# The Export of Goods (Control) Order 1994, Paragraph 1E: Equipment, Assemblies and Components


Technology
1E001 Technology required for the development or production of goods specified in heads b. or c. of entry 1A001, or entries 1A002, 1A003, or sub-categories 1B or 1C.
1E002 Other technology:
a. Technology for the development or production of polybenzothiazoles or polybenzoxazoles;
b. Technology for the development or production of fluoroelastomer compounds containing at least one vinylether monomer;
c. Technology for the design or production of the following base materials or non-composite ceramic materials:
1. Base materials having all of the following characteristics:
a. Any of the following compositions:
1. Single or complex oxides of zirconium and complex oxides of silicon or aluminium;
2. Single nitrides of boron (cubic crystalline forms);
3. Single or complex carbides of silicon or boron; or
4. Single or complex nitrides of silicon;
b. Total metallic impurities, excluding intentional additions, of less than:
1. 1,000 ppm for single oxides or carbides; or
2. 5,000 ppm for complex compounds or single nitrides; and
c. 1. Average particle size equal to or less than 5 micrometre and no more than 10% of the particles larger than 10 micrometre; or
Note: For zirconia, these limits are 1 micrometre and 5 micrometre respectively.
2. a. Platelets with a length to thickness ratio exceeding 5;
b. Whiskers with a length to diameter ratio exceeding 10 for diameters less than 2 micrometre; and
c. Continuous or chopped fibres less than 10 micrometre in diameter;
2. Non-composite ceramic materials (except abrasives) composed of the materials described in sub-head c.1. of this entry;
d. Technology for the production of aromatic polyamide fibres;
e. Technology for the installation, maintenance or repair of materials specified in entry 1C001;
f. Technology for the repair of composite structures, laminates or materials specified in entry 1A002 and heads c. or d. of entry 1C007.
Note: Head f. of this entry does not specify technology for the repair of civil aircraft structures using carbon fibrous or filamentary materials and epoxy resins, contained in manufacturers' manuals.
1E101 Technology required for the use of goods specified in entries 1A102, 1B001, 1B101, 1B115, 1B116, 1C001, 1C101, 1C107, 1C115 to 1C117, 1D101 or 1D103.
1E102 Technology required for the development of software specified in entries 1D001, 1D101 or 1D103.
1E103 Technology for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves, when used for the production of composites or partially processed composites.
1E104 Technology relating to the production of pyrolitically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1,573 K (1,300°C) to 3,173 K (2,900°C) temperature range at pressures of 130 Pa to 20 kPa.Note: This entry includes technology for the composition of precursor gases, flowrates and process control schedules and parameters.
1E201 Technology required for the use of goods specified in entries 1A002, 1A202, 1A225 to 1A227, 1B201, 1B225 to 1B231, sub-heads a.2.c. and a.2.d. of entry 1C002, head b. of entry 1C010, or entries 1C202, 1C210, 1C216, 1C225 to 1C239 or 1D201.
1E202 Technology required for the development or production of goods specified in entries 1A202, 1A225 to 1A227.
1E203 Technology required for the development of software specified in entry 1D201.

---
Source: https://www.legislation.gov.uk/uksi/1994/1191/schedule/1/paragraph/1E (the official version)
Page: https://openlegislation.uk/export-of-goods-control-order-1994/schedule-1/paragraph-1E
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.