of 2,1 V or more, but not more than 3,8 V, and\na nominal capacity of 2,5 Ah or more, but not more than 325 Ah\n1.3 %\n-\n31.12.2021\n0.5356\nex 8507 60 00\n75\nRectangular lithium-ion-accumulator, with\na metal casing,\na length of 173 mm (± 0,15 mm),\na width of 21 mm (± 0,1 mm),\na height of 91 mm (± 0,15 mm),\na nominal voltage of 3,3 V, and\na nominal capacity of 21 Ah or more\n1.3 %\n-\n31.12.2021\n0.6753\nex 8507 60 00\n77\nLithium-ion rechargeable batteries, with:\na length of 700 mm or more, but not more than 2 820 mm,\na width of 935 mm or more, but not more than 1 660 mm,\na height of 85 mm or more, but not more than 700 mm,\na weight of 250 kg or more, but not more than 700 kg,\na power of not more than 175 kWh,\na nominal voltage of 400 V\n1.3 %\n-\n31.12.2021\n0.5014\nex 8508 70 00\nex 8537 10 98\n20\n98\nElectronic circuit cards that:\nare connected by wire or radio frequency to each other and the motor controller card, and\nregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,\nwhether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)\n0 %\np/st\n31.12.2025\n0.6856\nex 8512 20 00\n30\nLighting module, containing at least:\ntwo LEDs,\nglass or plastic lenses, focusing/scattering the light emitted by the LEDs,\nreflectors redirecting the light emitted by the LEDs,\nin an aluminium housing with a radiator, mounted at a bracket with an actuator\n0 %\np/st\n31.12.2025\n0.6863\nex 8512 30 90\n20\nWarning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:\na printed circuit board,\na connector,\nwhether or not a metal holder,\nfor use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2022\n0.6689\nex 8529 90 65\n28\nElectronic assembly comprising at least:\na printed circuit board with,\none or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,\nflash memory,\noperating memory,\nwith or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,\nsockets and plugs for connecting a LCD-display, a LED lighting and a control panel\n0 %\np/st\n31.12.2025\n0.4893\nex 8529 90 65\nex 8529 90 92\n65\n53\nPrinted circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module\n0 %\np/st\n31.12.2025\n0.4890\nex 8529 90 92\n25\nLCD modules, not combined with touch screen facilities, solely consisting of:\none or more TFT glass or plastic cells,\na die cast heat sink,\na backlight unit,\none printed circuit board with micro controller, and\nLVDS (Low Voltage Differential Signalling) interface,\nfor use in the manufacture of radios for motor vehicles\n0 %\np/st\n31.12.2025\n0.6654\nex 8529 90 92\n37\nFastening and covering ledges of aluminium alloy containing:\nsilicon and magnesium,\nwith a length of 300 mm or more but not more than 2 200 mm,\nspecifically shaped for use in the manufacture of TV sets\n0 %\n-\n31.12.2025\n0.6629\nex 8529 90 92\n63\nLCD module\nwith a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,\nwith or without a touch screen,\nwith an LED backlight,\nwith a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,\nwith a plug for power supply and CAN and LVDS interfaces,\nwith or without electronic components for dynamic adjustments of colour,\nin a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,\nsuitable for installation in motor vehicles of Chapter 87\n0 %\np/st\n31.12.2025\n0.5018\nex 8529 90 92\n67\nColour LCD display panel for LCD monitors of heading 8528:\nwith a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,\nwith or without a touch screen,\nwith backlight, micro-controller,\nwith a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,\nin a housing with or without a heat sink at the back of the housing,\nwithout a signal-processing module,\nwhether or not with haptic and acoustical feedback,\nfor use in the manufacture of vehicles of Chapter 87\n0 %\np/st\n31.12.2025\n0.6781\nex 8529 90 92\n85\nColour LCD module in a housing:\nwith a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,\nwithout touch screen,\nwith a backlight and micro-controller,\nwith a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,\nwithout a signal processing module,\nwith control electronics for pixel addressing only,\nwith a motorised mechanism for moving the display screen,\nfor permanent installation in vehicles of Chapter 87\n0 %\np/st\n31.12.2025\n0.6849\nex 8536 69 90\n60\nElectrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors\n0 %\np/st\n31.12.2022\n0.5028\nex 8536 69 90\n84\nUniversal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528\n0 %\np/st\n31.12.2025\n0.6864\nex 8537 10 91\n50\nFuse control module in a plastic housing with mounting brackets comprising:\nsockets with or without fuses,\nconnecting ports,\na printed circuit board with embedded microprocessor, micro switch and relay,\nof a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2025\n0.6889\nex 8537 10 98\n35\nElectronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:\n2 rotary knobs\n27 or more pushbuttons\nLED lights\n2 integrated circuits for receiving and sending of control signals via the LIN-bus\n0 %\np/st\n31.12.2025\n0.6866\nex 8538 90 91\nex 8538 90 99\n20\n50\nInterior antenna for a car door locking system, comprising:\nan antenna module in a plastic housing,\na connection cable with a plug,\nat least two mounting brackets,\nwhether or not PCB including integrated circuits, diodes and transistors,\nfor use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2025\n0.6710\nex 8544 30 00\nex 8544 42 90\n60\n50\nFour-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87\n0 %\n-\n31.12.2025\n0.6867\nex 8544 30 00\n85\nExtension two-core cable with two connectors, containing at least:\na rubber grommet,\na metal attachment bracket,\nof a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87\n0 %\np/st\n31.12.2025\n0.6853\nex 8544 42 90\n70\nElectric conductors:\nof a voltage of not more than 80 V,\nwith a length of not more than 120 cm,\nfitted with connectors,\nfor use in the manufacture of hearing aids, accessory kits and speech processors\n0 %\np/st\n31.12.2025\n0.6861\nex 8544 49 93\n30\nElectric conductors:\nof a voltage of not more than 80 V,\nof a platinum-iridium-alloy,\ncoated with poly(tetrafluoroethylene),\nwithout connectors,\nfor use in the manufacture of hearing aids, implants and speech processors\n0 %\nm\n31.12.2025\n0.5002\nex 8545 90 90\n40\nCorrosion resistant, layered technical fibre substrate of a gas diffuser layer with:\ncontrolled fibre length, flex strength, porosity, thermal conductance, electrical resistance,\na thickness of less than 600 μm,\na weight of less than 500 g/m2\n0 %\nm2\n31.12.2021\n0.6707\nex 8708 30 10\nex 8708 30 91\n70\n40\nDuctile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2025\n0.6869\nex 8708 40 20\nex 8708 40 50\n20\n10\nAutomatic hydrodynamic gearbox\nwith a hydraulic torque converter,\nwithout transfer box and cardan shaft,\nwhether or not with front differential,\nfor use in the manufacture of motor vehicles of Chapter 87\n0 %\np/st\n31.12.2025\n0.6648\nex 8708 50 20\nex 8708 50 99\n20\n10\nTransmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle\nof a length of 1 m or more but not more than 2 m,\nof a weight of 6 kg or more but not more than 9 kg\n0 %\np/st\n31.12.2025\n0.6711\nex 8708 80 20\nex 8708 80 35\n10\n10\nUpper strut insulator containing:\na metal holder with three mounting screws, and\na rubber bump,\nfor use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2025\n0.6859\nex 8708 91 20\nex 8708 91 99\n30\n30\nAluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:\nan insulating area flatness of not more than 0,1 mm,\na permissible particle quantity of 0,3 mg per tank,\na distance between pores of 2 mm or more,\npore sizes of not more than 0,4 mm, and\nnot more than 3 pores larger than 0,2 mm,\nof a kind used in heat exchangers for car cooling systems\n0 %\np/st\n31.12.2025\n0.7716\nex 8708 91 35\n20\nTurbocharger cooling duct containing:\nan aluminium alloy duct with at least one metal holder and at least two mounting holes,\na rubber pipe with clips,\na stainless steel flange highly resistant to corrosion [SUS430JIL],\nfor use in the manufacture of compression ignition engines of motor vehicles\n0 %\n-\n31.12.2024\n0.6687\nex 8708 95 10\nex 8708 95 99\n10\n20\nInflatable safety cushion of high strength polyamide fibre:\nsewn,\nfolded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming\n0 %\np/st\n31.12.2025\n0.6688\nex 8708 95 10\nex 8708 95 99\n20\n30\nInflatable safety cushion of high strength polyamide fibre:\nsewn,\nfolded,\nwith three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,\nsuitable for cool inflator technology\n0 %\np/st\n31.12.2025\n0.7581\nex 8708 50 20\nex 8708 50 99\n60\n15\nCar transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:\nat least an actuator,\nwhether or not an interior distribution by chain\n0 %\n-\n31.12.2024\n0.6686\nex 8714 10 90\n10\nMotorcycle fork rod inner tubes:\nof SAE1541 carbon steel,\nwith a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),\nhaving a wall thickness of 1,3 mm or more, but not more than 1,6 mm,\nhaving an elongation at break of 15 %,\nperforated\n0 %\np/st\n31.12.2025\n0.6848\nex 8714 10 90\n70\nMotor bikes radiators in consignment of 100 pieces or more\n0 %\np/st\n31.12.2022\n0.6879\nex 8714 96 10\n10\nPedals, for use in the manufacture of bicycles (including electric bicycles)\n0 %\n-\n31.12.2025\n0.6878\nex 8714 99 90\n30\nSeat posts, for use in the manufacture of bicycles (including electric bicycles)\n0 %\np/st\n31.12.2025\n0.4883\nex 9001 90 00\n85\nLight guide panel made of poly(methyl methacrylate):\nwhether or not cut,\nwhether or not printed,\nfor use in the manufacture of backlight units for flat screen TVs\n0 %\n-\n31.12.2025\n0.7590\nex 9002 11 00\n18\nLens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:\na horizontal field of view range to a maximum of 120 deg,\na diagonal field of view range to a maximum of 92 deg,\na focal length to a maximum of 7,50 mm,\na relative aperture of a maximum of F/2,90,\na maximum diameter of 22 mm\n0 %\n-\n31.12.2023\n0.5692\nex 9002 11 00\n20\nLenses:\nmeasuring not more than 95 mm × 55 mm × 50 mm,\nwith a resolution of 160 lines/mm or better, and\nwith a zoom ratio of 3 or more times\n0 %\n-\n31.12.2022\n0.5025\nex 9401 90 80\n10\nRatchet disk for use in the manufacture of reclining car seats\n0 %\np/st\n31.12.2025\n0.4846\nex 9503 00 75\nex 9503 00 95\n10\n10\nPlastic cable car scale models, whether or not with a motor, for printing\n0 %\np/st\n31.12.2025\n0.6950\nex 9607 20 10\n10\nSliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers\n0 %\n-\n31.12.2022\n0.6949\nex 9607 20 90\n10\nNarrow strips mounted with plastic chain scoops for use in the manufacture of zippers\n0 %\n-\n31.12.2025\n(3) the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:\nSuspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).’.\nSerial Number\nCN code\nTARIC\nDescription\nRate of autonomous duty\nSupplementary Unit\nDate foreseen for mandatory review\n‘0.8021\n2804 70 10\nRed phosphorus\n0 %\n-\n31.12.2022\n0.8022\n2804 70 90\nPhosphorus, other than red phosphorus\n0 %\n-\n31.12.2023\n0.7974\nex 2903 39 19\n40\n3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2025\n0.8017\nex 2903 99 80\n25\n2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.8018\nex 2903 99 80\n35\n2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.7957\nex 2904 99 00\n55\n2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more\n0 %\n-\n31.12.2025\n0.7963\nex 2906 29 00\n70\n1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.8015\nex 2914 29 00\n35\n4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.7955\nex 2915 24 00\n10\nAcetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.7980\nex 2916 19 95\n60\nMethyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)\n0 %\n-\n31.12.2025\n0.7940\nex 2916 19 95\n70\nMethyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more\n0 %\n-\n31.12.2025\n0.7931\nex 2916 20 00\n25\nCyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2025\n0.7933\nex 2916 20 00\n35\n2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.7929\nex 2916 39 90\n16\n3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.8008\nex 2918 29 00\n40\n3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %\n0 %\n-\n31.12.2025\n0.7934\nex 2918 99 90\n43\nVanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more\n0 %\n-\n31.12.2025\n0.7947\nex 2921 29 00\n70\nN,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2025\n0.8019\nex 2921 49 00\n45\n2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.8020\nex 2921 49 00\n55\n2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.7946\nex 2922 19 00\n29\nN-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2025\n0.7935\nex 2922 19 00\n70\n2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.8000\nex 2924 19 00\n18\n2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.8013\nex 2925 19 95\n40\nN-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more\n0 %\n-\n31.12.2025\n0.7985\nex 2930 90 98\n88\n1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more\n0 %\n-\n31.12.2025\n0.7951\nex 2931 90 00\n25\nN-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.7958\nex 2932 20 90\n18\n4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.7984\nex 2932 20 90\n23\n1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more\n0 %\n-\n31.12.2025\n0.7978\nex 2932 99 00\n68\n3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.7930\nex 2932 99 00\n73\n5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.7936\nex 2932 99 00\n78\nMethyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.7954\nex 2932 99 00\n83\n6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.7938\nex 2933 19 90\n43\ntert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.7937\nex 2933 29 90\n23\n1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.7976\nex 2933 39 99\n83\n2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.7925\nex 2933 39 99\n84\nDiethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.7981\nex 2933 39 99\n86\n3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.7939\nex 2933 39 99\n87\n6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.7986\nex 2933 39 99\n88\nBenzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more\n0 %\n-\n31.12.2025\n0.7952\nex 2933 69 80\n33\n2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2025\n0.7927\nex 2933 99 80\n60\n2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2025\n0.7971\nex 2933 99 80\n70\n5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.8014\nex 2933 99 80\n80\nPyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2025\n0.7926\nex 2934 99 90\n65\nBenzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2025\n0.7944\nex 2934 99 90\n70\n1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2025\n0.7928\nex 2935 90 90\n44\n4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more\n0 %\n-\n31.12.2025\n0.7943\nex 3201 90 20\n10\nRhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less\n0 %\n-\n31.12.2025\n0.7975\nex 3801 10 00\n10\nArtificial graphite in powder form, (CAS RN 7782-42-5) with:\na secondary particle structure which is aggregated from smaller primary particles,\nwithout coating on the surface,\nparticle size represented by d50 value of 13,5 μm (± 0,5),\nspecific surface area (measured by BET) less than 2,0 m2/g,\ntap density: 1,10 ~ 1,70 g/cm3,\nspecific Discharge Capacity of 351,0 mAh/g (± 3,0),\ninitial efficiency of 94,0 % (± 1,0)\n1.8 %\n-\n31.12.2021\n0.7994\nex 3801 10 00\n20\nArtificial graphite (CAS RN 7782-42-5) powder form, with:\nspecific surface area (measured by BET) of 0,8 m2/g (± 0,25),\ntap density: 0,85 g/cm3 (± 0,10),\nparticle size represented by d50 value of 21,0 μm (± 2,0),\nspecific discharge capacity of 351,0 mAh/g (± 3,0),\ninitial efficiency of 94,0 % (± 2,0)\n1.8 %\n-\n31.12.2021\n0.7998\nex 3815 90 90\n38\nPhotoinitiator, containing by weight:\n80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),\nnot more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate\n0 %\n-\n31.12.2025\n0.7999\nex 3815 90 90\n48\nPhotoinitiator containing by weight:\n88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),\nnot more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)\n0 %\n-\n31.12.2025\n0.7950\nex 3902 90 90\n65\nBrominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39\n0 %\n-\n31.12.2025\n0.7953\nex 3910 00 00\n65\nLiquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)\n0 %\n-\n31.12.2025\n0.8009\nex 3911 90 99\n38\nMixture containing by weight:\n90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and\n10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)\n0 %\n-\n31.12.2025\n0.8010\nex 3911 90 99\n48\nMixture containing by weight:\n90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and\n10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)\n0 %\n-\n31.12.2025\n0.7949\nex 3920 61 00\n40\nExtruded thermoplastic foils or films of polycarbonate with:\nmatt surface texture on both sides,\na thickness of more than 50 μm but not more than 200 μm,\na width of 800 mm or more, but not more than 1 500 mm, and\na length of 915 m or more, but not more 2 500 m,\nfor use in the production of retroreflective products\n0 %\n-\n31.12.2025\n0.8011\nex 3920 62 19\nex 3920 62 90\n68\n20\nPoly(ethylene terephthalate) film in rolls:\nwith a thickness of 50 μm or more but not more than 350 μm, and\ncovered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm\n0 %\n-\n31.12.2025\n0.8005\nex 3920 99 28\n48\nThermoplastic polyurethane foil in rolls, with:\na width of 900 mm or more but not more than 1 016 mm,\na matt finish,\na thickness of 0,4 mm (± 8 %),\nan elongation at break of 480 % or more (ASTM D412 (Die C)),\na tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),\na Shore A hardness of 90 (± 3) (ASTM D2240),\na tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),\na melting point of 165°C (± 10 °C)\n0 %\n-\n31.12.2025\n0.8024\nex 5603 14 10\n20\nNon-wovens, consisting of poly(ethylene terephthalate) spun bonded media:\nof weight of 160 g/m2 or more but not more than 300 g/m2\nlaminated on one side with a membrane or a membrane and aluminium\nwith filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M\npleatable\n0 %\nm2\n31.12.2023\n0.8028\nex 6909 19 00\n40\nCeramic-carbon absorption cartridges with the following characteristics:\nextruded fired ceramic bound multicellular cylindrical structure,\n10 % or more by weight but not more than 35 % by weight of activated carbon,\n65 % or more by weight but not more than 90 % by weight of ceramic binder,\nwith a diameter of 29 mm or more but not more than 41 mm,\na length of not more than 150 mm,\nfired at temperature of 800 °C or more, and\nfor vapours adsorption,\nof a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles\n0 %\np/st\n31.12.2025\n0.7913\nex 7506 20 00\n20\nSheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:\na thickness of 0,5 mm or more but not more than 3 mm,\na width of 250 mm or more but not more than 1 219 mm\n0 %\n-\n31.12.2025\n0.7997\nex 7616 99 90\n35\nAluminium plate with:\na length of 36 mm or more but not more than 49 mm,\na width of 29,8 mm or more but not more than 45,2 mm,\na thickness of 0,18 mm or more but not more than 0,66 mm,\nequipped with a polypropylene tape with:\na length of 6,5 mm or more but not more than 16,5 mm,\na width of 39 mm or more but not more than 56 mm,\ncharacteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,\nresistance to influence of electrolyte,\nfor use in the manufacture of lithium-ion battery cells for motor vehicle batteries\n3 %\n-\n31.12.2021\n0.7966\nex 8104 19 00\n10\nUnwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium\n0 %\n-\n31.12.2025\n0.7942\nex 8108 90 30\n35\nBars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm\n0 %\n-\n31.12.2025\n0.8012\nex 8406 82 00\n10\nIndustrial steam turbine with:\nan output of 5 MW or more but not more than 40 MW,\ndesigned for a pressure of not more than 140 bar and a temperature of not more than 540 °C,\nequipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar\n0 %\n-\n31.12.2025\n0.7961\nex 8409 91 00\nex 8481 90 00\n55\n60\nNozzle body for the regulation of angle and distribution of fuel injection:\nof a cylindrical shape,\nmade of stainless steel,\nwith 4 or more, but not more than 16 holes,\nwith a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute\n0 %\n-\n31.12.2025\n0.7965\nex 8409 91 00\n75\nHousing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:\nan inlet diameter of 2 mm or more, but not more than 10 mm,\nan outlet diameter of 2 mm or more, but not more than 10 mm,\nan electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,\na plastic covering moulded around a stainless steel tube\n0 %\n-\n31.12.2025\n0.7967\nex 8409 91 00\nex 8481 90 00\n80\n70\nNozzle needle for opening and closing the flow of fuel in the engine, with:\n2 holes,\n4 grooves,\na diameter of 3 mm or more, but not more than 6 mm,\na length of 25 mm or more, but not more than 35 mm,\nmade of stainless steel with hard-chrome plating\n0 %\n-\n31.12.2025\n0.7969\nex 8413 30 20\n40\nHigh-pressure plunger pump for direct diesel injection, with:\nan operating pressure of not more than 275 MPa,\na camshaft,\na fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute,\nan electric pressure regulating valve\n0 %\n-\n31.12.2025\n0.7970\nex 8413 30 20\n50\nHigh-pressure plunger pump for direct diesel injection:\nwith an operating pressure of not more than 275 MPa,\ndesigned to contact the crankshaft,\nwith an electromagnetic valve\n0 %\n-\n31.12.2025\n0.7996\nex 8418 99 90\n20\nAluminium connecting block for connecting to a condenser manifold in welding process:\nhardened to T6 or T5 temper,\nwith a weight of not more than 150 g,\nwith a length of 20 mm or more but not more than 150 mm,\nwith a fixing rail in one piece\n0 %\n-\n31.12.2025\n0.8004\nex 8418 99 90\n30\nReceiver dryer profile for connecting to a condenser manifold in welding process with:\na braze flatness of not more than 0,2 mm,\na weight of 100 g or more but not more than 600 g,\na fixing rail in one piece\n0 %\n-\n31.12.2025\n0.7979\nex 8479 89 97\n55\nIntegrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode\n0.8 %\n-\n31.12.2021\n0.7982\nex 8479 89 97\n65\nIntegrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line\n0.8 %\n-\n31.12.2021\n0.7964\nex 8479 90 70\n40\nHousing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:\nof a circular shape,\nmade of steel alloy with sintering process,\nwith not more than 8 oil chambers,\nwith a Rockwell hardness of 55 or more,\nwith a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3\n0 %\n-\n31.12.2025\n0.7968\nex 8481 30 91\nex 8481 30 99\n30\n50\nMechanical check (non-return) valve for opening and closing of the flow of fuel:\nwith an operating pressure of not more than 250 MPa,\nwith a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,\nwith 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,\nmade of steel\n0 %\n-\n31.12.2025\n0.7960\nex 8481 80 59\nex 8481 90 00\n70\n80\nFlow-control valve\nmade of steel,\nwith an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,\nwith an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm\n0 %\n-\n31.12.2025\n0.7972\nex 8527 29 00\nex 8529 90 65\n10\n38\nSatellite radio receiver module:\nwith a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm,\ncomprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,\nbeing able to process radio frequency signals,\nwith a medium frequency unit,\nfor use in the manufacture of products falling under heading 8527\n0 %\n-\n31.12.2025\n0.7987\nex 8708 50 20\nex 8708 50 55\n15\n50\nSpherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened\n0 %\n-\n31.12.2025\n0.7988\nex 8708 50 20\nex 8708 50 99\n25\n45\nBall-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:\n6 ball tracks or more but not more than 8, with\na thread,\nan external involute spline with 21 or more but not more than 38 teeth,\nfor running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,\nforged, turned, milled and hardened\n0 %\n-\n31.12.2025\n0.7989\nex 8708 50 20\nex 8708 50 99\n35\n50\nInboard constant velocity joint tripod housing, with:\nan outer diameter of 67,0 mm or more but not more than 99,0 mm,\n3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,\nan external spline with 21 teeth or more but not more than 41,\nforged, turned, rolled and hardened\n0 %\n-\n31.12.2025\n0.7990\nex 8708 50 20\nex 8708 50 99\n45\n55\nOutboard constant velocity joint inner race, part of the vehicle’s drive system, with:\n6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,\nforged, turned, milled, broached and hardened\n0 %\n-\n31.12.2025\n0.7991\nex 8708 50 20\nex 8708 50 99\n55\n60\nInboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:\n3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,\nforged, turned, broached and hardened\n0 %\n-\n31.12.2025\n0.7973\nex 9002 11 00\n23\nLenses with:\nmotorized focus, zoom, aperture,\nelectronically switchable infrared cut filter,\nan adjustable focal length not less than 2,7 mm and not more than 55 mm,\na weight of not more than 100 g,\na length of less than 70 mm,\na diameter of not more than 60 mm\n0 %\n-\n31.12.2025",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Only the ad valorem duty is suspended. The specific duty shall continue to apply.’;"
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).’."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2020/2231/annex",
    "retrieved_at": "2026-11-01T14:42:10.225026+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}