Paragraph 1 5A001
Being underwater communications systems having any of the following characteristics:
An acoustic carrier frequency outside the range from 20 to 60kHz;
Using an electromagnetic carrier frequency below 30kHz; or
Using electronic beam steering techniques;
Stored programme controlled switching equipment and related signalling systems, and specially designed components and accessories therefor, having any of the following characteristics, functions or features:
Note: Statistical multiplexers with digital input and digital output which provide switching are treated as stored programme controlled switches.
Common channel signalling;
Note: Signalling systems in which the signalling channel is carried in and refers to no more than 32 multiplexed channels forming a trunk line of no more than 2·1Mbit/s, and in which the signalling information is carried in a fixed, time division multiplexed channel without the use of labelled messages, are not considered to be common channel signalling systems.
Containing Integrated Services Digital Network (ISDN) functions and having either of the following:
Switch—terminal (e.g.,subscriber line) interfaces with a digital transfer rate at the highest multiplex level exceeding 192,000bit/s, including the associated signalling channel (e.g.,2B+D); or
The capability that a signalling message received by a switch on a given channel that is related to a communication on another channel may be passed through to another switch;
Note: Sub—head c.2. of this entry does not preclude:
The evaluation and appropriate actions taken by the receiving switch;
Unrelated user message traffic on a D channel of ISDN.
Multi—level priority and pre—emption for circuit switching;
Note: Sub—head c.3. of this entry does not specify single—level call pre—emption.
Dynamic adaptive routing;
Routing or switching of datagram packets;
Routing or switching of fast select packets;
Note: The restrictions in sub—heads c.5. and c.6. of this entry do not apply to networks using only network access controllers or to network access controllers themselves.
Designed for automatic hand—off of cellular radio calls to other cellular switches or for automatic connection to a centralized subscriber data base common to more than one switch;
Being packet switches, circuit switches and routers with ports or lines exceeding either:
A data signalling rate of 64,000bit/s per channel for a communications channel controller; or
Note: Sub—head c.8.a. of this entry does not preclude the multiplexing over a composite link of communications channels not specified in sub—head c.8.a.
A digital transfer rate of 33Mbit/s for a network access controller and related common medium;
Optical switching;
Employing Asynchronous Transfer Mode (ATM) techniques;
Containing stored programme controlled digital crossconnect equipment with a digital transfer rate exceeding 8·5Mbit/s per port;
Centralized network control having both of the following characteristics:
Receives data from the nodes; and
Processes these data in order to provide control of traffic not requiring operator decisions, thereby performing dynamic adaptive routing;
Note: Head d. of this entry does not preclude control of traffic as a function of predictable statistical traffic conditions.
Optical fibre communication cables, optical fibres and specially designed components and accessories therefor, as follows:
Optical fibres or cables of more than 50m in length having either of the following characteristics:
Designed for single mode operation; or
For optical fibres, capable of withstanding a Proof Test tensile stress of 2×109 N/m2 or more;
Technical Note: Proof Test: On—line or off—line production screen testing that dynamically applies a prescribed tensile stress over a 0·5 to 3m length of fibre at a running rate of 2 to 5m/s while passing between capstans approximately 150mm in diameter. The ambient temperature is a nominal 293K (20°C) and relative humidity 40%.
Components and accessories specially designed for the optical fibres or cables specified in sub—head e.1. of this entry;
except:
Connectors for use with optical fibres or cables with a repeatable coupling loss of 0·5dB or more;
Optical fibre cables and accessories designed for underwater use (for fibre—optic hull penetrators or connectors, see head c. of entry 8A002);
Phased array antennae, operating above 10·5GHz, containing active elements and distributed components, and designed to permit electronic control of beam shaping and pointing.
Note: Head f. of this entry does not specify landing systems with instruments meeting International Civil Aviation Organisation (ICAO) standards (microwave landing systems (MLS)), published by ICAO in Annex 10 of Volume 1.