{
  "url": "https://openlegislation.uk/fertilisers-regulations-northern-ireland-1992/schedule-1/paragraph-8",
  "json_url": "https://openlegislation.uk/fertilisers-regulations-northern-ireland-1992/schedule-1/paragraph-8.json",
  "legislation": "nisr/1992/187",
  "legislation_title": "The Fertilisers Regulations (Northern Ireland) 1992",
  "legislation_url": "https://openlegislation.uk/fertilisers-regulations-northern-ireland-1992",
  "path": "schedule/1/paragraph/8",
  "kind": "paragraph",
  "number": "8",
  "heading": "Limits of variation",
  "text": "The limits of variation for trace elements and secondary nutrients other than where prescribed in Sections D and E of the following table shall be:\n(i) trace elements — up to one-fifth of the declared value for a trace element content not exceeding 2% and 0.4% in absolute terms for a content of more than 2%;\n(ii) secondary nutrients in the oxide form - up to a quarter of the declared value for a secondary nutrient content not exceeding 3.6% and 0.9% in absolute terms for a content of more than 3.6%. This is equivalent to the following maxima for the elemental forms—\n0.64% maximum for Ca\n0.55% maximum for Mg\n0.67% maximum for Na\n0.36% maximum for S.\nSECTION A:\nSTRAIGHT FERTILISERS\nGroup\nName of Material\nMeaning\nDeclarations\nLimits of variation (absolute value in percentage by weight, except where otherwise specified)\n1\n2\n3\n4\n5\nThis is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement.\nThis is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement.\nThis is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement.\nThis is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement.\n1(a)\nAmmonium nitrate\nChemically obtained product containing ammonium nitrate as its essential ingredient, and possibly fillers such as ground limestone, calcium sulphate, ground dolomite, magnesium sulphate and kieserite.The nitrogen (N) content must be not less than 20%, and the nitric nitrogen and ammoniacal nitrogen fractions should each account for about half the nitrogen present.\nIf the product is designated as an EEC fertiliser and contains more than 28% by weight of nitrogen (N) it shall have the following additional characteristics (all the percentages specified being by weight):\n(i) It shall not contain any inorganic additive or inert substance other than those named above which might increase the product’s sensitivity to heat or its tendency to detonate. Heavy metals must not be added deliberately, and any traces which are incidental to the production process must not, by their presence, increase the product’s sensitivity to heat or its tendency to detonate.\n(ii) The oil retention of the product, which must first have undergone two thermal cycles of a temperature ranging from 25° to 50°C, must not exceed 4%.\n(iii) The percentage of combustible material, measured as carbon, must not in the case of a product containing 31.5% or more of nitrogen exceed 0.2%, and must not in the case of a product containing between 28% and 31.5% of nitrogen exceed 0.4%.\n(iv) A solution of 10 grams of the product in 100 millilitres of water must have a pH of at least 4.5.\n(v) Not more than 5% of the product must be capable of passing through a 1 millimetre mesh sieve, and not more than 3% through a 0.5 millimetre mesh sieve.\n(vi) The chlorine content must not exceed 0.02%.\n(vii) The copper content shall not exceed 10 mg/kg.\nAmount of total nitrogen\n0.8 (for declarations up to and including 32% N)\n0.6 (for declarations exceeding 32% N)\nAmount of nitric nitrogen Amount of ammoniacal nitrogen\n} As set out in paragraph 7(a) of this Schedule\nCalcium ammonium nitrate\nChemically obtained product containing ammonium nitrate as its essential ingredient.The nitrogen (N) content must be not less than 20%, and the nitric nitrogen and ammoniacal nitrogen fractions should each account for about half the nitrogen present. The product may contain, in addition to ammonium nitrate, only calcium carbonate (limestone) and/or magnesium carbonate and calcium carbonate (dolomite). The minimum content of these carbonates must be 20% and their purity level not less than 90%.\nAmount of total nitrogen\n0.8\nAmount of nitric nitrogen Amount of ammoniacal nitrogen\n} As set out in paragraph 7(a) of this Schedule\nAmmonium sulphate-nitrate\nChemically obtained product with ammonium nitrate and ammonium sulphate as essential ingredients, and containing not less than 25% ammoniacal and nitric nitrogen (N) with a minimum nitric nitrogen content of 5 %.\nAmount of total nitrogen\n0.8\nAmount of nitric nitrogen\nAmount of ammoniacal nitrogen\n} As set out in paragraph 7(a) of this Schedule\nCalcium cyanamide\nChemically obtained product with calcium cyanamide as its essential ingredient, calcium oxide and possibly small quantities of ammonium salts and urea, and containing not less than 18% total nitrogen (N), at least 75% of the declared nitrogen being bound in the form of cyanamide.\nAmount of total nitrogen\n1.0\nCalcium magnesium nitrate\nChemically obtained product with calcium nitrate and magnesium nitrate as essential ingredients, containing not less than 13% nitric nitrogen (N), and not less than 5% magnesium, expressed as MgO, in the form of water-soluble salts.\nAmount of nitric nitrogen\n0.4\nNitrate of lime and magnesium\nAmount of magnesium oxide soluble in water\n0.9\nCalcium nitrate\nChemically obtained product containing calcium nitrate as its essential ingredient and possibly ammonium nitrate, and containing not less than 15% total nitrogen (N), with a maximum ammoniacal nitrogen content of 1.5%.\nAmount of total nitrogen\n0.4\nNitrate of lime\nOptional declarations\nAmount of nitric nitrogen\nAmount of ammoniacal nitrogen\n} As set out in paragraph 7(a) of this Schedule\nChile nitrate\nProduct prepared from caliche, with sodium nitrate as its essential ingredient, and containing at least 15% nitric nitrogen (N).\nAmount of nitric nitrogen\n0.4\nMagnesium ammonium nitrate\nChemically obtained product with ammonium nitrate and magnesium compound salts (dolomite magnesium carbonate and/or magnesium sulphate) as essential ingredients and containing not less than 19% ammoniacal and nitric nitrogen (N) (with a minimum nitric nitrogen content of 6%) and not less than 5% magnesium expressed as total MgO.\nAmount of total nitrogen\n0.8\nAmount of ammoniacal nitrogen\n} As set out in paragraph 7(a) of this Schedule\nAmount of nitric nitrogen\nAmount of total magnesium oxide\n0.9\nOptional declarations\nAmount of magnesium oxide soluble in water\n0.9\nMagnesium sulphonitrate\nChemically obtained product with ammonium nitrate, ammonium sulphate and magnesium sulphate as essential ingredients, and containing not less than 19% ammoniacal and nitric nitrogen (N), with a minimum nitric nitrogen content of 6%, and not less than 5% magnesium expressed as MgO in the form of water-soluble salts.\nAmount of total nitrogen\n0.8\nAmount of ammoniacal nitrogen\n} As set out in paragraph 7(a) of this Schedule\nAmount of nitric nitrogen\nAmount of magnesium oxide soluble in water\n0.9\nNitrogenous calcium cyanamide\nChemically obtained product with calcium cyanamide as its essential ingredient, calcium oxide and possibly small quantities of ammonium salts and urea plus added nitrate, and containing not less than 18% total nitrogen (N), at least 75% of the declared non-nitric nitrogen being bound in the form of cyanamide.The nitric nitrogen content must be not less than 1% and not greater than 3%.\nAmount of total nitrogen\n1.0\nAmount of nitric nitrogen\nAs set out in paragraph 7(a) of this Schedule\nSodium nitrate\nChemically obtained product with sodium nitrate as its essential ingredient and containing not less than 15% nitric nitrogen (N).\nAmount of nitric nitrogen\n0.4\nNitrate of soda\nSulphate of ammonia\nChemically obtained product with ammonium sulphate as its essential ingredient, and containing not less than 20% ammoniacal nitrogen (N).\nAmount of ammoniacal nitrogen\n0.3\nUrea\nChemically obtained product with carbonyl diamide (carbamide) as its essential ingredient, and containing not less than 44% total ureic nitrogen (N) (including biuret), with a maximum biuret content of 1.2%.\nAmount of ureic nitrogen\n0.4\n1(b)\nStraight nitrogenous fertilisers named in accordance with Regulation 4(3)\nAny straight nitrogenous fertiliser not otherwise specified in this table.\nAmount of total nitrogen\n0.8\n1(c)\nNitrogenous fertiliser.In addition the source materials shall be indicated in parentheses in descending order of nutrient contribution\nProduct obtained by mixing or blending two or more of the fertilisers listed in Groups 1(a), 1(b) and 4(a) of Section A of this table.\nAmount of total nitrogen\n0.5 (for declarations up to and including 10% N)\n0.8 (for declarations exceeding 10% N and up to and including 15% N)\n1.1 (for declarations exceeding 15% N)\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nAs set out in paragraph 7(b) of this Schedule\n2(a)\nAluminium — calcium phosphate\nProduct obtained in amorphous form by heat treatment and grinding, with aluminium and calcium phosphates as essential ingredients, and containing not less than 30% total phosphorus pentoxide (P2O5) (soluble in mineral acids), at least 75% of the declared total phosphorus pentoxide being soluble in alkaline ammonium citrate (Joulie).Not less than 90% of the material should be able to pass through a sieve with a mesh of 0.160mm and not less than 98% through a sieve with a mesh of 0.630mm.\nAmount of total phosphorus pentoxide\n0.8\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\n0.8\nBasic slag\nProduct obtained in iron-smelting by treatment of the phosphorus melts and with calcium silicophosphates as essential ingredients, containing not less than 12% total phosphorus pentoxide (P2O5) (soluble in mineral acids) at least 75% of the declared total phosphorus pentoxide being soluble in 2% citric acid.Not less than 75% of the material should be able to pass through a sieve with a mesh of 0.160mm and not less than 96% through a sieve with a mesh of 0.630mm.\nAmount of total phosphorus pentoxide\n1.0\nThomas phosphates\nAmount of phosphorus pentoxide soluble in 2% citric acid\nAs set out in paragraph 7(a) of this Schedule\nThomas slag\nNo limits of variation are permitted when the declaration is expressed as a range of 2% by weight\nCalcined phosphate\nProduct obtained by heat treatment of ground rock phosphate with alkaline compounds and silicic acid, with alkaline calcium phosphate and calcium silicate as essential ingredients, and containing not less than 25% phosphorus pentoxide (P2O5) soluble in alkaline ammonium citrate (Petermann).Not less than 75% of the material should be able to pass through a sieve with a mesh of 0.160mm and not less than 96% through a sieve with a mesh of 0.630mm.\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\n0.8\nDicalcium phosphate\nProduct obtained by precipitation of solubilised phosphoric acid from mineral phosphates or bones, with dicalcium phosphate dihydrate as its essential ingredient, and containing not less than 38% phosphorus pentoxide (P2O5) soluble in alkaline ammonium citrate (Petermann). Not less than 90% of the material should be able to pass through a sieve with a mesh of 0.160mm and not less than 98% through a sieve with a mesh of 0.630mm.\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\n0.8\nPartially solubilised rock phosphate\nProduct obtained by partial solubilisation of ground rock phosphate with sulphuric acid or phosphoric acid, with monocalcium phosphate, tricalcium phosphate and calcium sulphate as essential ingredients, and containing not less than 20% total phosphorus pentoxide (P2O5) (soluble in mineral acids), at least 40% of the declared total phosphorus pentoxide being soluble in water. Not less than 90% of the material should be able to pass through a sieve with a mesh of 0.160mm and not less than 98% through a sieve with a mesh of 0.630mm.\nAmount of total phosphorus pentoxide\n0.8\nAmount of phosphorus pentoxide soluble in water\n0.9\nSoft ground rock phosphate\nProduct obtained by grinding soft mineral phosphates with tricalcium phosphate and calcium carbonate as essential ingredients and containing not less than 25% total phosphorus pentoxide (P2O5) (soluble in mineral acids), at least 55% of the declared total phosphorus pentoxide being soluble in 2% formic acid.Not less than 90% of the material should be able to pass through a sieve with a mesh of 0.063mm and not less than 99% through a sieve with a mesh of 0.125mm.\nAmount of total phosphorus pentoxide\n0.8\nAmount of phosphorus pentoxide soluble in 2% formic acid\n0.8\nAmount of material as a percentage by weight that will pass through a sieve with a mesh of 0.063mm\n5.0% of amount stated\nNormal super-phosphate\nProduct obtained by reaction of ground mineral phosphate with sulphuric acid, with monocalcium phosphate as an essential ingredient as well as calcium sulphate, and containing not less than 16% phosphorus pentoxide (P2O5) soluble in neutral ammonium citrate, at least 93% of the declared phosphorus pentoxide soluble in neutral ammonium citrate being soluble in water.\nAmount of phosphorus pentoxide soluble in neutral ammonium citrate\n0.8\nAmount of phosphorus pentoxide soluble in water\n0.9\nConcentrated super-phosphate\nProduct obtained by reaction of ground mineral phosphate with sulphuric acid and phosphoric acid, with monocalcium phosphate as an essential ingredient as well as calcium sulphate, and containing not less than 25% phosphorus pentoxide (P2O5) soluble in neutral ammonium citrate, at least 93% of the declared phosphorus pentoxide soluble in neutral ammonium citrate being soluble in water.\nAmount of phosphorus pentoxide soluble in neutral ammonium citrate\n0.8\nAmount of phosphorus pentoxide soluble in water\n0.9\nTriple super-phosphate\nProduct obtained by reaction of ground mineral phosphate with phosphoric acid, with monocalcium phosphate as its essential ingredient, and containing not less than 38% phosphorus pentoxide (P2O5) soluble in neutral ammonium citrate, at least 93% of the declared phosphorus pentoxide soluble in neutral ammonium citrate being soluble in water.\nAmount of phosphorus pentoxide soluble in neutral ammonium citrate\n0.8\nAmount of phosphorus pentoxide soluble in water\n1.3\n2(b)\nPhosphatic neutral filter cake\nProduct obtained in detergent manufacture by treatment of phosphate rock with sulphuric acid and extraction of the soluble phosphates from the resulting precipitate, and containing not less than 20% total phosphorus pentoxide (P2O5) (soluble in mineral acids).\nAmount of total phosphorus pentoxide\n1.0\nAmount of phosphorus pentoxide soluble in 2% citric acid\n1.0\nPhosphated slag\nProduct obtained by blending low grade basic slag and phosphate rock and containing not less than 16% total phosphorus pentoxide (P2O5) (soluble in mineral acids).\nAmount of total phosphorus pentoxide\n0.8\nAmount of phosphorus pentoxide soluble in 2% formic acid\n0.8\nBasic slag medium concentration\nProduct obtained in iron smelting by treatment of phosphorus melts with calcium silicophosphates as essential ingredients and containing not less than 5% total phosphorus pentoxide (P2O5) (soluble in mineral acids), at least 75% of the declared total phosphorus pentoxide being soluble in 2% citric acid. Not less than 75% of the material should be able to pass through a sieve with a mesh of 0.160mm and not less than 96% through a sieve with a mesh of 0.630mm.\nAmount of total phosphorus pentoxide\n1.0\nAmount of phosphorus pentoxide soluble in 2% citric acid\n0.8\nNo limits of variation are permitted when the declaration is expressed as a range of 2% by weight\nGranular basic slag\nProduct obtained in iron smelting by treatment of phosphorus melts with calcium silicophosphates as essential ingredients, and containing not less than 5% total phosphorus pentoxide (P2O5) (soluble in mineral acids), at least 75% of the declared total phosphorus pentoxide being soluble in 2% citric acid after the sample has been ground to pass through a sieve with a mesh of 0.160mm.Not less than 70% of the material should be able to pass through a sieve with a mesh of 0.630mm and not more than 12% through a sieve with a mesh of 0.160mm.\nAmount of total phosphorus pentoxide\n1.0\nAmount of phosphorus pentoxide soluble in 2% citric acid\n0.8\nNo limits of variation are permitted when the declaration is expressed as a range of 2% by weight\nRock phosphate\nProduct not otherwise specified in this table obtained from mineral calcium phosphate deposits, to which no other matter has been added and containing not less than 5% total phosphorus pentoxide (P2O5) (soluble in mineral acids).\nAmount of total phosphorus pentoxide\n0.8\nAmount of phosphorus pentoxide soluble in 2% formic acid\n0.8\nAmount of material as a percentage by weight that will pass through a sieve with a mesh of 0.150mm\n5.0% of amount stated\n2(c)\nStraight phosphatic fertilisers named in accordance with Regulation 4(3)\nAny straight phosphatic fertiliser not otherwise specified in this table.\nAmount of total phosphorus pentoxide\n0.9\n2(d)\nPhosphatic fertiliser\nIn addition the source materials shall be indicated in parentheses in descending order of nutrient contribution\nProduct obtained by mixing or blending two or more of the fertilisers listed in Groups 2(a), 2(b), 2(c) and 4(b) of Section A of this table.\nAmount of total phosphorus pentoxide\n0.5 (for declarations up to and including 10% P2O5)\n0.8 (for declarations exceeding 10% P2O5 and up to and including 15% P2O5)\n1.1 (for declarations exceeding 15% P2O5)\nAmount of phosphorus pentoxide soluble in 2% formic acid\n0.8\n3(a)\nEnriched Kainit salt\nIn addition usual trading names may be given\nProduct obtained from crude potassium salts, enriched by blending with potassium chloride, and containing not less than 18% water-soluble potassium oxide (K2O).\nAmount of potassium oxide soluble in water\n1.0\nOptional declarations\nAmount of magnesium oxide soluble in water where this is greater than 5%\n0.9\nKainit\nIn addition usual trading names may be given\nProduct obtained from crude potassium salts, and containing not less than 10% water-soluble potassium oxide (K2O), and not less than 5% magnesium oxide (MgO) in the form of water-soluble salts.\nAmount of potassium oxide soluble in water\n1.5\nAmount of magnesium oxide soluble in water\n0.9\nMuriate of potash\nIn addition usual trading names may be given\nProduct obtained from crude potassium salts with potassium chloride as its essential ingredient, and containing not less than 37% water-soluble potassium oxide (K2O).\nAmount of potassium oxide soluble in water\n1.0 (for declarations up to and including 55% K2O)\n0.5 (for declarations exceeding 55% K2O)\nPotassium chloride containing magnesium salt\nProduct obtained from crude potassium salts with added magnesium salts, with potassium chloride and magnesium salts as essential ingredients, and containing not less than 37% water-soluble potassium oxide (K2O) and not less than 5% magnesium oxide (MgO) in the form of water-soluble salts.\nAmount of potassium oxide soluble in water\n1.5\nAmount of magnesium oxide soluble in water\n0.9\nSulphate of potash\nProduct obtained chemically from potassium salts, with potassium sulphate as its essential ingredient, and containing not less than 47% water-soluble potassium oxide (K2O) with a maximum chlorine (Cl) content of 3%.\nAmount of potassium oxide soluble in water\n0.5\nOptional declarations\nAmount of chlorine where this is lower than 3%\n0.2\nSulphate of potash containing magnesium salt\nIn addition usual trading names may be given\nProduct obtained chemically from potassium salts with possible addition of magnesium salts, with potassium sulphate and magnesium sulphate as essential ingredients, and containing not less than 22% water-soluble potassium oxide (K2O) and not less than 8% magnesium oxide (MgO) in the form of water-soluble salts, with a maximum chlorine content of 3%.\nAmount of potassium oxide soluble in water\n1.5\nAmount of magnesium oxide soluble in water\n0.9\nOptional declarations\nAmount of chlorine where this is lower than 3%\n0.2\nKieserite with potassium sulphate\nIn addition usual trading names may be given\nProduct obtained from Kieserite with potassium sulphate added and containing not less than 6% water-soluble potassium oxide (K2O) and not less than 8% magnesium oxide (MgO) in the form of water-soluble salts, where the two together are not less than 20%, with a maximum chlorine content of 3%.\nAmount of potassium oxide soluble in water\n1.5\nAmount of magnesium oxide soluble in water\n0.9\nOptional declarations\nAmount of chlorine where this is lower than 3%\n0.2\n3(b)\nNitrate of potash\nPotassium nitrate for fertilising purposes.\nAmount of total nitrogen\n0.5\nAmount of total potassium oxide\n2.0\nPotassic basic slag\nA mixture of basic slag and muriate or sulphate of potash containing not less than 5% total phosphorus pentoxide (P2O5) (soluble in mineral acids) and not less than 5% total potassium oxide (K2O), at least 75% of the declared total phosphorus pentoxide being soluble in 2% citric acid.\nAmount of total phosphorus pentoxide\n1.0\nAmount of phosphorus pentoxide soluble in 2% citric acid\n1.0\nAmount of total potassium oxide\n1.0 (for declarations up to and including 15% K2O)\n2.0 (for declarations exceeding 15% K2O)\nAmount of slag as a percentage by weight that will pass through a sieve with a mesh of 0.5mm\n5.0% of amount stated\nPotassic nitrate of soda\nA mixture of sodium nitrate and potassium nitrate for fertilising purposes.\nAmount of total nitrogen\n0.5\nChilean potash nitrate\nAmount of total potassium oxide\n0.8\n3(c)\nStraight potassic fertilisers named in accordance with Regulation 4(3)\nAny straight potassic fertiliser not otherwise specified in this table.\nAmount of total potassium oxide\n1.0\n3(d)\nPotassic fertiliser\nIn addition the source material shall be indicated in parentheses in descending order of nutrient contribution\nProduct obtained by mixing or blending two or more of the fertilisers listed in Groups 3(a), 3(b) and 3(c) of Section A of this table.\nAmount of total potassium oxide\n0.5 (for declarations up to and including 10% K2O)\n0.8 (for declarations exceeding 10% and up to and including 15% K2O)\n1.1 (for declarations exceeding 15% K2O)\n4(a)\nCastor meal\nThe residue which is obtained by the removal of oil from commercially pure castor seed.\nAmount of total nitrogen\n0.5\nDried blood\nBlood which has been dried, to which no other matter has been added, and which is used for fertilising purposes, containing not less than 11% total nitrogen.\nAmount of total nitrogen\n0.5\nHoofs\nThe product obtained by crushing or grinding hoof, to which no other matter has been added, containing not less than 12% total nitrogen.\nAmount of total nitrogen\n0.5\nHoofs and horns\nA mixture of hoof and horn, crushed or ground, to which no other matter has been added, containing not less than 12% total nitrogen.\nAmount of total nitrogen\n0.5\nHorns\nThe product obtained by crushing or grinding horn, to which no other matter has been added, containing not less than 12% total nitrogen.\nAmount of total nitrogen\n0.5\nOilseed fertiliser\nProduct obtained by the removal of oil from seeds not otherwise specified in this table (excluding mowrah meal) and used for fertilising purposes.\nAmount of total nitrogen\n0.5\n4(b)\nRape meal\nThe residue which is obtained by the removal of oil from commercially pure rape seed.\nAmount of total nitrogen\n0.5\nPrecipitated bone phosphate\nAn insoluble calcium phosphate prepared by treating commercially pure bone with acid and precipitation of phosphate from the solution.\nAmount of phosphorus pentoxide soluble in citric acid\n1.0\nDicalcium bone phosphate\n4(c)\nBone meal\nCommercially pure bone, raw or degreased, which has been ground or crushed, of which not less than 90% will pass through a sieve of 6.7mm square apertures.\nAmount of total nitrogen\n0.5\nAmount of total phosphorus pentoxide\n1.5\nFish guano\nProduct obtained by drying and grinding or otherwise treating fish or fish waste, to which no other matter has been added.\nAmount of total nitrogen\n0.5\nFish manure\nAmount of total phosphorus pentoxide\n1.0\nMeat and bone meal\nThe product of drying and grinding or otherwise treating bone, flesh, fibre and other slaughterhouse residues, to which no other matter has been added.\nAmount of total nitrogen\n0.5\nMeat meal\nAmount of total phosphorus pentoxide\n1.0\nMeat and bone tankage\nCarcase meal\nRaw guano\nThe excrement and remains of any birds, except poultry, containing both nitrogen and phosphorus, prepared for use by screening where necessary, to which no addition has been made.\nAmount of total nitrogen\n20.0% of amount stated (with a minimum of 0.25 and a maximum of 1.5)\nAmount of total phosphorus pentoxide\n10.0% of amount stated (with a maximum of 2.0)\nAmount of total potassium oxide\n20.0% of amount stated\nShoddy manure\nWaste of wool, or of wool mixed with fibrous materials such as are associated with wool in the textile industries including cotton and similar non-wool materials, to which no other matter has been added, the fibre content of which contains not less than 50% of wool by weight.\nNone\nNone\nWool waste\nWool combings\nWool manure\nFlock dust\nSteamed bone flour\nCommercially pure bone, degreased and ground or crushed, from which the nitrogen has been partly or wholly removed by steam, of which not less than 75% will pass through a British Standard Test Sieve No. 16.\nAmount of total nitrogen\n0.5\nAmount of total phosphorus pentoxide\n1.0\nSteamed bone meal\nCommercially pure bone, degreased and ground or crushed, from which the nitrogen has been partly or wholly removed by steam, of which not less than 90% will pass through a sieve of 6.7mm square aperture.\nAmount of total nitrogen\n0.5\nAmount of total phosphorus pentoxide\n1.0\n5(a)\nGround burnt lime\nCommercial calcium oxide containing not more than 27% magnesium as MgO and of which 100% will pass through a sieve of 6.3mm.\nNeutralising value\n5.0% of amount stated\nKibbled burnt lime\nCommercial calcium oxide containing not more than 27% magnesium as MgO and of which 100% will pass through a sieve of 45mm.\nNeutralising value\n5.0% of amount stated\nBurnt lime\nCommercial calcium oxide containing not more than 27% magnesium as MgO.\nNeutralising value\n5.0% of amount stated\nMagnesian ground burnt lime\nCommercial oxide obtained from magnesian limestone containing more than 27% magnesium expressed as MgO and of which 100% will pass through a sieve of 6.3mm.\nNeutralising value\n5.0% of amount stated\nMagnesian kibbled burnt lime\nCommercial oxide obtained from magnesian limestone containing more than 27% magnesium expressed as MgO and of which 100% will pass through a sieve of 45mm.\nNeutralising value\n5.0% of amount stated\nMagnesian burnt lime\nCommercial oxide obtained from magnesian limestone containing more than 27% magnesium as MgO.\nNeutralising value\n5.0% of amount stated\nChalk\nCretaceous limestone.\nNeutralising value\n5.0% of amount stated\nGround chalk\nCretaceous limestone of which 98% will pass through a sieve of 6.3mm.\nNeutralising value\n5.0% of amount stated\nScreened chalk\nCretaceous limestone of which 98% will pass through a sieve of 45mm.\nNeutralising value\n5.0% of amount stated\nHydrated lime\nProduct obtained by slaking burnt lime or magnesian burnt lime of which not less than 95% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nGround limestone\nSedimentary rock consisting largely of calcium carbonate and containing not more than 15% of magnesium expressed as MgO and of which 100% will pass through a sieve of 5mm, not less than 95% will pass through a sieve of 3.35mm and not less than 40% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n>5.0% of amount stated\nScreened limestone\nSedimentary rock consisting largely of calcium carbonate and containing not more than 15% of magnesium expressed as MgO and of which 100% will pass through a sieve of 5mm, not less than 95% will pass through a sieve of 3.35mm and not less than 20% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nLimestone dust\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n5.0% of amount stated\nCoarse screened limestone\nSedimentary rock consisting largely of calcium carbonate and containing not more than 15% of magnesium expressed as MgO and of which 100% will pass through a sieve of 5mm, not less than 90% will pass through a sieve of 3.35mm and not less than 15% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nCoarse limestone dust\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n5.0% of amount stated\nMagnesian ground limestone\nSedimentary rock consisting largely of calcium and magnesium carbonates and containing not less than 15% of magnesium as MgO and of which 100% will pass through a sieve of 5mm, not less than 95% will pass through a sieve of 3.35mm and not less than 40% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n5.0% of amount stated\nMagnesian screened limestone\nSedimentary rock consisting largely of calcium and magnesium carbonates and containing not less than 15% of magnesium as MgO and of which 100% will pass through a sieve of 5mm, not less than 95% will pass through a sieve of 3.35mm and not less than 20% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n5.0% of amount stated\nCoarse magnesian screened limestone\nSedimentary rock consisting largely of calcium and magnesium carbonates and containing not less than 15% of magnesium as MgO and of which 100% will pass through a sieve of 5mm, not less than 90% will pass through a sieve of 3.35mm and not less than 15% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nCoarse magnesian limestone dust\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n5.0% of amount stated\nPulverised shells\nPulverised calcareous sea shells of which 100% will pass through a sieve with a mesh of 6.3mm.\nNeutralising value\n5.0% of amount stated\nShell sand\nCalcareous sea sand of which 100% will pass through a sieve with a mesh of 6.3mm.\nNeutralising value\n5.0% of amount stated\nMixed lime\nA product resulting from mixing two or more forms of liming material specified in this schedule not being materials for which there is no minimum standard laid down in column 3 of this schedule or material produced during the manufacture of commercial burnt lime or hydrated lime.\nNeutralising value\n5.0% of amount stated\nAmount of material as a percentage by weight that will pass through a sieve with a mesh of 6.3mm\n5.0% of amount stated\nFurnace slag\nThe unamended by-product of iron manufacture which has been reduced in size so that 100% will pass through a sieve with a mesh of 5mm, not less than 95% will pass through a sieve with a mesh of 3.35mm, and not less than 40% will pass through a 150 micron sieve.\nNeutralising value\n5.0% of amount stated\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n5.0% of amount stated\n5(b)\nLiming material named in accordance with Regulation 4(3)\nAny liming material not otherwise specified in Group 5(a) of Section A of this table and not injurious to plants or soil.\nNeutralising value\n5.0% of amount stated\nAmount of material as a percentage by weight that will pass through a sieve with a mesh of 5mm\n5.0%of amount stated\nAmount of material as a percentage by weight that will pass through a sieve with a mesh of 3.35mm\n5.0% of amount stated\nAmount of material as a percentage by weight that will pass through a 150 micron sieve\n5.0% of amount stated\nSECTION B:\nCOMPOUND FERTILISERS\nGroup\nName of Material\nMeaning\nDeclarations\nLimits of variation (absolute value in percnetage by weight, except where otherwise specified)\n1\n2\n3\n4\n5\n6\n* As determined by the Petermann method.\n* This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement.\n1\nNPK fertiliser\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5);\n3 Not less than 5% potassium oxide (K2O).\nThe sum of the three nutrients must be not less than 20% by weight. The product must not contain basic slag, Thomas phosphate, Thomas slag, calcined phosphate, aluminium-calcium phosphate, soft ground rock phosphate, or partially solubilised rock phosphate.\nThe P2O5 content soluble only in mineral acids must not exceed 2%.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\nPhosphorus Pentoxide (P2O5)\nWhere phosphorus pentoxide soluble in water is less than 2%, amount of:–\n1 Phosphorus pentoxide soluble in neutral ammonium citrate\nWhere phosphorus pentoxide soluble in water is equal to or greater than 2%, amount of:\n1 Phosphorus pentoxide soluble in neutral ammonium citrate and in water\nP2O5 1.1\nP2O5 0.5\n2 Phosphorus pentoxide soluble in water\nAs set out in paragraph 7(a) of this Schedule\nPotassium oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.9\n+P2O5 1.9\n+K2O 1.9\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nCl 0.2\nNPK fertiliser containing aluminium-calcium phosphate\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nigrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5) of which at least 2% must be soluble in water, and at least 5% soluble in mineral acids; and\n3 Not less than 5% potassium oxide (K2O).\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\nThe sum of the three nutrients must be not less than 20% by weight. At least 75% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in alkaline ammonium citrate (Joule). The product must not contain basic slag, Thomas Phosphate, Thomas slag, calcined phosphate, soft ground rock phosphate or partially solubilised rock phosphate, and not less than 90% of the aluminium-calcium phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in water\nAs set out in paragraph 7(a) of this Schedule\nAmount of phosphorus pentoxide soluble in mineral acids (after deduction of the amount of phosphorus pentoxide soluble in water)\nAs set out in paragraph 7(a) of this Schedule\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nAs set out in paragraph 7(a) of this Schedule\nPotassium Oxide (K2O)\nK2 1.1\nK2O 0.5\nAmount of potassium oxide soluble in water\nN 1.9\n+P2O5 1.9\n+K2O 1.9\nOptional declarations\nAmount of chlorine\nCl 0.2\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nNPK fertiliser containing soft ground rock phosphate\nNPK fertiliser containing partially solubilised rock phosphate\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nigrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5) of which at least 2% should be soluble only in mineral acids, at least 5% soluble in neutral ammonium citrate and in water and at least 2.5% soluble in water;\n3 Not less than 5% potassium oxide (K2O).\nThe sum of the three nutrients must be not less than 20% by weight. Neither product must contain basic slag, Thomas phosphate, Thomas slag, calcined phosphate or aluminium-calcium phosphate. Not less than 90% of the soft ground rock phosphate should be able to pass through a sieve with a mesh of 0.063 mm, and not less than 90% of the partially solubilised rock phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in water\nAmount of phosphorus pentoxide soluble in neutral ammonium citrate and in water\nAs set out in paragraph 7(a) of this Schedule\nAmount of phosphorus pentoxide soluble only in mineral acids\nAs set out in paragraph 7(a) of this Schedule\nK2O 0.5\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.9\n+p2O5 1.9\n+K2O 1.9\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nCl 0.2\nNPK fertiliser (Phosphate ingredient, aluminium-calcium phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5);\n3 Not less than 5% potassium oxide (K2O)\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\nThe sum of the three nutrients must be not less than 20% by weight. At least 75% of the declared phsophorus pentoxide soluble in mineral acids must be soluble in alkaline ammonium citrate (Joule). The product must not contain any phosphate material other than aluminium-calcium phosphate and not less than 90% of the aluminium-calcium phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nAs set out in paragraph 7(a) of this Schedule\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.9\n+P2O5 1.9\n+K2O 1.9\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nCl 0.2\nNPK fertiliser (Phosphate ingredient, calcined phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegatable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less t;han 5% phosphorus pentoxide (P2O5);\n3 Not less than 5% potassium oxide (K2O).\nThe sum of the three nutrients must be not less than 20% by weight. The product must not contain any phposphate material other than calcined phosphate. Not less than 75% of the calcined phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nP2O5 1.1\nP2O5 0.5\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.9\n+P2 1.9\n+K2O 1.9\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine may be made”.\nCl 0.2\nNPK fertiliser (Phosphate ingredient, soft ground rock phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:—\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5);\n3 Not less than 5% potassium oxide (K2O).\nThe sum of the three nutrients must be not less than 20% by weight. At least 55% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in 2% formic acid. The product must not contain any phosphate material other than soft ground rock phosphate. Not less than 90% of the soft ground rock phosphate should be able to pass through a sieve with a mesh of 0.063 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in 2% formic acid\nAs set out in parabraph 7(a) of this Schedule\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.9\n+P2 1.9\n+K2O 1.9\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine may be made”.\nCl 0.2\nNPK fertiliser (Phosphate ingredient: basic slag only)\nNPK fertiliser (Phosphate ingredient; Thomas phosphate only)\nNPK fertiliser (Phosphate ingredient; Thomas slag only)\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5);\n3 Not less than 5% potassium oxide (K2O).\nThe sum of the three nutrients must be not less than 20% by weight. The product must not contain any phosphate material other than basic slag, Thomas phosphate or Thomas slag.\nNot less than 75:% of the basic slag, Thomas phosphate or Thomas slag should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in 2% citric acid\nP2O5 1.1\nP2O5 0.5\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.9\n+P2 1.9\n+K2O 1.9\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine may be made”.\nCl 0.2\n2\nNP fertiliser\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5).\nThe sum of the two nutrients must be not less than 18% by weight. The product must not contain basic slag. Thomas phosphate, Thomas slag, calcined phosphate, aluminium-calcium phosphate, soft ground rock phosphate or partially solubilised rock phosphate.\nThe P2O5 content soluble only in mineral acids must not exceed 2%.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nWhere phosphorus pentixide soluble in water is less than 2%, amount of:–\n1 Phosphorus pentoxide soluble in neutral ammonium citrate.\nWhere phosphorus pentoxide soluble in water is equal to or greater than 2%, amount of–\n1 Phosphorus pentoxide soluble in neutral ammonium citrate and in water\nP2O5 1.1\nP2O5 0.5\n2 Phosphorus pentoxide soluble in water\nAs set out in paragraph 7(a) of this Schedule\nN 1.5\n+P2O5 1.5\nNP fertiliser containing aluminium-calcium phosphate\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5) of which at least 2% must be soluble in water, and at least 5% soluble in mineral acids.\nThe sum of the two nutrients must be not less than 18% by weight. At least 75% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in alkaline ammonium citrate (Joule). The product must not contain basic slag, Thomas phosphate, Thomas slag, calcined phosphate, soft ground rock phosphate or partially solubilised rock phosphate, and not less than 90% of the aluminium-calcium phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in water\nAmount of phosphorus pentoxide soluble in mineral acids (after deduction of the amount of phosphorus pentoxide soluble in water)\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nAs set out in paragraph 7(a) of this Schedule\nN 1.5\n+P2O5 1.5\nNP fertiliser containing soft ground rock phosphate\nNP fertiliser containing partially solubilised rock phosphate\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5) of which at least 2% should be soluble only in mineral acids, at least 5% soluble in neutral ammonium citrate and in water and at least 2.5% soluble in water.\nThe sum of the two nutrients must be not less than 18% by weight. Neither product must contain basic slag, Thomas phosphate, Thomas slag, calcined phosphate or aluminium-calcium phosphate. Not less than 90% of the soft ground rock phosphate should be able to pass through a sieve with a mesh of 0.063 mm, and not less than 90% of the partially solubilised rock phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in water\nAmount of phosphorus pentoxide soluble in neutral ammonium citrate and in water\nAmount of phosphorus pentoxide soluble only in mineral acids\nAs set out in paragraph 7(a) of this schedule\nN 1.5\n+P2O5 1.5\nNP fertiliser (Phosphate ingredient: aluminium-calcium phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5).\nThe sum of the two nutrients must be not less than 18% by weight. At least 75% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in alkaline ammonium citrate (Joule). The product must not contain any phosphate material other than aluminium-calcium phosphate and not less than 90% of the aluminium-calcium phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nAs set out in paragraph 7(a) of this schedule\nN 1.5\n+P2O5 1.5\nNP fertiliser (Phosphate ingredient: calcined phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5).\nThe sum of the two nutrients must be not less than 18% by weight. The product must not contain any phosphate material other than calcined phosphate. Not less than 75% of the calcined phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nP2O5 1.1\nN 1.5\n+P2O5 1.5\nP2O5 0.5\nNP fertiliser (Phosphate ingredient: soft ground rock phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5).\nThe sum of the two nutrients must be not less than 18% by weight. At least 55% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in 2% formic acid. The product must not contain anyh phosphate material other than soft ground rock phosphate. Not less than 90% of the soft ground rock phosphate should be able to pass through a sieve with a mesh of 0.063 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nP2O5 1.1\nP2O5 0.5\nAmount of phosphorus pentoxide soluble in 2% formic acid\nAs set out in paragraph 7(a) of this schedule\nN 1.5\n+P2O5 1.5\nNP fertiliser (Phosphate ingredient basic slag only)\nNP fertiliser (Phosphorus ingredient: Thomas phosphate only)\nNP fertiliser (Phosphate ingredient; Thomas slag only)\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% phosphorus pentoxide (P2O5).\nThe sum of the two nutrients must be not less than 18% by weight. The product must not contain any phosphate material other than basic slag, Thomas phosphate or Thomas slag. Not less than 75% of the basic slag, Thomas phosphate or Thomas slag should be able to pass through a sieve with a mesh of 0.160 mm.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in 2% citric acid\nP2O5 1.1\nN 1.5\n+P2O5 1.5\nP2O5 0.5\n3\nNK fertiliser\nProduct obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin, containing by weight:–\n1 Not less than 3% nitrogen (N);\n2 Not less than 5% potassium oxide (K2O).\nThe sum of the two nutrients must be not less than 18% by weight.\nNitrogen (N)\nEEC fertiliser\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:–\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\n1 nitric nitrogen\n2 ammonical nitrogen\n3 ureic nitrogen\n4 cyanamide nitrogen\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.5\n+K2O 1.5\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nCl 0.2\n4\nPK fertiliser\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegetable origin, containing by weight:–\n1 Not less than 5% phosphorus pentoxide (P2O5)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must be not less than 18% by weight. The product must not contain basic slag, Thomas phosphate, Thomas slag, calcined phosphate, aluminium-calcium phosphate, soft ground rock phosphate, or partially solubilised rock phosphate.\nThe P2O5 content soluble only in mineral acids must not exceed 2%.\nPhosphorus Pentoxide (P2O5)\nWhere phosphorus pentoxide soluble in water is less than 2%, amount of:–\n1 Phosphorus pentoxide soluble in neutral ammonium citrate\nWhere phosphorus pentoxide soluble in water is equal to or greater than 2%, amount of:–\n1 Phosphorus pentoxide soluble in neutral ammonium citrate and in water\nP2O5 1.1\nP2O5 0.5\n2 Phosphorus pentoxide soluble in water\nAs set out in paragraph 7(a) of this Schedule\nPotassium Oxide(K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nCl 0.2\nPK fertiliser containing aluminium calcium phosphate\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegetable origin, containing by weight:–\n1 Not less than 5% phosphorus pentoxide (P2O5) of which at least 2% must be soluble in water, and at least 5% soluble in mineral acids;\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must be not less than 18% by weight. At least 75% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in alkaline ammonium citrate (Joule). The product must not contain basic slag, Thomas phosphate, Thomas slag, calcined phosphate, soft ground rock phosphate, or partially solubilised rock phosphate, and not less than 90% of the aluminium-calcium phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nAmount of phosphorus pentoxide soluble in water\nAmount of phosphorus pentoxide soluble in mineral acids (after deduction of the amount of phosphorus pentoxide soluble in water)\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nP2O5 1.1\nAs set out in paragraph 7(a) of this Schedule\nP2O5 0.5\nPotassium Oxide(K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nCl 0.2\nPK fertiliser containing soft ground rock phosphate\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegetable origin, containing by weight:–\n1 Not less than 5% phosphorus pentoxide (P2O5) of which at least 2% whould be soluble only in mineral acids, at least 5% soluble in neutral ammonium citrate and in water and at least 2.5% soluble in water.\n2 Not less than 5% potassium oxide (K2O)\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nAmount of phosphorus pentoxide soluble in water\nAmount of phosphorus pentoxide soluble in neutral ammonium citrate and in water\nAmount of phosphorus pentoxide soluble only in mineral acids\nP2O5 1.1\nAs set out in paragraph 7(a) of this Schedule\nP2O5 0.5\nPK fertiliser containing partially sulubilised rock phosphate\nThe sum of the two nutrients must be not less than 18% by weight. Neither product must contain basic slag, Thomas phosphate, Thomas slag, calcined phosphate or aluminium-calcium phosphate. Not less than 90% of the soft ground rock phosphate should be able to pass through a sieve with a mesh of 0.063 mm, and not less than 90% of the partially solubilised rock phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nPotassium Oxide(K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nCl 0.2\nPK fertiliser (Phosphate ingredient; aluminium-calcium phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegetable origin, containing by weight:–\n1 Not less than 5% phosphorus pentoxide (P2O5)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must be not less than 18% by weight. At least 75% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in alkaline ammonium citrate (Joule). The product must not contain any phosphate material other than aluminium-calcium phosphate and not less than 90% of the aluminium-calcium phosphate should be able to pass through a sieve with a mesh of 0.160 mm.\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nAmount of phosphorus pentoxide soluble in alkaline ammonium citate\nPotassium Oxide(K2O)\nAmount of potassium oxide soluble in water\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nP2O5 1.1\nAs set out in paragraph 7(a) of this Schedule\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nCl 0.2\nP2O5 0.5\nK2O 0.5\nPK fertiliser (Phosphate ingredient; calcined phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegetable origin, containing by weight:–\n1 Not less than 5% phosphorus pentoxide (P2O5)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must be not less than 18% by weight. The product must not contain any phosphate material other than calcined phosphate. Not less than 75% of the calcined phosphate should be able to pass through a sieve with a mesh or 0.160 mm.\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in alkaline ammonium citrate\nPotassium Oxide(K2O)\nAmount of potassium oxide soluble in water\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nP2O5 1.1\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nCl 0.2\nP2O5 0.5\nK2O 0.5\nPK fertiliser (Phosphate ingredient: soft ground rock phosphate only)\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegetable origin, containing by weight:–\n1 Not less than 5% phosphorus pentoxide (P2O5)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must be not less than 18% by weight. At least 55% of the declared phosphorus pentoxide soluble in mineral acids must be soluble in 2% formic acid. The product must not contain any phosphate material other than soft ground rock phosphate. Not less than 90% of the soft ground rock phosphate should be able to pass through a sieve with a mesh of 0.063 mm.\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in mineral acids\nAmount of phosphorus pentoxide soluble in 2% formic acid\nPotassium Oxide(K2O)\nAmount of potassium oxide soluble in water\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nP2O5 1.1\nAs set out in paragraph 7(a) of this Schedule\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nCl 0.2\nP2O5 0.5\nK2O 0.5\nPK fertiliser (Phosphate ingredient: basic slag only)\nPK fertiliser (Phosphate ingredient: Thomas phosphate only)\nPK fertiliser (Phosphate ingredient: Thomas slag only)\nProduct obtained chemically or by blending, without addition of organic nutrient of animal or vegetable origin, containing by weight:–\n1 Not less than 5% phosphorus pentoxide (P2O5)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must be not less than 18% by weight. The product must not contain any phosphate material other than basic slag, Thomas phosphate or Thomas slag. Not less than 75% of the basic slag, Thomas phosphate or Thomas slag should be able to pass through a sieve with a mesh of 0.160 mm.\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in 2% citric acid\nPotassium Oxide(K2O)\nAmount of potassium oxide soluble in water\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nP2O5 1.1\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nCl 0.2\nP2O5 0.5\nK2O 0.5\n5\nCompound fertiliser\nProduct not otherwise specified in this Section of this table, obtained by mixing or blending materials to provide either two or three of the major nutrients nitrogen (N), phosphorus pentoxide (P2O5) and potassium oxide (K2O). Excluded are any materials sold or offered for sale for improving soil structure or as growing media, which contain less than 1% each of these nutrients.\nAt least one of the nutrients must be derived from a material mentioned in the second column of Section A of this table.\nNitrogen(N)\nAmount of nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nPhosporus Pentoxide (P2O5)\nAmount of total phosphorus pentoxide\nAmount of phosphorus pentoxide soluble in water\nN. 0.5 (for declarations below 3.5% N)\n1.1 (for declarations 3.5% N and above)\nAs set out in paragraph 7(b) of this Schedule\nP2O5 (for declarations below 5,.5% P2P5)\n1.1 (for declarations 5,5% P2O5 and above)\nAs set out in paragraph 7(a) of this Schedule\n6\nCompound fertilisers not containing any material mentioned in the second column of Section A of this table\nProducts not otherwise specified in this Section of this table, including those products obtained by mixing or blending materials to provide either two or three of the major nutrients nitrogen (N), phosphorus pentoxide (P2O5) and potassium oxide (K2O). Excluded are any materials sold or offered for sale for improving soil structure or as growing media, which contain less than 1% each of these nutrients. None of the nutrients must be derived from a material mentioned in the second column of Section A of this table.\nPotassium Oxide (K2O)\nAmount of total potassium oxide\nK2 (for declarations bewlo 5.5% K2O)\n1.1 (for declarations 5.5% K2O and above)\nN+P2O5 1.5 for products containing two nutrients only\nN+K2O 1.5 for products containing two nutrients only\nP2O5+K2O 1.5 for products containing two nutrients only\nN 1.9\n+P2O5 1.9\n+K2O 1.9\nSECTION C:\nFLUID FERTILISERS\nGroup\nName of Material\nMeaning\nDeclaration\nLimits of variation (absolute value in % by weight, except where stated)\n1\n2\n3\n4\n5\n* This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement.\n1(a)\nNitrogen fertiliser solution\nProduct obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin, containing by weight not less than 15% nitrogen (N). Nitrogen to be expressed as total nitrogen or, if there is only one form, nitric nitrogen or ammoniacal nitrogen or ureic nitrogen. The maximum biuret content to be ureic N × 0.026\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weigh, of:\n1 nitric nitrogen\n2 ammoniacal nitrogen\n3 ureic nitrogen\nOptional declarations\nWhere the biuret content is less than 0.2%, the statement “low in biuret” may be made\n0.6\nAmmonium nitrate-urea fertiliser solution\nProduct obtained chemically and by dissolution in water, with ammonium nitrate and urea as essential ingredients, containing by weight not less than 26% nitrogen (N). Nitrogen expressed as total nitrogen, where the ureic nitrogen accounts for about half of the nitrogen present. The maximum biuret content to be 0.5%\nAmount of total nitrogen\nAmount of nitric nitrogen\nAmount of ammoniacal nitrogen\nAmount of ureic nitrogen\nOptional declarations\nWhere the biuret content is less than 0.2% the statement “low in biuret” may be made\n0.6\nCalcium nitrate solution (may be followed by one of the following indications:\nfor foliar application\nfor making nutrient solutions\nfor ferti-irrigation)\nProduct obtained by dissolving calcium nitrate in water and containing not less than 8% nitrogen (N). Nitrogen expressed as nitric nitrogen with a maximum 1% ammoniacal nitrogen.\nAmount of total nitrogen\nOptional declarations\nAmount of nitric nitrogen\nAmount of ammoniacal nitrogen\n0.6\nAmount of calcium, where a use is stipulated (see column 1)\nOne quarter, up to a limit of 0.9%\n1(b)\nAqueous ammonia\nSolution containing ammonia gas dissolved in water, containing not less than 15% ammoniacal nitrogen(N).\nAmount of ammoniacal nitrogen\n0.3\n1(c)\nStraight nitrogenous fluid fertilisers named in accordance with regulation 4(3)\nAny straight nitrogenous fluid fertiliser not otherwise specified in this table.\nAmount of total nitrogen\n0.8\n1(d)\nNitrogenous fluid fertiliser\nProduct obtained by mixing or blending two or more of the fertilisers listed in Groups 1(a), 1(b) and 1(c) of Section C of this table.\nAmount of total nitrogen\n0.5 (for declarations up to and including 10% N)\n0.8 (for declarations exceeding 10% N and up to and including 15% N)\n1.1 (for declarations exceeding 15% N)\nIn addition the source materials shall be indicated in parentheses in descending order of nutrient contribution\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nAs set out in paragraph 7(b) of this schedule\n1(e)\nStraight Phosphatic fluid fertilixsers named in accordance with regulation 4(3)\nStraight Phosphatic fluid fertiliser.\nAmount of total phosphorus pentoxide\n0.9\n1(f)\nPhosphatic fluid fertiliser\nProduct obtained by mixing or blending two or more of the fertilisers at Group 1(e).\nAmount of total phosphorus pentoxide\n0.5 (for declarations up to and including 10% P2O5)\n0.8 (for declarations exceeding 10% P2O5 and up to and including 15% P2O5)\n1.1 (for declarations exceeding 15% P2O5)\nIn addition the source materials shall be indicated in parentheses in descending order of nutrient contribution\nAmount of phosphorus pentoxide soluble in 2% formic acid\n0.8\n1(g)\nStraight potassic fluid fertilisers named in accordance with Regulation 4(3)\nStraight potassic fluid fertiliser.\nAmount of total potassium oxide\n1.0\n1(h)\nPotassic fluid fertiliser\nIn addition the source materials shall be indicated in parentheses in descending order of nutrient contribution\nProduct obtained by mixing or blending two or more of the fertilisers at Group 1(g).\nAmount of total potassium oxide\n0.5 (for declarations up to and including 10% K2O)\n0.8 (for declarations up to and including 10% K2O)\n1.1 (for declarations exceeding 15&:percnt; K2O)\n2\nNPK fertiliser solution\nProduct obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin, containing by weight:\n1 Not less than 2% nitrogen (N)\n2 Not less than 3% phosphorus pentoxide (P2O5)\n3 Not less than 3% potassium oxide (K2O).\nThe sum of the three nutrients must be not less than 15% by weight.\nMaximum biuret content: Ureic N × 0.026.\nNitrogen (N)\nEEC fertiliser\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:—\n1 nitric nigrogen\n2 ammoniacal nitrogen\n3 ureic nitrogen\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in water\nPotassium Oxide (P2O)\nAmount of potassium oxide soluble in water\nOptional declarations\nWhere the biuret content is less than 0.2% the statement “low in biuret” may be made. Amount of chlorine. Where the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nP2O5 1.1\nK2O 1.1\nN + P2O5 + K2O 1.9\nCl 0.2\nN 0.5\nP2O5 0.5\nK2O 0.5\nNPK fertiliser suspension\nProduct in fluid form, in which the nutrients are derived from substances both in suspension in water and in solution without addition of organic nutrients of animal or vegetable origin, containing by weight:\n1 not less than 3% nitrogen (N)\n2 not less than 4% phosphorus pentoxide (P2O5)\n3 Not less than 4% potassium oxide (K2O).\nThe sum of the three nutrients must not be less than 20% by weight.\nMaximum biuret content: ureic N × 0.026.\nThe fertiliser must not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphates, or natural phosphates\nNitrogen (N)\nEEC fertiliser\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:—\n1 nitric nigrogen\n2 ammoniacal nitrogen\n3 ureic nitrogen\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nPhosphorus Pentoxide (P2O5)\nWhere phosphorus pentoxide soluble in water is less than 2%, amount of:—\n1 Phosphorus pentoxide soluble in neutral ammonium citrate\nWhere phosphorus pentoxide soluble in water is equal to or greater than 2%, amount of:—\n1 Phosphorus pentoxide soluble in neutral ammonium citrate and in water\n2 Phosphorus pentoxide soluble in water\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nOptional declarations\nWhere the biuret content is less than 0.2% the statement “low in biuret” may be made\nAmount of chlorine. Where the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nP2O5 1.1\nAs set out in paragraph 7(a) of this Schedule\nK2O 1.1\nN 1.9\n+P2O5 1.9\n+K2O 1.9\nCl 0.2\nN 0.5\nP2O5 0.5\nK2O 0.5\nNP fertiliser solution\nProduct obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin, containing by weight:\n1 not less than 3% nigrogen(N)\n2 not less than 5% phosphorus pentoxide (P2O5).\nThe sum of the two nutrients must not be less than 18% by weight.\nThe maximum biuret content is ureic N × 0.026.\nNitrogen (N)\nEEC fertiliser\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:—\n1 nitric nigrogen\n2 ammoniacal nitrogen\n3 ureic nitrogen\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in water\nOptional declaration\nWhere the biuret content is less than 0.2% the statement “low in biuret” may be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nP2O5 1.1\nN 1.5\n+P2O5 1.5\nN 0.5\nP2O5 0.5\nNP fertiliser suspension\nProduct in fluid form, in which the nutrients are derived from substances both in solution and in suspension in water, without addition of organic nutrients of animal or vegetable origin, containing by weight:\n1 Not less than 3% nitrogen (N)\n2 Not less than 5% phosphorus pentoxide (P2O5).\nThe sum of the two nutrients must not be less than 18% by weight.\nNitrogen (N)\nEEC fertiliser\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:—\n1 nitric nigrogen\n2 ammoniacal nitrogen\n3 ureic nitrogen\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nPhosphorus Pentoxide (P2O5)\nWhere phosphorus pentoxide soluble in water is less than 2%, amount of:–\n1 Phosphorus pentoxide soluble in neutral ammonium citrate\nN 1.1\nAs set out in paragraph 7 of this Schedule\nAs set out in paragraph 7 of this Schedule\nN 0.5\nThe maximum biuret content is ureic N × 0.026.\nWhere phosphorus pentoxide soluble in water is equal to or greater than 2%, amount of:\nThe fertiliser may not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphate or natural phosphates.\n1 Phosphorus pentoxide (P2O5) soluble in neutral ammonium citrate and in water\n2 Phosphorus pentoxide soluble in water\nOptional Declaration\nWhere the biuret content is less than 0.2% the statement “low in biuret” may be made\nP2O5 1.1\nN 1.5\n+P2O5 1.5\nP2O5 0.5\nNK fertiliser solution\nProduct obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic products of animal or vegetable origin, containing by weight:\n1 Not less than 3% nitrogen (N)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must not be less than 15%\nThe maximum biuret content shall be ureic N × 0.026.\nNitrogen (N)\nEEC fertiliser\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:—\n1 nitric nitrogen\n2 ammoniacal nitrogen\n3 ureic nitrogen\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nN 1.1\nAs set out in paragraph 7 of this Schedule\nK2O 1.1\nN 1.5\n+K2O 1.5\nN 0.5\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2%, the statement “low in chlorine” may be made\nWhere the biuret content is less than 0.2%, the statement “low in biuret” may be made\nCl 0.2\nNK fertiliser suspension\nProduct in fluid form, in which the nutrients are derived from substances both in solution and in suspension in the water, without addition of organic nutrients of animal or vegetable origin, containing by weight:\n1 Not less than 3% nitrogen (N)\n2 Not less than 5% potassium oxide (K2O).\nThe sum of the two nutrients must not be less than 18% by weight.\nThe maximum biuret content shall be urieic N × 0.026.\nNitrogen (N)\nEEC fertiliser\nAmount of total nitrogen\nAmount, where equal to or greater than 1% by weight, of:—\n1 nitric nigrogen\n2 ammoniacal nitrogen\n3 ureic nitrogen\nOther than EEC fertiliser\nAmount of total nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nN 1.1\nAs set out in paragraph 7 of this Schedule\nN 0.5\nPotassium Oxide (K2O)\nAmount of potassium oxide soluble in water\nK2O 1.1\nN 1.5\n+K2O 1.5\nK2O 0.5\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2%, the statement “low in chlorine” may be made\nWhere the biuret content is less than 0.2%, the statement “low in biuret” may be made\nCl 0.2\nPK fertiliser solution\nProduct obtained chemically and by dissolution in water, without addition of organic nutrients of animal or vegatable origin, containing by weight:\n1 Not less than 5% phosphorus pentoxide (P2O5)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must not be less than 18% by weight.\nPhosphorus Pentoxide (P2O5)\nAmount of phosphorus pentoxide soluble in water\nPotassium oxide (K2O)\nAmount of potassium oxide soluble in water\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nP2O5 1.1\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nCl 0.2\nP2O5 0.5\nK2O 0.5\nPK fertiliser suspension\nProduct in fluid form, in which the nutrients are derived from substances both in solution and in suspension in water, without addition of organic nutrients of animal or vegetable origin containing by weight:\n1 Not less than 5% phosphorus pentoxide (P2O5)\n2 Not less than 5% potassium oxide (K2O)\nThe sum of the two nutrients must not be less than 18% by weight.\nThe fertilisers must not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphates or natural phosphates.\nPhosphorus Pentoxide (P2O5)\nWhere phosphorus pentoxide soluble in water is less than 2%, amount of:\n1 Phosphorus pentoxide soluble in neutral ammonium citrate\nWhere phosphorus pentoxide soluble in water is equal to or greater than 2%, amount of:\n1 Phosphorus pentoxide soluble in neutral ammonium citrate and in water\n2 Phosphorus pentoxide soluble in water\nPotassium Oxide (K2O)\nAmount of water-soluble potassium oxide\nOptional declarations\nAmount of chlorine\nWhere the chlorine content is not greater than 2% the statement “low in chlorine” may be made\nAs set out in paragraph 7 of this Schedule\nP2O5 1.1\nK2O 1.1\nP2O5 1.5\n+K2O 1.5\nCl 0.2\nP2O5 0.5\nK2O 0.5\n3\nCompound fluid fertiliser\nProducts not otherwise specified in this Section of this table, obtained by mixing or blending materials to provide either two or three of the major nutrients nitrogen (N), phosporus pentoxide (P2O5) and potassium oxide (K2O). Excluded are any materials sold or offered for sale for improving soil structure or as growing media, which contain less than 1% of each of these nutrients. At least one of these nutrients must be derived from a material in the second column of Group 1 of Section C of this table.\nNitrogen (N)\nAmount of total nitrogen\nAmount of ureic nitrogen save that a declaration of 10% or less need not be made\nPhosphorus Pentoxide (P2O5)\nAmount of total phosphorus pentoxide\nAmount of phosphorus pentoxide soluble in water\nN 0.5 (for declarations below 3.5% N)\nN 1.1 (for declarations 3.5% N and above)\nAs set out in paragraph 7(b) of this Schedule\nP2O5 0.5 (for declarations below 5.5% P2O5)\nP2O5 1.1 (for declarations 5.5% P2O5 and above\nAs set out in paragraph 7(a) of this Schedule\n4\nCompound fluid fertiliser not containing any material mentioned in the second column of Group 1 of Section C of this table\nProducts not otherwise specified in this Section of this table, including those products obtained by mixing or blending materials to provide either two or three of the major nutrients nitrogen (N), phosphorus pentoxide (P2O5) and potassium oxide (K2O). Excluded are any materials sold or offered for sale for improving soil structure or as growing media, which contain less than 1% of these nutrients.\nPotassium Oxide (K2O)\nAmount of total potassium oxide\nK2O 0.5 (for declarations below 5.5% K2O)\nK2O 1.1 (for declarations 5.5% K2O and above)\nN + P2O5 1.5 for products containing two nutrients only\nN + K2O 1.5 for products containing two nutrients only\nP2O5+K2O 1.5 for products containing two nutrients only\nNone of the nutrients may be derived from a material mentioned in the second column of Group 1 of this Section of this table.\nN 1.9\n+P2O5 1.9\n+k2O 1.9\nSECTION D:\nFERTILISERS CONTAINING BORON, COBALT, COPPER, IRON, MANGANESE, MOLYBDENUM OR ZINC AS TRACE ELEMENTS\nGroup\nName of Material\nMeaning\nDeclaration\nLimits of variation (absolute value in % by weight, except when stated)\n1\n2\n3\n4\n5\n1 BORON\nBoric acid\nIn addition usual trading name may be given\nProduct obtained by the action of an acid on a borate and containing not less than 14% boron soluble in water.\nAmount of boron soluble in water\n0.4\nSodium borate\nIn addition usual trading name may be given\nProduct obtained chemically and having as its essential ingredient a sodium borate and containing not less than 10% boron soluble in water.\nAmound of boron soluble in water\n0.4\nCalcium borate\nIn addition usual trading name may be given\nProduct obtained partly from colemanite or pandermite having as its essential ingredient calcium borate of which at least 98% will pass through a 0.063 mm sieve. Containing not less than 7% boron.\nAmount of total boron\n0.4\nBoron ethanol amine\nProduct obtained from the reaction of boric acid with an ethanol amine and containing not less than 8% boron soluble in water.\nAmount of boron soluble in water\n0.4\nBorated fertiliser in solution or suspension\nProduct obtained by dissolution or suspension in water of one or more of the following: boric acid, sodium borante, boron ethanol amine and containing not less than 2% boron soluble in water.\nAmount of boron soluble in water\n0.4\nCOBALT\nCobalt salt\nThe designation must include the name of the combined mineral anion\nProduct obtain chemically and having as its essential ingredient a mineral salt of cobalt and containing not less than 19% cobalt soluble in water.\nAmount of cobalt soluble in water\n0.4\nCobalt chelate\nIn addition the nature of the chelating agent should be included\nProduct obtained by combining cobalt chemically with a chelating agent and containing not less than 2% cobalt soluble in water of which at least 80% has been chelated.\nAmount of cobalt soluble in water\nAmount of chelated cobalt\n0.4\n0.25\nSolution of cobalt fertiliser\nIn addition the designation must include the name of the mineral anion and/or the nature of the chelating agent\nProduct obtained by dissolving cobalt salt and/or cobalt chelate in water and containing not less than 2% cobalt soluble in water.\nAmount of cobalt soluble in water\nAmount of chelated cobalt\n0.4\n0.4\nCOPPER\nCopper salt\nIn addition the designation must include the name of the combined anion\nProduct obtained chemically and having as its essential ingredient a mineral salt of copper and containing not less than 20% copper soluble in water.\nAmount of copper soluble in water\n0.4\nCopper oxide\nProduct obtained chemically and having as its essential ingredient copper oxide of which 98% will pass through a 0.063 mm sieve and containing not less than 70% total copper.\nAmount of total copper\n0.4\nCopper hydroxide\nProduct obtained chemically and having as its essential ingredient copper hydroxide of which 98% will pass through a 0.063 mm sieve and containing not less than 45% total copper.\nAmount of total copper\n0.4\nCopper chelate\nIn addition the nature of the chelating agent should be included\nProduct obtained by combining copper chemically with a chelating agent and containing not less than 9% copper soluble in water of which at least 80% has been chelated.\nAmount of copper soluble in water\nAmount of chelated copper\n0.4\n0.4\nCopper-based fertiliser\nIn addition the nature of the chelating agent should be included\nProduct obtained by mixing copper salt, copper oxide, copper hydroxide or copper chelate of which at least 98% will pass through a 0.063 mm sieve and containing not less than 5% total copper.\nAmount of total copper\nAmount of copper, soluble in water if this accounts for at least one-quarter of the total copper\nAmount of chelated copper\n0.4\nCopper fertiliser solution\nIn addition the nature of the chelating agent should be included\nProduct obtained by dissolving copper salt and/or copper chelate and containing not less than 3% copper soluble in water.\nAmount of copper soluble in water\nAmount of chelated copper\n0.4\n0.4\nIRON\nIron salt\nIn addition the designation must include the name of the combined anion\nProduct obtained chemically and having as its essential ingredient a ferrous salt (Fe II) and containing not less than 12% iron soluble in water.\nAmount of iron soluble in water\n0.4\nIron chelate\nIn addition the nature of the chelating agent should be included\nProduct obtained by combining iron chemically with a chelating agent and containing not less than 5% iron soluble in water of which at least 80% has been chelated.\nAmount of iron soluble in water\nAmount of chelated iron\n0.4\n0.4\nIron fertiliser solution\nIn addition the nature of the chelating agent should be included\nProduct obtained by dissolving iron salt and/or iron chelate in water and containing not less than 2% iron soluble in water.\nAmount of iron soluble in water\nAmount of chelated iron\n0.4\n0.4\nMANGANESE\nManganese salt\nIn addition the designation must include the name of the combined anion\nProduct obtained chemically and having as its essential ingredient a mineral salt of manganese (II) and containing not less than 17% manganese soluble in water.\nAmount of manganese soluble in wter\n0.4\nManganese chelate\nIn addition the nature of the chelating agent should be included\nProduct obtained by combining manganese chemically with a chelating agent and containing not less than 5% manganese soluble in water of which at least 80% has been chelated.\nAmount of manganese soluble in water\nAmount of chelated manganese\n0.4\n0.4\nManganese oxide\nProduct obtained chemically and having as its essential ingredients manganese oxides of which at least 80% will pass through a 0.063 mm sieve and containing not less than 40% total manganese.\nAmount of total manganese\n0.4\nManganese-based fertiliser\nProduct obtained by mixing manganese salt and manganese oxide and containing not less than 17% total manganese.\nAmount of total manganese\nAmount of manganese soluble in water if this accounts for at least one-quarter of the total manganese\n0.4\nFertiliser in manganese based solution\nIn addition the nature of the chelating agent should be included\nProduct obtained by dissolving manganese salt and/or manganese chelate in water and containing not less than 3% manganese soluble in water.\nAmount of manganese soluble in water\nAmount of chelated manganese\n0.4\n0.4\nMOLYBDENUM\nSodium molybdate\nProduct obtained chemically and having as its essential ingredient sodium mobybdate and containing not less than 35% molybdenum soluble in water.\nAmount of molybdenum soluble in water\n0.4\nAmmonium molybdate\nProduct obtained chemically and having as its essential ingredient ammonium molybdate and containing not less than 50% molybdenum soluble in water.\nAmount of molybdenum soluble in water\n0.4\nMolybdenum-based fertiliser\nProduct obtained by mixing sodium molybdate and ammonium molybdate and containing not less than 35% molybdenum soluble in water.\nAmount of molybdenum soluble in water\n0.4\nMolybdenum fertiliser in solution\nProduct obtained by dissolving sodium molybdate and or ammonium molybdate in water and 5% molybdenum soluble in water.\nAmount of molybdenum soluble in water\n0.4\nZINC\nZinc salt\nIn addition th designation must include the name of the combined anion\nProduct obtained chemically and having as its essential ingredient a mineral salt of zinc and containing not less than 15% zinc soluble in water.\nAmount of zinc soluble in water\n0.4\nZinc chelate\nIn addition the nature of the chelating agent should be included\nProduct obtained by combining zinc chemically with a chelating agent and containing not less than 5% zinc soluble in water.\nAmount of zinc soluble in water\nAmount of chelated zinc\n0.4\n0.4\nZinc oxide\nProduct obtained chemically and having as its essential ingredient zinc oxide and containing not less than 70% total zinc.\nAmount of total zinc\n0.4\nZinc based fertiliser\nProduct derived from zinc salt and zinc chelate containing not less than 30% total zinc.\nAmount of total zinc\nAmount of zinc soluble in water if this accounts for at least one-quarter of the total zinc\n0.4\nZinc based solution\nIn addition the nature of the chelating agent should be included\nProduct obtained by dissolving zinc salt and/or zinc chelae in water. Contains not less than 3% zinc soluble in water.\nAmount of zinc soluble in water\nAmount of chelated zinc\n0.4\n0.4\n2\nMixture of trace elements\nProduct of two or more of the products listed in (1) above. Contains not less than 5% of trace elements when a solid and 2% when a liquid. Contains not less than this following for each trace element declared:\nexclusively mineral\nchelated or complexed\npercentage weight of fertiliser\nBoron\n0.2\n0.2\nCobalt\n0.02\n0.02\nCopper\n0.5\n0.1\nIron\n2.0\n0.3\nManganese\n0.5\n0.1\nMolybdenum\n0.02\n–\nZinc\n0.5\n0.1\nAmount of total trace element\nAmount of trace element soluble in water, where this accounts for at least one half of the total content\nAmount of chelated trace element\n0.4\nSECTION E:\nFERTILISERS CONTAINING MAINLY CALCIUM, MAGNESIUM OR SULPHUR AS NUTRIENTS\nGroup\nName of Material\nMeaning\nDeclarations\nLimits of variation (absolute value in percentage by weight, except where stated)\n1\n2\n3\n4\n5\nCalcium sulphate\nIn addition usual trading names may be given\nProduct of natural or industrial origin containing as its essential ingredient calcium sulphate at various degrees of hydration, containing by weight:\n1. Not less than 25% calcium oxide\n2. Not less than 35% sulphur trioxide\nCalcium and sulphur are expressed as total calcium oxide and sulphur trioxide.\nNot less than 80% of the calcium sulphate should be able to pass through a 2 mm sieve.\nNot less than 99% of the calcium sulphate should be able to pass through a 10 mm sieve.\nAmount of total sulphur trioxide\n0.9\nOptional declaration\nAmount of calcium oxide\n0.9\nCalcium chloride solution\nCalcium chloride solution of industrial origin, containing not less than 12% calcium oxide.\nAmount of calcium oxide\n0.9\nCalcium is expressed as calcium oxide soluble in water.\nOptional declaration\nfor plant spraying\nElemental sulphur\nComparatively refined natural or industrial product containing not less than 98% sulphur (245% sulphur trioxide).\nSulphur is expressed as total sulphur trioxide.\nAmount of total sulphur trioxide\n0.9\nKieserite\nIn addition usual trading names may be given\nProduct of mineral origin containing monohydrated magnesium sulphate as its main component, containing by weight:\n1. Not less than 24% magnesium oxide\n2. Not less than 45% sulphur trioxide\nMagnesium and sulphur expressed as magnesium oxide soluble in water and sulphur trioxide soluble in water.\nAmount of magnesium oxide soluble in water\n0.9\nOptional declaration\nAmount of sulphur trioxide soluble in water\n0.9\nMagnesium sulphate\nIn addition usual trading names may be given\nProduct containing heptahydrated magnesium sulphate as its main component and containing by weight:\n1. Not less than 15% magnesium oxide\n2. Not less than 28% sulphur trioxide\nMagnesium and sulphur are expressed as magnesium oxide soluble in water and sulphur trioxide.\nAmount of magnesium oxide soluble in water\n0.9\nOptional declaration\nAmount of sulphur trioxide soluble in water\n0.9\nMagnesium chloride solution\nProduct obtained by dissolving magnesium chloride of industrial origin and containing by weight:\n1. Not less than 13% magnesium oxide\n2. Not more than 3% calcium oxide\nAmount of magnesium oxide\n0.9",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement."
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement."
    },
    {
      "type": "footnote",
      "label": "f5",
      "text": "* As determined by the Petermann method."
    },
    {
      "type": "footnote",
      "label": "f6",
      "text": "* This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement."
    },
    {
      "type": "footnote",
      "label": "f7",
      "text": "* This is only an indication of how the material should be named and accordingly this form of words should not be used in the statutory statement."
    }
  ],
  "outstanding_effects": [
    {
      "type": "words substituted",
      "affecting": "nisr/1998/353",
      "affecting_title": "The Fertilisers (Amendment) Regulations (Northern Ireland) 1998"
    },
    {
      "type": "words inserted",
      "affecting": "nisr/1998/353",
      "affecting_title": "The Fertilisers (Amendment) Regulations (Northern Ireland) 1998"
    },
    {
      "type": "words omitted",
      "affecting": "nisr/2018/188",
      "affecting_title": "The Pesticides, Genetically Modified Organisms and Fertilisers (Miscellaneous Amendments) Regulations (Northern Ireland) 2018"
    },
    {
      "type": "words omitted",
      "affecting": "nisr/2018/188",
      "affecting_title": "The Pesticides, Genetically Modified Organisms and Fertilisers (Miscellaneous Amendments) Regulations (Northern Ireland) 2018"
    },
    {
      "type": "words omitted",
      "affecting": "nisr/2018/188",
      "affecting_title": "The Pesticides, Genetically Modified Organisms and Fertilisers (Miscellaneous Amendments) Regulations (Northern Ireland) 2018"
    },
    {
      "type": "words omitted",
      "affecting": "nisr/2018/188",
      "affecting_title": "The Pesticides, Genetically Modified Organisms and Fertilisers (Miscellaneous Amendments) Regulations (Northern Ireland) 2018"
    },
    {
      "type": "words omitted",
      "affecting": "nisr/2018/188",
      "affecting_title": "The Pesticides, Genetically Modified Organisms and Fertilisers (Miscellaneous Amendments) Regulations (Northern Ireland) 2018"
    },
    {
      "type": "words omitted",
      "affecting": "nisr/2018/188",
      "affecting_title": "The Pesticides, Genetically Modified Organisms and Fertilisers (Miscellaneous Amendments) Regulations (Northern Ireland) 2018"
    },
    {
      "type": "words omitted",
      "affecting": "nisr/2018/188",
      "affecting_title": "The Pesticides, Genetically Modified Organisms and Fertilisers (Miscellaneous Amendments) Regulations (Northern Ireland) 2018"
    }
  ],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/nisr/1992/187/schedule/1/paragraph/8",
    "retrieved_at": "2026-10-29T02:57:12.660368+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}