{ "url": "https://openlegislation.uk/export-of-goods-control-order-1994/schedule-1/paragraph-1B", "json_url": "https://openlegislation.uk/export-of-goods-control-order-1994/schedule-1/paragraph-1B.json", "legislation": "uksi/1994/1191", "legislation_title": "The Export of Goods (Control) Order 1994", "legislation_url": "https://openlegislation.uk/export-of-goods-control-order-1994", "path": "schedule/1/paragraph/1B", "kind": "paragraph", "number": "1B", "heading": "Equipment, Assemblies and Components", "text": "Test, Inspection and Production Equipment\n1B001 Equipment for the production of fibres, prepregs, preforms or composites specified in entries 1A002 or 1C010, as follows, and specially designed components and accessories therefor:\na. Filament winding machines of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more axes, specially designed for the manufacture of composite structures or laminates from fibrous or filamentary materials;\nb. Tape-laying or tow-placement machines of which the motions for positioning and laying tape, tows or sheets are coordinated and programmed in two or more axes, specially designed for the manufacture of composite airframe or missile structures;\nc. Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, for weaving, interlacing or braiding fibres to manufacture composite structures;\nexcept:\nTextile machinery not modified for the above end-uses;\nd. Equipment specially designed or adapted for the production of reinforcement fibres, as follows:\n1. Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating;\n2. Equipment for the chemical vapour deposition of elements or compounds on heated filamentary substrates to manufacture silicon carbide fibres;\n3. Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);\n4. Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment;\ne. Equipment for producing prepregs specified in head e. of entry 1C010 by the hot melt method;\nf. Non-destructive inspection equipment capable of inspecting defects three dimensionally, using ultrasonic or X-ray tomography and specially designed for composite materials.\nIn this entry, “missile” means complete rocket systems and unmanned air vehicle systems.\n1B002 Systems and components therefor specially designed for producing metal alloys, metal alloy powder or alloyed materials specified in sub-head a.2. of entry 1C002, head b. of entry 1C002 or head c. of entry 1C002.\n1B003 Tools, dies, moulds or fixtures, for superplastic forming or diffusion bonding titanium or aluminium or their alloys, specially designed for the manufacture of:\na. Airframe or aerospace structures;\nb. Aircraft or aerospace engines; or\nc. Specially designed components for those structures or engines.\n1B101 Equipment, other than that specified in entry 1B001, for the production of structural composites as follows; and specially designed components and accessories therefor:\nNote: Components and accessories specified in this entry include moulds, mandrels, dies, fixtures and tooling for the preform pressing, curing, casting, sintering or bonding of composite structures, laminates and manufactures thereof.\na. Filament winding machines of which the motions for positioning, wrapping and winding fibres can be coordinated and programmed in three or more axes, designed to fabricate composite structures or laminates from fibrous or filamentary materials, and coordinating and programming controls;\nb. Tape-laying machines of which the motions for positioning and laying tape and sheets can be coordinated and programmed in two or more axes, designed for the manufacture of composite airframe and missile structures;\nc. Multi-directional, multi-dimensional weaving machines or interlacing machines, including adapters and modification kits for weaving, interlacing or braiding fibres to manufacture composite structures;\nexcept:\nTextile machinery which has not been modified for the above end uses;\nd. Equipment designed or modified for the production of fibrous or filamentary materials as follows:\n1. Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon or polycarbosilane) including special provision to strain the fibre during heating;\n2. Equipment for the vapour deposition of elements or compounds on heated filament substrates; and\n3. Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);\ne. Equipment designed or modified for special fibre surface treatment or for producing prepregs and preforms specified in entry 9A110.\nNote: Equipment covered by this sub-head includes rollers, tension stretchers, coating equipment, cutting equipment and clicker dies.\n1B115 Equipment for the production, handling and acceptance testing of goods specified in entry 1C115, and specially designed components therefor.\nNote: The only mixers specified in this entry are those which have provision for mixing under vacuum in the range of zero to 13.326 kPa and with temperature control capability of the mixing chamber:\na. Batch mixers having a total volumetric capacity of 110 litres or more and at least one mixing/kneading shaft mounted off centre;\nb. Continuous mixers having two or more mixing/kneading shafts and capability to open the mixing chamber.\n1B116 Specially designed nozzles for producing pyrolitically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1573 K (1300°C) to 3173 K (2900°C) temperature range at pressures of 130 Pa to 20 kPa.\n1B201 Filament winding machines, other than those specified in entries 1B001 or 1B101, in which the motions for positioning, wrapping, and winding fibres are coordinated and programmed in two or more axes, specially designed to fabricate composite structures or laminates from fibrous or filamentary materials and capable of winding cylindrical rotors of diameter between 75 mm and 400 mm and lengths of 600 mm or greater and coordinating and programming controls and precision mandrels therefor.\n1B225 Electrolytic cells for fluorine production with a production capacity greater than 250g of fluorine per hour.\n1B226 Electromagnetic isotope separators, designed for or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater.\nNote: This entry includes separators:\na. Capable of enriching stable isotopes;\nb. With the ion sources and collectors both in the magnetic field and those configurations in which they are external to the field.\n1B227 Ammonia synthesis converters, ammonia synthesis units in which the synthesis gas (nitrogen and hydrogen) is withdrawn from an ammonia/hydrogen high-pressure exchange column and the synthesized ammonia is returned to that column.\n1B228 Hydrogen-cryogenic distillation columns having all of the following characteristics:\na. Designed to operate with internal temperatures of 35 K (-238°C) or less;\nb. Designed to operate at an internal pressure of 0.5 to 5 MPa (5 to 50 atmospheres);\nc. Constructed of fine-grain stainless steels of the 300 series with low sulphur content or equivalent cryogenic and H2-compatible materials; and\nd. With internal diameters of 1 m or greater and effective lengths of 5 m or greater.\n1B229 Water-hydrogen sulphide exchange tray columns constructed from fine carbon steel with a diameter of 1.8 m or greater to operate at a nominal pressure of 2 MPa or greater.\nNotes:\n1. For columns which are specially designed or prepared for the production of heavy water see entry B40 of Group 2 of Part III of this Schedule.\n2. This entry includes internal contactors of the columns, which are segmented trays with an effective assembled diameter of 1.8 m or greater, such as sieve trays, valve trays, bubble cap trays, and turbogrid trays designed to facilitate countercurrent contacting and constructed of materials resistant to corrosion by hydrogen sulphide/water mixtures, such as 304L or 316 stainless steel.\n3. Fine Carbon steels include steels such as specified by ASTM A516.\n1B230 Pumps circulating solutions of diluted or concentrated potassium amide catalyst in liquid ammonia (KNH2/NH3), with all of the following characteristics:\na. Airtight (i.e., hermetically sealed);\nb. For concentrated potassium amide solutions (1% or greater), operating pressure of 1.5-60 MPa (15-600 atmospheres); for dilute potassium amide solutions (less than 1%), operating pressure of 20-60 MPa (200-600 atmospheres); and\nc. A capacity greater than 8.5 m3/hr.\n1B231 Facilities or plants for the production, recovery, extraction, concentration, or handling of tritium, and equipment as follows:\na. Hydrogen or helium refrigeration units capable of cooling to 23 K (-250°C) or less, with heat removal capacity greater than 150 Watts; or\nb. Hydrogen isotope storage and purification systems using metal hydrides as the storage, or purification medium.", "extent": null, "status": null, "version": "current", "annotations": [ { "type": "footnote", "label": "f1", "text": "See also entries 1B101 and 1B201." }, { "type": "footnote", "label": "f2", "text": "See also entry 1B201." } ], "outstanding_effects": [ { "type": "am", "affecting": "uksi/2001/729", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2001" }, { "type": "rev", "affecting": "uksi/2001/729", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2001" }, { "type": "revoked", "affecting": "uksi/1996/2663", "affecting_title": "The Export of Goods (Control) (Amendment No. 2) Order 1996" }, { "type": "revoked", "affecting": "uksi/1996/2663", "affecting_title": "The Export of Goods (Control) (Amendment No. 2) Order 1996" }, { "type": "substituted", "affecting": "uksi/1996/2663", "affecting_title": "The Export of Goods (Control) (Amendment No. 2) Order 1996" }, { "type": "substituted", "affecting": "uksi/1997/2758", "affecting_title": "The Export of Goods (Control) (Amendment No. 3) Order 1997" }, { "type": "amended", "affecting": "uksi/1997/2758", "affecting_title": "The Export of Goods (Control) (Amendment No. 3) Order 1997" }, { "type": "amended", "affecting": "uksi/1997/2758", "affecting_title": "The Export of Goods (Control) (Amendment No. 3) Order 1997" }, { "type": "rev.in pt.", "affecting": "uksi/1999/63", "affecting_title": "The Export of Goods (Control) (Amendment) Order 1999" }, { "type": "amended", "affecting": "uksi/1999/63", "affecting_title": "The Export of Goods (Control) (Amendment) Order 1999" }, { "type": "amended", "affecting": "uksi/1999/63", "affecting_title": "The Export of Goods (Control) (Amendment) Order 1999" }, { "type": "revoked", "affecting": "uksi/1999/63", "affecting_title": "The Export of Goods (Control) (Amendment) Order 1999" }, { "type": "amended", "affecting": "uksi/1999/63", "affecting_title": "The Export of Goods (Control) (Amendment) Order 1999" }, { "type": "am", "affecting": "uksi/2001/729", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2001" }, { "type": "rev. in pt.", "affecting": "uksi/1995/271", "affecting_title": "The Dual-Use and Related Goods (Export Control) Regulations 1995" }, { "type": "amended", "affecting": "uksi/1994/2711", "affecting_title": "The Export of Goods (Control) Order 1994 (Amendment No. 3) Order 1994" }, { "type": "amended", "affecting": "uksi/1994/2711", "affecting_title": "The Export of Goods (Control) Order 1994 (Amendment No. 3) Order 1994" }, { "type": "amended", "affecting": "uksi/1995/3249", "affecting_title": "The Export of Goods (Control) (Amendment No. 2) Order 1995" }, { "type": "amended", "affecting": "uksi/1995/3249", "affecting_title": "The Export of Goods (Control) (Amendment No. 2) Order 1995" }, { "type": "amended", "affecting": "uksi/1996/1736", "affecting_title": "The Dual-Use and Related Goods (Export Control) (Amendment No. 2) Regulations 1996" }, { "type": "modified", "affecting": "uksi/1996/2721", "affecting_title": "The Dual-Use and Related Goods (Export Control) Regulations 1996" }, { "type": "word deleted", "affecting": "uksi/2000/2264", "affecting_title": "The Export of Goods (Control) (Amendment No. 5) Order 2000" }, { "type": "words inserted", "affecting": "uksi/2000/2264", "affecting_title": "The Export of Goods (Control) (Amendment No. 5) Order 2000" }, { "type": "rev. in Pt.", "affecting": "uksi/1994/1632", "affecting_title": "The Export of Goods (Control) Order 1994 (Amendment) Order 1994" }, { "type": "rev. in Pt.", "affecting": "uksi/1994/1632", "affecting_title": "The Export of Goods (Control) Order 1994 (Amendment) Order 1994" }, { "type": "amended", "affecting": "uksi/1996/1341", "affecting_title": "The Export of Goods (Control) (Amendment) Order 1996" }, { "type": "amended", "affecting": "uksi/2000/2264", "affecting_title": "The Export of Goods (Control) (Amendment No. 5) Order 2000" }, { "type": "amended", "affecting": "uksi/2000/2140", "affecting_title": "The Export of Goods (Control) (Amendment No. 4) Order 2000" }, { "type": "modified", "affecting": "uksi/1996/1124", "affecting_title": "The Dual-Use and Related Goods (Export Control) (Amendment) Regulations 1996" }, { "type": "amended", "affecting": "uksi/1999/3411", "affecting_title": "The Export of Goods (Control) (Amendment No. 6) Order 1999" }, { "type": "amended", "affecting": "uksi/1997/1008", "affecting_title": "The Export of Goods (Control)(Amendment No. 2) Order 1997" }, { "type": "amended", "affecting": "uksi/1994/2518", "affecting_title": "The Export of Goods (Control) Order 1994 (Amendment No. 2) Order 1994" }, { "type": "am", "affecting": "uksi/2003/1938", "affecting_title": "The Export of Goods (Control) (Amendment) (No. 2) Order 2003" }, { "type": "rev in pt", "affecting": "uksi/2003/1938", "affecting_title": "The Export of Goods (Control) (Amendment) (No. 2) Order 2003" }, { "type": "am", "affecting": "uksi/2003/1938", "affecting_title": "The Export of Goods (Control) (Amendment) (No. 2) Order 2003" }, { "type": "rev in pt", "affecting": "uksi/2003/1938", "affecting_title": "The Export of Goods (Control) (Amendment) (No. 2) Order 2003" }, { "type": "rev in pt", "affecting": "uksi/2002/2059", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2002" }, { "type": "rev", "affecting": "uksi/2002/2059", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2002" }, { "type": "am", "affecting": "uksi/2002/2059", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2002" }, { "type": "subst", "affecting": "uksi/2002/2059", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2002" }, { "type": "am", "affecting": "uksi/2002/2059", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2002" }, { "type": "rev", "affecting": "uksi/2002/2059", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2002" }, { "type": "added", "affecting": "uksi/2002/2059", "affecting_title": "The Export of Goods (Control) (Amendment) Order 2002" } ], "provenance": { "source": "legislation.gov.uk", "source_url": "https://www.legislation.gov.uk/uksi/1994/1191/schedule/1/paragraph/1B", "retrieved_at": "2026-10-29T13:34:05.038647+00:00" }, "licence": "Open Government Licence v3.0", "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/", "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives." }