# The Export of Goods, Transfer of Technology and Provision of Technical Assistance (Control) (Amendment) (No. 2) Order 2008, Article 2: Amendments


(1) In Schedule 1 to the 2003 Order—
(a) in paragraph g. of the note to entry ML1, after “processing” insert “(ie, using only lenses to view the target)”;
(b) renumber the note to entry ML2 as “Note 1” and immediately after it insert—
“Note 2: ML2.a. does not apply to hand-held projectile launchers specially designed to launch tethered projectiles, having no high explosive charge or communications link, to a range of 500m or less.”;
(c) after entry ML6, insert a new entry PL5035 as follows—
“Components that are both specially designed to provide ballistic protection and specially designed or modified for “vehicles” specified in ML6.b.
N.B.: See also ML13.a. for armoured plate.”;
(d) in entry ML7, for “N.B.” where it first appears substitute “Note”;
(e) in entry ML7.e., after “military use” insert “, designed or modified”;
(f) in entry ML7.f.—
(i) for “and specially designed components therefor, and specially formulated chemical mixtures as follows:” substitute “components and chemical mixtures as follows:”;
(ii) in paragraphs 1. and 2., omit “specially” where it first appears;
(g) in entry ML7.g.,after “military use,” insert “designed or modified”;
(h) immediately before the note to entry ML7.g., insert—
“N.B.: See also 1A in Annex I to “the Regulation”.”;
(i) in entry ML8, for “N.B.” where it first appears substitute “Note”;
(j) insert the following technical note to ML17.e.3. immediately after it—
“Technical Note:
Electro-magnetic pulse does not refer to unintentional interference caused by electromagnetic radiation from nearby equipment (eg, machinery, appliances or electronics) or lightning.”;
(k) in entry ML21.b.4., after ““Software”” insert “that is both specially designed for military use and”;
(l) in entry PL5001.e., for “specifically” substitute “specially”;
(m) in entry PL8001.a., after “1A005,” insert “1A006, 1A007,”;
(n) immediately before the note to entry PL8001.a.3., insert—
“N.B.: See also 1A007, 3A229 and 3A232 in Annex I to “the Regulation”.”;
(o) immediately before the note to entry PL8001.a.4., insert—
“N.B.: See also 1A005 and 1A006 in Annex I to “the Regulation”.”.
(2) In Schedule 5 to the 2003 Order, for “Council Regulation (EC) No. 1183/2007 of 18 September 2007 (O.J. L 278, 22.10.2007, p.1).” substitute “Council Regulation (EC) No. 1167/2008 of 24 October 2008 (O.J. L 325, 3.12.2008, p.1).”.
(3) References in—
(a) the Trade in Goods (Control) Order 2003, and
(b) the Trade in Controlled Goods (Embargoed Destinations) Order 2004
to Schedule 1 to the 2003 Order shall be construed as references to that Schedule as amended by this Order.

---
Source: https://www.legislation.gov.uk/uksi/2008/3161/article/2 (the official version)
Page: https://openlegislation.uk/export-of-goods-transfer-of-technology-and-provision-of-technical-assistance-control-amendment-no-2-order-2008/article-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.