{
  "url": "https://openlegislation.uk/eu-regulation-2020-874/annex",
  "json_url": "https://openlegislation.uk/eu-regulation-2020-874/annex.json",
  "legislation": "eur/2020/874",
  "legislation_title": "Council Regulation (EU) 2020/874 of 15 June 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2020-874",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "The Annex to Regulation (EU) No 1387/2013 is amended as follows:\n(1) all asterisks (*) and the related endnote containing the text ‘A newly introduced measure or a measure with amended conditions. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure.’ are deleted;\n(2) the entries with the serial numbers 0.2706, 0.2972, 0.3650, 0.3886, 0.3894, 0.3895, 0.4004, 0.4039, 0.4177, 0.4647, 0.4648, 0.4751, 0.5504, 0.5615, 0.5929, 0.6601, 0.6745, 0.7784 and 0.7803 are deleted;\n(3) the following entries replace those entries that have the same serial numbers:\nSuspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).;\nSerial number\nCN code\nTARIC\nDescription\nRate of autonomous duty\nSupplementary Unit\nDate foreseen for mandatory review\n‘0.7288\nex 2841 50 00\n11\nPotassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more\n2 %\n-\n31.12.2021\n0.3419\nex 2850 00 20\n80\nArsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more\n0 %\n-\n31.12.2024\n0.2583\nex 2903 89 80\n45\n1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16 , 9.02 , 13.05 ,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more\n2 %\n-\n31.12.2021\n0.2942\nex 2919 90 00\n35\n2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100 μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique\n0 %\n-\n31.12.2023\n0.5037\nex 2922 49 85\n17\nGlycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)\n0 %\n-\n31.12.2020\n0.3689\nex 2924 19 00\n23\nAcrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more\n2 %\n-\n31.12.2021\n0.6259\nex 2926 90 70\n26\nCyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products\n0 %\n-\n31.12.2024\n0.2656\nex 2931 39 90\n38\nN-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more\n0 %\n-\n31.12.2024\n0.7811\nex 2933 19 90\n33\nFipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine\n0 %\n-\n31.12.2024\n0.4346\nex 2934 20 80\n25\n1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one\n0 %\n-\n31.12.2022\n0.5134\nex 3204 11 00\n45\nPreparation of dispersion dyes, containing:\nC.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),\nC.I. Disperse Blue 291:1 (CAS RN 872142-01-3),\nC.I. Disperse Violet 93:1 (CAS RN 122463-28-9),\nwhether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)\n0 %\n-\n31.12.2020\n0.7318\nex 3603 00 60\n10\nIgniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 29,4 mm and a pin length of 6,68 mm (±0,3 mm) or more but not more than 7,54 mm (±0,3 mm)\n0 %\n-\n31.12.2022\n0.5718\nex 3811 21 00\n85\nAdditives:\ncontaining more than 20 % or more but not more than 45 % by weight of mineral oils,\nbased on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,\nfor use in the manufacture of blends of additives\n0 %\n-\n31.12.2022\n0.7512\nex 3811 29 00\n18\nAdditives consisting of dihydroxy butanedioic acid – (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils\n0 %\n-\n31.12.2023\n0.3069\nex 3824 99 92\n88\n2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)\n0 %\n-\n31.12.2020\n0.4719\nex 3824 99 93\n35\nParaffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)\n0 %\n-\n31.12.2024\n0.6953\nex 3901 40 00\n20\nOctene linear low-density polyethylene (LLDPE) in the form of pellets with:\n10 % or more but not more than 20 % by weight of octene,\na melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),\na melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,\na density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,\na gel area per 24,6 cm3 of not more than 20 mm2, and\nan anti-oxidant level of not more than 240 ppm\n0 %\nm3\n31.12.2020\n0.5161\nex 3919 10 80\nex 3919 90 80\n70\n75\nRolls of polyethylene foil:\nself-adhesive on one side,\nof a total thickness of 0,025 mm or more, but not more than 0,09 mm,\nof a total width of 60 mm or more, but not more than 1 110 mm,\nfor use in the manufacture of products of Headings 8521 or 8528 for protection purposes\n0 %\n-\n31.12.2021\n0.4947\nex 3919 90 80\n65\nSelf-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner\n0 %\n-\n31.12.2024\n0.3241\nex 3920 10 25\n30\nMono-layered high-density polyethylene film:\ncontaining by weight 99 % or more of polyethylene,\nwith a thickness of 12 μm or more but not more than 20 μm,\nwith a length of 4 000 m or more but not more than 7 000 m,\nwith a width of 600 mm or more but not more than 900 mm\n0 %\n-\n31.12.2023\n0.3312\nex 3921 90 60\n35\nIon-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells\n0 %\n-\n31.12.2023\n0.6708\nex 4009 42 00\n20\nRubber brake hose with:\ntextile strings,\na wall thickness of 3,2 mm,\na metal hollow terminal pressed on both ends, and\none or more mounting brackets,\nfor use in the manufacture of goods of Chapter 87\n0 %\n-\n31.12.2024\n0.7372\nex 5311 00 90\n10\nPlain-woven fabric of paper yarns glued on a tissue paper layer:\nwith a weight of 190 g/m2 or more but not more than 280 g/m2, and\ncut into rectangles with a side length of 40 cm or more but not more than 140 cm\n0 %\n-\n31.12.2022\n0.2546\nex 6903 90 90\n30\nSilicon carbide reactor tubes and holders having a softening point of 1 400 °C or higher\n0 %\n-\n31.12.2023\n0.7619\nex 7006 00 90\n40\nPlates of sodalime glass of STN (Super Twisted Nematic) quality having:\na length of 300 mm or more but not more than 1 500 mm,\na width of 300 mm or more but not more than 1 500 mm,\na thickness of 0,5 mm or more but not more than 1,1 mm,\nan indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,\nwith or without a multilayer anti-reflection-coating on the other side and machined (chamfered) edges\n0 %\n-\n31.12.2023\n0.7341\nex 7413 00 00\n20\nLoudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed\n0 %\n-\n31.12.2022\n0.3928\nex 7616 99 90\n15\nHoneycomb aluminium blocks for use in the manufacture of aircraft parts\n0 %\np/st\n31.12.2023\n0.6730\nex 8101 96 00\n10\nTungsten wire containing by weight 99 % or more of tungsten with:\na maximum cross-sectional dimension of not more than 50 μm,\na resistance of 40 Ω or more but not more than 300 Ω at length of 1 m\n0 %\n-\n31.12.2020\n0.5838\nex 8105 90 00\n10\nBars or wires made of cobalt alloy containing by weight:\n35 % (± 2 %) cobalt,\n25 % (± 1 %) nickel,\n19 % (± 1 %) chromium, and\n7 % (± 2 %) iron,\nconforming to the material specifications AMS 5842\n0 %\n-\n31.12.2023\n0.5570\nex 8207 30 10\n10\nSet of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles\n0 %\np/st\n31.12.2022\n0.5024\nex 8301 60 00\nex 8419 90 85\nex 8479 90 70\nex 8481 90 00\nex 8503 00 99\nex 8515 90 80\nex 8537 10 98\nex 8538 90 99\nex 8708 99 10\nex 8708 99 97\n30\n40\n30\n50\n43\n40\n55\n70\n55\n22\nSilicone or plastic keyboards, comprising:\nparts of common metal, and\nwhether or not comprising parts of plastic,\nepoxy resin reinforced with fibreglass or wood,\nwhether or not printed or surface-treated,\nwith or without electrical conductors,\nwith or without a membrane bonded to the keyboard,\nwith or without mono or multilayer protective film\n0 %\np/st\n31.12.2020\n0.7670\nex 8409 91 00\n25\nAir intake module for engine cylinders consisting of:\na suction pipe,\na pressure sensor,\nan electric throttle,\nhoses,\nbrackets,\nfor use in the manufacture of engines of motor vehicles\n0 %\n-\n31.12.2023\n0.7718\nex 8409 99 00\n75\nHigh pressure fuel rail of galvanised ferrite-pearlite steel with:\nat least one pressure sensor and one valve,\na length of 314 mm or more, but not more than 322 mm,\nan operating pressure not more than 225 MPa,\nan inlet temperature not more than 95 °C,\nambient temperature of – 45 °C or more, but not more than 145 °C,\nfor use in the manufacture of compression ignition engines of motor vehicles\n0 %\n-\n31.12.2024\n0.7377\nex 8481 80 59\n40\nFlow-control valve:\nmade of steel,\nwith an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,\nwith an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,\nwith chromium nitride coating,\nwith a surface roughness of Rp 0,4\n0 %\n-\n31.12.2022\n0.7381\nex 8481 80 59\n50\nElectromagnetic valve for quantity control with:\na plunger,\na solenoid with a of coil resistance of 1,85 Ω or more, but not more than 8,2 Ω\n0 %\n-\n31.12.2022\n0.7604\nex 8484 20 00\n20\nMechanical face sealing device made of two movable rings (one ceramic mating with a thermal conductivity lower than 80 W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side\n0 %\n-\n31.12.2023\n0.5577\nex 8501 31 00\n50\nDC motors, brushless, with:\nan external diameter of 80 mm or more, but not more than 200 mm,\na supply voltage of 9 V or more, but not more than 16 V,\nan output at 20 °C of 300 W or more, but not more than 750 W,\na torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,\na rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,\nwith or without a rotor angle position sensor of resolver type or Hall effect type,\nwith or without a pulley,\nof the kind used in power steering systems for cars\n0 %\n-\n31.12.2022\n0.4855\nex 8501 33 00\nex 8501 40 80\nex 8501 53 50\n30\n50\n10\nElectric drive for motor vehicles, with an output of not more than 315 kW:\nwith an AC or DC motor with or without transmission,\nwith or without power electronics\n0 %\n-\n31.12.2021\n0.5783\nex 8503 00 99\n40\nFuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 8501\n0 %\np/st\n31.12.2022\n0.7029\nex 8505 11 00\n47\nArticles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:\na length of 9 mm or more but not more than 105 mm,\na width of 5 mm or more but not more than 105 mm, and\na height of 2 mm or more but not more than 55 mm\n0 %\n-\n31.12.2021\n0.7511\nex 8505 19 90\n60\nArticles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, intended to become permanent magnets after magnetisation, with the following dimensions:\na length of 10 mm or more but not more than 100 mm (± 1 mm),\na width of 10 mm or more but not more than 100 mm (± 1 mm),\na thickness of 2 mm or more but not more than 15 mm (±0,15 mm)\n0 %\n-\n31.12.2023\n0.6703\nex 8507 60 00\n33\nLithium-ion accumulator, with:\na length of 150 mm or more, but not more than 1 000 mm,\na width of 100 mm or more, but not more than 1 000 mm,\na height of 200 mm or more, but not more than 1 500 mm,\na weight of 75 kg or more, but not more than 200 kg,\na nominal capacity of 150 Ah or more, but not more than 500 Ah,\na nominal output voltage of 230 V AC (Line to neutral) or a nominal voltage of 64 V (± 10 %)\n1,3 %\n-\n31.12.2020\n0.6702\nex 8507 60 00\n37\nLithium-ion accumulator, with:\na length of 1 200 mm or more, but not more than 2 000 mm,\na width of 800 mm or more, but not more than 1 300 mm,\na height of 2 000 mm or more, but not more than 2 800 mm,\na weight of 1 800 kg or more, but not more than 3 000 kg,\na nominal capacity of 2 800 Ah or more, but not more than 7 200 Ah\n1,3 %\n-\n31.12.2020\n0.5342\nex 8507 60 00\n65\nCylindrical lithium ion cell with:\n3,5 VDC to 3,8 VDC,\n300 mAh to 900 mAh, and\na diameter of 10,0 mm to 14,5 mm\n1,3 %\n-\n31.12.2021\n0.6753\nex 8507 60 00\n77\nLithium-ion rechargeable batteries, with:\na length of 700 mm or more, but not more than 2 820 mm,\na width of 935 mm or more, but not more than 1 660 mm,\na height of 85 mm or more, but not more than 700 mm,\na weight of 250 kg or more, but not more than 700 kg,\na power of not more than 175 kWh,\na nominal voltage of 400 V\n1,3 %\n-\n31.12.2020\n0.6863\nex 8512 30 90\n20\nWarning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:\na printed circuit board,\na connector,\nwhether or not a metal holder,\nfor use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n0.6689\nex 8529 90 65\n28\nElectronic assembly comprising a printed circuit board with at least:\nprocessors for multi-media applications and video signal processing,\nFPGA (Field Programmable Gate Array),\nflash memory,\noperating memory,\nwith or without USB, HDMI, VGA- and RJ-45 interfaces,\nsockets and plugs for connecting an LCD-display, an LED lighting and a control panel\n0 %\np/st\n31.12.2020\n0.7251\nex 8537 10 91\n70\nProgrammable motor memory controller for a voltage not exceeding 1 000 V, comprising at least:\na printed circuit with active and passive components,\nan aluminium housing, and\nmultiple connectors\n0 %\np/st\n31.12.2022\n0.6866\nex 8538 90 91\nex 8538 90 99\n20\n50\nInterior antenna for a car door locking system, comprising:\nan antenna module in a plastic housing,\na connection cable with a plug,\nat least two mounting brackets,\nwhether or not PCB including integrated circuits, diodes and transistors,\nfor use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n0.5953\nex 8538 90 99\n95\nCopper base plate, containing more components than Insulated Gate Bipolar Transistor (IGBT) chips and diodes with a voltage of 650 V or more but not more than 1 200 V, for use as a heatsink in the manufacture of IGBT modules\n0 %\np/st\n31.12.2023\n0.6710\nex 8544 30 00\nex 8544 42 90\n60\n50\nFour-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87\n0 %\n-\n31.12.2020\n0.6867\nex 8544 30 00\n85\nExtension two-core cable with two connectors, containing at least:\na rubber grommet,\na metal attachment bracket,\nof a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87\n0 %\np/st\n31.12.2020\n0.5002\nex 8545 90 90\n40\nCorrosion resistant, layered technical fibre substrate of a gas diffuser layer with:\ncontrolled fibre length, flex strength, porosity, thermal conductance, electrical resistance,\na thickness of less than 600 μm,\na weight of less than 500 g/m2\n0 %\nm2\n31.12.2020\n0.7581\nex 8708 50 20\nex 8708 50 99\nex 8708 99 10\nex 8708 99 97\n60\n15\n45\n65\nCar transfer case with single input and dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 mm × 570 mm × 510 mm, comprising:\nat least an actuator,\nwhether or not an interior distribution by chain\n0 %\n-\n31.12.2024\n0.6711\nex 8708 80 20\nex 8708 80 35\n10\n10\nUpper strut insulator containing:\na metal holder with three mounting screws, and\na rubber bump,\nfor use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n0.6705\nex 8708 80 20\nex 8708 80 91\n20\n10\nRear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, for use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n0.6704\nex 8708 80 20\nex 8708 80 91\n30\n20\nRear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, for use in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n0.7365\nex 8708 80 99\n30\nSurface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:\nwith a chrome coating,\nof a diameter of 11 mm or more, but not more than 28 mm,\nof a length of 80 mm or more, but not more than 600 mm,\nwith a threaded end or a mandrel for resistance welding\n0 %\n-\n31.12.2022\n0.6687\nex 8708 95 10\nex 8708 95 99\n10\n20\nInflatable safety cushion of high-strength polyamide fibre:\nsewn,\nfolded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming\n0 %\np/st\n31.12.2020\n0.6686\nex 8714 10 90\n10\nMotorcycle fork rod inner tubes:\nof SAE1541 carbon steel,\nwith a hard chromium layer of 20 μm (+ 15 μm/– 5 μm),\nwith a wall thickness of 1,3 mm or more, but not more than 1,6 mm,\nwith an elongation at break of 15 %,\nperforated\n0 %\np/st\n31.12.2020\n0.5692\nex 9002 11 00\n20\nLenses:\nmeasuring not more than 95 mm × 55 mm × 50 mm,\nwith a resolution of 160 lines/mm or better, and\nwith a zoom ratio of 18 times\n0 %\n-\n31.12.2022\n0.6527\nex 9029 20 31\nex 9029 90 00\n20\n30\nClustered instrument panel with a microprocessor control board, with or without stepping motors, LED indicators or LCD display showing at least:\nspeed,\nengine revolutions,\nengine temperature,\nthe fuel level,\ncommunicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2024\n0.5025\nex 9401 90 80\n10\nRatchet disk for use in the manufacture of reclining car seats\n0 %\np/st\n31.12.2020’\n(4) the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:\nSuspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).\nSerial number\nCN code\nTARIC\nDescription\nRate of autonomous duty\nSupplementary Unit\nDate foreseen for mandatory review\n‘0.7897\nex 2825 20 00\n10\nLithium hydroxide monohydrate (CAS RN 1310-66-3)\n2,6 %\n-\n31.12.2020\n0.7895\nex 2903 72 00\n10\nDichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2024\n0.7826\nex 2903 79 30\n30\n1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2024\n0.7914\nex 2905 39 95\n70\n2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7828\nex 2909 30 38\n50\n2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2024\n0.7846\nex 2909 50 00\n40\n2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7910\nex 2909 60 00\n50\nSolution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes\n0 %\n-\n31.12.2024\n0.7824\nex 2914 50 00\n15\n1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7834\nex 2915 40 00\n10\nEthyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7830\nex 2915 40 00\n20\nSodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more\n0 %\n-\n31.12.2024\n0.7899\nex 2915 90 70\n18\nMyristitic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7845\nex 2916 39 90\n22\n6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7827\nex 2916 39 90\n27\nMethyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2024\n0.7880\nex 2917 19 80\n45\nIron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more\n0 %\n-\n31.12.2024\n0.7907\nex 2918 19 98\n50\n12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters\n0 %\n-\n31.12.2024\n0.7864\nex 2918 30 00\n35\n3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)\n0 %\n-\n31.12.2024\n0.7898\nex 2920 29 00\n80\n2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a content of 95 % or more by weight (CAS RN 126050-54-2)\n0 %\n-\n31.12.2024\n0.7894\nex 2921 51 90\n10\nN-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2024\n0.7860\nex 2922 19 00\n15\nAqueous solution, containing by weight:\n73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),\n4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)\n0 %\n-\n31.12.2024\n0.7853\nex 2922 49 85\n13\nO-Benzylglycine p-toluenesulphonate (CAS RN 1738-76-7) with a purity by weight of 93 % or more\n0 %\n-\n31.12.2024\n0.7879\nex 2923 90 00\n50\nBetaine hydrochloride (CAS RN 590-46-5) with a purity by weight of 93 % or more\n0 %\n-\n31.12.2024\n0.7841\nex 2924 29 70\n47\n(S)-tert-butyl(1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7832\nex 2925 29 00\n50\n(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7859\nex 2930 90 98\n29\n4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7833\nex 2930 90 98\n31\n(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7838\nex 2932 20 90\n53\n(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7855\nex 2932 99 00\n37\n4-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol (CAS RN 1951-26-4) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2024\n0.7903\nex 2933 19 90\n13\n3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7835\nex 2933 19 90\n17\n1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7918\nex 2933 19 90\n23\nFluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more\n0 %\n-\n31.12.2024\n0.7836\nex 2933 19 90\n27\n3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7844\nex 2933 39 99\n74\n4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7906\nex 2933 39 99\n81\n4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7866\nex 2933 39 99\n82\nPicloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a purity by dry weight of 92 % or more\n0 %\n-\n31.12.2024\n0.7825\nex 2933 59 95\n68\nGuanine (CAS RN 73-40-5) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2024\n0.7839\nex 2933 99 80\n66\n(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7843\nex 2934 99 90\n17\n(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7837\nex 2934 99 90\n29\n(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7840\nex 2934 99 90\n33\n(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more\n0 %\n-\n31.12.2024\n0.7842\nex 2934 99 90\n69\n3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more\n0 %\n-\n31.12.2024\n0.7854\nex 2935 90 90\n70\n(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more\n0 %\n-\n31.12.2024\n0.7885\nex 3204 15 00\n20\nColourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight\n0 %\n-\n31.12.2024\n0.7922\nex 3823 19 10\n20\n12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters\n0 %\n-\n31.12.2024\n0.7831\nex 3824 99 92\n62\nSolution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane\n0 %\n-\n31.12.2024\n0.7861\nex 3903 90 90\n33\nCopolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more\n0 %\n-\n31.12.2024\n0.7865\nex 3909 40 00\n70\nPolymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80 °C or more but not more than 95 °C according to standard ASTM E28-92 (CAS RN 112484-41-0)\n0 %\n-\n31.12.2024\n0.7882\nex 3920 69 00\n30\nMono- or multilayer, transverse oriented, shrink film:\ncomposed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,\nwith a thickness of 20 μm or more but not more than 100 μm,\nwith a length of 2 385 m or more but not more than 9 075 m,\nbiodegradable and compostable (as determined by the method EN 13432)\n0 %\n-\n31.12.2024\n0.7883\nex 3920 69 00\n70\nMono- or multilayer, biaxially oriented film:\ncomposed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,\nwith a thickness of 9 μm or more but not more than 120 μm,\nwith a length of 1 395 m or more but not more than 21 560 m,\nbiodegradable and compostable (as determined by the method EN 13432)\n0 %\n-\n31.12.2024\n0.7891\nex 7326 90 94\n40\nSteel ball neck, drop forged, machined, also heat treated or surface treated, with an angle between the centre of the conical head and the arm of less than 90° or with an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars\n0 %\n-\n31.12.2024\n0.7911\nex 7506 20 00\n10\nSheets and strips in coils of nickel alloy C276 (EN 2.4819) with\na thickness of 0,5 mm or more but not more than 3 mm,\na width of 770 mm or more but not more than 1 250 mm\n0 %\n-\n31.12.2024\n0.7851\nex 8409 99 00\n25\nHoses assembly for fuel return from injectors to engine fuel unit, consisting of at least:\nthree rubber hoses, whether or not with a protective braided sleeving,\nthree connectors for connecting fuel injectors,\nfive metal clamps,\none T-shaped plastic joint,\nfor use in the manufacture of engines of motor vehicles\n0 %\n-\n31.12.2024\n0.7850\nex 8481 30 99\n30\nBrake booster check valve assembly, containing at least:\nthree vulcanized rubber hoses,\none membrane valve,\ntwo metal clamps,\none metal holder,\nwhether or not a connecting metal pipe,\nfor use in the manufacture of motor vehicles\n0 %\n-\n31.12.2024\n0.7920\nex 8483 40 59\n30\nHydrostatic speed changer:\nwith a hydro pump and a differential with wheel axle,\nwhether or not with a fan impeller and/or a pulley,\nfor use in the manufacture of lawn mowers of Subheadings 8433 11 and 8433 19 or other mowers of Subheading 8433 20\n0 %\np/st\n31.12.2024\n0.7857\nex 8501 10 10\n40\nSynchronous hybrid stepper motor with:\nan output not exceeding 18 W,\ntwo phases,\na rated current of not more than 2,5 A/phase,\na rated voltage of not more than 20 V,\nwith or without a threaded shaft,\nfor use in the manufacture of 3D printers\n0 %\n-\n31.12.2024\n0.7888\nex 8507 60 00\n68\nLithium-ion accumulator in a metal housing with:\na length of 173 mm or more but not more than 175 mm,\na width of 41,5 mm or more but not more than 43 mm,\na height of 85 mm or more but not more than 103 mm,\na nominal voltage of 3,6 V or more but not more than 3,75 V, and\na nominal capacity of 93 Ah or more but not more than 94 Ah\n1,3 %\n-\n31.12.2024\n0.7873\nex 8537 10 91\n20\nElectronic assembly containing:\na microprocessor,\na programmable memory controller and other electronic components mounted on a printed circuit,\nwith or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,\nfor use in the manufacture of products of Subheadings 8418 21, 8418 29, 8421 12, 8422 11, 8450 11, 8450 12, 8450 19, 8451 21, 8451 29 and 8516 60\n0 %\n-\n31.12.2024\n0.7848\nex 8544 30 00\n45\nLinking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor – BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars\n0 %\n-\n31.12.2024\n0.7847\nex 8544 30 00\n55\nConnecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars\n0 %\n-\n31.12.2024\n0.7856\nex 8708 40 20\nex 8708 40 50\n70\n60\nManual gearbox in cast aluminium housing for transverse installation with:\na width of not more than 480 mm,\na height of not more than 400 mm,\na length of not more than 550 mm,\nfive gears,\na differential gear,\nan engine torque of 250 Nm or less,\nfor use in the manufacture of motor vehicles of Heading 8703\n0 %\n-\n31.12.2024\n0.7849\nex 8708 93 10\nex 8708 93 90\n40\n40\nClutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:\ncruise control reset,\nelectronic parking brake release,\nstart and stop engine management under Idle Stop and Go system (ISG),\nfor use in the manufacture of passenger vehicles\n0 %\n-\n31.12.2024\n0.7921\nex 8708 99 97\n18\nHydrostatic speed changer:\nwith a hydro pump and a differential with wheel axle,\nwhether or not with a fan impeller and/or a pulley,\nfor use in the manufacture of tractors of Subheadings 8701 91 90 and 8701 92 90, whose main function is that of a lawn mower\n0 %\np/st\n31.12.2023’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).;"
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2020/874/annex",
    "retrieved_at": "2026-11-01T14:42:34.226983+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}