{
  "url": "https://openlegislation.uk/eu-regulation-2020-239/annex/division-1",
  "json_url": "https://openlegislation.uk/eu-regulation-2020-239/annex/division-1.json",
  "legislation": "eur/2020/239",
  "legislation_title": "Commission Implementing Regulation (EU) 2020/239 of 20 February 2020 amending Implementing Regulation (EU) No 901/2014 with regard to the adaptation of the templates for type-approval procedures for two- or three-wheel vehicles and quadricycles to the environmental steps Euro 5 and Euro 5+ requirements (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2020-239",
  "path": "annex/division/1",
  "kind": "division",
  "number": "(1)",
  "heading": "Annex I is amended as follows:",
  "text": "(a) Part B is amended as follows:\n(i) in point 1, the following point 1.4 is added:\n1.4. ‘Vehicles and Vehicle types shall be identified as compliant with environmental step Euro 5 or environmental step Euro 5+ in accordance with the following Table:\nIdentification of environmental step Euro 5 and Euro 5+ for L-category vehicles\n(sub-) category\nObligatory as of:1.1.2020 for new types of vehicles1.1.2021 for existing types of vehicles\nEnvi. step\nObligatory as of:1.1.2024 for new types of vehicles1.1.2025 for existing types of vehicles\nEnvi. step\nL1e\nOBD system not required\nEuro 5\nOBD system not required\nEuro 5\ntest types I, IV & V: Euro 5\ntest types I, IV & V: Euro 5\nL2e (other than L2e-U)\nOBD system not required\nEuro 5\nOBD system not required\nEuro 5\ntest types I, IV & V: Euro 5\ntest types I, IV & V: Euro 5\nL2e-U\nOBD system not required\nEuro 5\nOBD system not required\nEuro 5+\ntest type I: Euro 4\ntest type I: Euro 5\ntest type IV & V: Euro 5\ntest types IV & V: Euro 5\nL3e (other than enduro and trial), L4e, L5e-A and L7e-A\nOBD stage I system that monitors electric circuit and electronics failure, and triggers a report when:\nEuro 5\nOBD stage I system that monitors electric circuit and electronics failure, and triggers a report when:\nEuro 5+\n(a) OBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded, and\n(a) OBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded, and\n(b) any operating mode significantly reduces engine torque.\n(b) any operating mode significantly reduces engine torque.\nOBD stage II that monitors emission control system failures and degradation (with the exception of catalyst monitoring), and reports when:\nOBD stage II that monitors emission control system failures and degradation, and reports when:\nOBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded.\nOBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded.\ntest types I, IV & V: Euro 5\ntest types I, IV & V: Euro 5\nEnduro L3e-AxE and Trial L3e-AxT\nOBD stage I system that monitors electric circuit and electronics failure, and triggers a report when:\nEuro 5\nOBD stage I system that monitors electric circuit and electronics failure, and triggers a report when:\nEuro 5+\n(a) OBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded, and\n(a) OBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded, and\n(b) any operating mode significantly reduces engine torque.\n(b) any operating mode significantly reduces engine torque.\ntest type I: Euro 4\ntest type I: Euro 5\ntest types IV & V: Euro 5\ntest types IV & V: Euro 5\nL5e (other than Le5-A) and L7e (other than L7e-A)\nOBD stage I system that monitors electric circuit and electronics failure, and triggers a report when:\nEuro 5\nOBD stage I system that monitors electric circuit and electronics failure, and triggers a report when:\nEuro 5+\n(a) OBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded, and\n(a) OBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded, and\n(b) any operating mode significantly reduces engine torque.\n(b) any operating mode significantly reduces engine torque.\ntest types I, IV & V: Euro 5\ntest types I, IV & V: Euro 5\nL6e other than L6e-B\nOBD system not required\nEuro 5\nOBD system not required\nEuro 5\ntest types I, IV & V: Euro 5\ntest types I, IV & V: Euro 5\nL6e-B\nOBD system not required\nEuro 5\nOBD system not required\nEuro 5+\ntest type I: Euro 4\ntest type I: Euro 5\ntest type IV & V: Euro 5\ntest type IV & V: Euro 5\n’;\n(ii) point 2.8 is amended as follows:\ninformation document data entry 4.0.1 is replaced by the following:\n‘\n4.0.1.\nL1e – L7e\nEnvironmental step: Euro (3/4/5/5+) (4)\n’\nthe following information document data entry 7.6.3.5 is inserted after information document data entry 7.6.3.4:\n‘7.6.3.5.\nL3e – L7e(10)\nDescription of the default modes which a driver may experience in case of an ETC failure’\n(b) in Appendix 3, information document data entry 4.0.1 is replaced by the following:\n‘\n4.0.1.\nL1e – L7e\nEnvironmental step: Euro (3/4/5/5+) (4)\n’\n(c) in Appendix 6, information document data entry 4.0.1 is replaced by the following:\n‘\n4.0.1.\nL1e – L7e\nEnvironmental step: Euro (3/4/5/5+) (4)\n’\n(d) in Appendix 7, information document data entry 4.0.1 is replaced by the following:\n‘\n4.0.1.\nL1e – L7e\nEnvironmental step: Euro (3/4/5/5+) (4)\n’\n(e) in Appendix 8, information document data entry 4.0.1 is replaced by the following:\n‘\n4.0.1.\nL1e – L7e\nEnvironmental step: Euro (3/4/5/5+) (4)\n’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2020/239/annex/division/1",
    "retrieved_at": "2026-11-01T14:42:49.530585+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}