OpenLegislation

Regulation 14 Amendments to Category 6 - Sensors and Lasers

Original text. Later amendments are not shown.

(1)

The section headed Category 6 - Sensors and Lasers is amended as follows.

(2)

In the section headed 6A Systems, Equipment and Components—

(a)

in entry 6A001.a.1.a.—

(i)

before entry 6A001.a.1.a.1., insert—

“Technical Note:

For the purposes of 6A001.a.1.a., ‘enhancement’ includes the ability to compensate by external means.”;

(ii)

at the end of entry 6A001.a.1.a.1., for the Technical Notes, substitute—

“Technical Note:

For the purposes of 6A001.a.1.a.1.c., ’sounding resolution’ is the swath width (degrees) divided by the maximum number of soundings per swath.”;

(b)

in entry 6A001.a.2.b.2., omit the Technical Note;

(c)

at the end of entry 6A001.a.2.b.8., for the Technical Note, substitute—

“

Technical Notes:
For the purposes of 6A001.a.2.b.:
1.Hydrophone arrays consist of a number of hydrophone providing multiple acoustic output channels.
2.‘Able to be modified’ means having provisions to allow a change of the wiring or interconnections to alter hydrophone group spacing or operating depth limits. These provisions are: spare wiring exceeding 10% of the number of wires, hydrophone group spacing adjustment blocks or internal depth limiting devices that are adjustable or that control more than one hydrophone group.

”;

(d)

in entry 6A002.a.2.b.2.b., for “‘charge multiplication’” substitute ““charge multiplication””;

(e)

in Note 2 to entry 6A002.a.3., in paragraph c.2., for “in place.” substitute “in place;”;

(f)

after paragraph d to Note 2 of entry 6A002.a.3, omit the Technical Note;

(g)

in entry 6A002.b.1., for “Instantaneous-Field-Of-View” substitute “Instantaneous Field of View”;

(h)

in entry 6A002.c.3., for “Solid state ” substitute “Solid-state”;

(i)

in the Technical Note to entry 6A002.f., after ““focal plane array”” omit “(“FPA”)”;

(j)

in entry 6A003.b.1. —

(i)

for “solid state sensors” substitute “solid-state sensors”;

(ii)

after “10 nm” omit “,”;

(k)

in entry 6A003.b.1.a., for “solid state”, in each place it occurs, substitute “solid-state”;

(l)

in entry 6A003.b.2.a., after “10 nm” omit “,”;

(m)

in Note 3 to entry 6A003.b.4.—

(i)

in paragraph b.1. for “Instantaneous-Field-of-View” substitute “Instantaneous Field of View”;

(ii)

at the end of paragraph b.1., insert—

“Technical Note:

For the purposes of 6A003.b.4. Note 3.b.1., ‘Instantaneous Field of View (IFOV) is the lesser figure of the ‘Horizontal IFOV’ or the ‘Vertical IFOV’.

‘Horizontal IFOV’ = horizontal Field of View (FOV)/number of horizontal detector elements

‘Vertical IFOV’ = vertical Field of View (FOV)/number of vertical detector elements.”;

(iii)

at paragraph b.4.a., for “field-of-view” substitute “Field of View”;

(iv)

omit the Technical Notes;

(n)

in Note 4 to entry 6A003.b.4., at paragraph a.1.d., after “equipment;” omit “and”;

(o)

at the end of Note 4 to entry 6A003.b.4., insert—

“Technical Note:

For the purposes of 6A003.b.4., ‘direct view’ refers to an imaging camera operating in the infrared spectrum that presents a visual image to a human observer using a near-to-eye micro display incorporating any light-security mechanism.”;

(p)

in entry 6A004.a.1., for “Technical Note:” substitute “Technical Notes:”;

(q)

in entry 6A005—

(i)

in Note 2, for “‘non-repetitive pulsed’” substitute ““non-repetitive pulsed””;

(ii)

omit the Technical Note to Note 2;

(iii)

for Note 6, substitute—

“Technical Note:

For the purposes of 6A005.a. and 6A005.b., ‘single transverse mode’ refers to “lasers” with a beam profile having an M2-factor of less than 1,3, while ‘multiple transverse mode’ refers to “lasers” with a beam profile having an M2-factor equal to or greater than 1,3.”;

(r)

before entry 6A005.a., omit the Technical Note beginning with “For the purposes of 6A005., ‘wall-plug”;

(s)

in entry 6A005.a.6.b.1., for “‘Wall-plug efficiency’” substitute ““Wall-plug efficiency””;

(t)

in Note 1 to entry 6A005.a.6.b., for “note” substitute “Note”;

(u)

in entry 6A005.b.—

(i)

for ““pulsed lasers”” substitute “‘pulsed lasers’”;

(ii)

at the end, insert—

“Technical Note:

For the purposes of 6A005.b., a ‘pulsed laser’ is a “laser” having a “pulse duration” that is less than or equal to 0,25 seconds.”;

(v)

in entry 6A005.b.6., for “‘Wall-plug efficiency’”, in each place it occurs, substitute ““Wall-plug efficiency””;

(w)

at the end of entry 6A005.d.1., insert—

“

Technical Notes:
For the purposes of 6A005.d.1.:
1.Semiconductor “lasers” are commonly called “laser” diodes.
2.A ‘bar’ (also called a semiconductor “laser” ‘bar’, a “laser” diode ‘bar’ or diode ‘bar’) consists of multiple semiconductor “lasers” in a one-dimensional array.
3.A ‘stacked array’ consists of multiple ‘bars’ forming a two-dimensional array of semiconductor “lasers”.

”;

(x)

in entry 6A005.d.1.b.1.—

(i)

for “1 400” substitute “780”;

(ii)

after “power” omit “,”;

(y)

for entries 6A005.d.1.b.2 and 6A005.d.1.b.3., substitute—

“

2.Wavelength equal to or greater than 780 nm and less than 1 100 nm and average or CW output power exceeding 30 W;
3.Wavelength equal to or greater than 1 100 nm and less than 1 400 nm and average or CW output power exceeding 25 W;
4.Wavelength equal to or greater than 1 400 nm and less than 1 900 nm and average or CW output power exceeding 2,5 W; or
5.Wavelength equal to or greater than 1 900 nm and average or CW output power exceeding 1 W;

”.

(z)

in entry 6A005.d.1.e., omit the Technical Notes;

(z1)

in entry 6A005.d.5.—

(i)

for ““Chemical lasers”” substitute “‘Chemical lasers’”;

(ii)

at the end, insert—

“Technical Note:

For the purposes of 6A005.d.5., ‘chemical laser’ is a “laser” in which the excited species is produced by the output energy from a chemical reaction.”;

(z2)

in entry 6A005.d.6., for “‘Non-repetitive pulsed’” substitute ““Non-repetitive pulsed”” and for “Nd: glass” substitute “Nd:glass”;

(z3)

in entry 6A005.e.3.c.2., for “10 kW/cm2.” substitute “10 kW/cm2;”;

(z4)

in the N.B. to entry 6A005.f., for “Super-High” substitute “Super High”;

(z5)

in entry 6A008.h.2.—

(i)

for ““Radar frequency agility”” substitute “‘Radar frequency agility’”;

(ii)

at the end, insert—

“Technical Note:

For the purposes of 6A008.h., ‘radar frequency agility’ applies to any technique which changes, in a pseudo-random sequence, the carrier frequency of a pulsed radar transmitter between pulses or between groups of pulses by an amount equal to or larger than the pulse bandwidth.”;

(z6)

in the Technical Notes to entry 6A008—

(i)

after the heading “Technical Notes:”, on a new line insert “For the purposes of 6A008:”;

(ii)

in paragraph 1, for “For the purposes of 6A008, ‘marine” substitute “ ‘Marine”;

(iii)

in paragraph 2, for “For the purposes of 6A008, ‘vessel” substitute “ ‘Vessel”;

(z7)

in the Note to entry 6A225—

(i)

for “Interferometers) and PDV” substitute “Interferometers), PDV”;

(ii)

at the end, insert “and microwave velocity interferometers, including optic-microwave mixing velocimeters”.

(3)

In the section headed 6C Materials—

(a)

in entry 6C004.b.4., after “diphosphide);” omit “or”;

(b)

in the Technical Note to entry 6C005.b., at the end, omit “1.”.

(4)

In the section headed 6D Software, in entry 6D003.c., after “Note 3.a.” insert “;”.