# The Explosives Regulations 2014, Regulation 68: UK marking


(1) The UK marking must be affixed visibly, legibly and indelibly—
(a) to the civil explosive; or
(b) where paragraph (1A) applies, to—
(i) a label affixed to the civil explosive; or
(ii) the accompanying documents.
(1A) For a period of seven years beginning with IP completion day, the UK marking may be affixed to—
(a) a label affixed to the civil explosive; or
(b) the accompanying documents.
(2) Where paragraph (1A) does not apply and it is not possible or warranted, on account of the nature of the civil explosive, to affix the UK marking in accordance with paragraph (1), the UK marking must be affixed to—
(a) the packaging; and
(b) the accompanying documents.
(3) The UK marking must be followed by the identification number of the approved body which carried out the relevant conformity assessment procedure for the civil explosive, where that body is involved in the production control phase.
(4) The identification number of the approved body must be affixed—
(a) by the approved body itself; or
(b) under the instructions of the approved body, by the manufacturer or the manufacturer’s authorised representative.
(5) In the case of a civil explosive—
(a) manufactured for the manufacturer’s own use;
(b) transported and delivered unpackaged or in a mobile explosives manufacturing unit for its direct unloading into the blast-hole; or
(c) manufactured at the blasting site which is loaded immediately after being produced,
the UK marking must be affixed to the accompanying documents.

---
Source: https://www.legislation.gov.uk/uksi/2014/1638/regulation/68 (the official version)
Page: https://openlegislation.uk/explosives-regulations-2014/regulation-68
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.