Regulation 17 Amendments to Category 9 - Aerospace and Propulsion
The section headed Category 9 - Aerospace and Propulsion is amended as follows.
In the section headed 9A Systems, Equipment and Components—
in entry 9A001.a., after “9E003.i.” omit “;”;
in entry 9A004—
for “payloads” substitute “mission equipment”;
after entry 9A004.b., insert—
“
N.B. For “sub-orbital craft”, see 9A004.h. ”;
in entry 9A004.d., for “payloads” substitute “mission equipment”;
for entry 9A004.e.1. to entry 9A004.e.3. substitute—
“
1. Command and telemetry data handling; Note: 9A004.e.1. includes bus data management, storage, and processing. 2. Payload data handling; or Note: 9A004.e.2. includes management, storage, and processing of “spacecraft mission equipment” data. 3. Attitude and orbit control; Note: 9A004.e.3. includes sensing and actuation to determine and control the position and orientation of a “spacecraft”. ”;
in entry 9A007.e.—
for “‘strong mechanical bond’” substitute ““strong mechanical bond””;
omit the Technical Note;
in entry 9A008.a., for “‘strong mechanical bond’” substitute ““strong mechanical bond””;
in the Technical Notes to entry 9A012.a.—
after the heading “Technical Notes:” on a new line insert “For the purposes of 9A012.a.:”;
in paragraph 1, for “For the purposes of 9A012.a., ‘operator’” substitute “‘ Operator’”;
in paragraph 2, for “For the purposes of 9A012.a., ‘endurance’” substitute “ ‘Endurance’”;
in paragraph 3, for “For the purposes of 9A012.a., ‘natural” substitute “ ‘Natural”.
In the section headed 9B Test, Inspection and Production Equipment—
after the heading, on a new line insert—
“
Note: 9B includes test, inspection and production equipment applicable to aero, aero-derivative, industrial or marine gas turbine engines. ”;
in entry 9B003 after “turbine” insert “engine”;
in entry 9B004—
for “solid state” substitute “solid-state”;
for “turbines” substitute “turbine engines”.
In the section headed 9D Software—
in the N.B. to entry 9D005—
for “listed” substitute “specified”;
for “payloads”” substitute “mission equipment””;
in entry 9D101, after “9B106,” insert “9B107,”.
In the section headed 9E Technology—
in entry 9E003, after “Other “technology” as follows:” insert—
“
Note: 9E003 includes technology applicable to aero, aero-derivative, marine or industrial gas turbine engines. ”;
in entry 9E003.a.1., for “Gas turbine” substitute “Turbine”;
in entry 9E003.a.2.e., for “Utilisation of ‘pressure” substitute “‘Pressure”;
in the Technical Notes to entry 9E003.a.2.—
in paragraph 2, after “purposes of” insert “9E003.a.2.a. and”;
in paragraph 3—
after “9E003.a.2.e.,” omit “in”;
after “‘pressure gain combustion’” insert “refers to a combustor where”;
in the N.B. to entry 9E003.a.2.—
for “See 9E003.e. for “technology” “required” for” substitute “For”;
after “holes” insert “, see 9E003.c. for “technology” “required””;
in the Technical Note to entry 9E003.a.5., after “purposes of” insert “9E003.a.4. and”;
in entry 9E003.a.6., for “solid state” substitute “solid-state”;
in entry 9E003.a.8., after “tolerant’” omit “gas turbine engine”;
in the Technical Notes to entry 9E003.c.—
after the heading “Technical Notes:” on a new line insert “For the purposes of 9E003.c.:”;
in paragraph 1, for “For the purposes of 9E003.c., the” substitute “The”;
in paragraph 2, for “For the purposes of 9E003.c., ‘hole” substitute “‘Hole”;
in paragraph 3, for “For the purposes of 9E003.c., ‘incidence” substitute “‘Incidence”;
in paragraph 4, for “For the purposes of 9E003.c., methods” substitute “Methods” and for “Electrical Discharge Machining (EDM)” substitute “electrical discharge machining”;
in the Technical Note to entry 9E003.e., for “widest” substitute “largest”;
in entry 9E003.i., after ““Technology” for” insert “gas turbine engine”;
in entry 9E003.i.3., for “stability.” substitute “stability;”;
in entry 9E003.k.—
in the N.B.1. for “See 9E003.h. for” substitute “For” and for “technology.” substitute “technology, see 9E003.h.”;
in the N.B.2. for “See 9E003.i. for” substitute “For” and for “technology.” substitute “technology, see 9E003.i.”;
in entry 9E102, after “9B106,” insert “9B107,”.