# Fertilisers (Sampling and Analysis) Regulations (Northern Ireland) 1996, Paragraph 6: PREPARATION OF THE SOLUTION TO BE ANALYSED


Preparation of extract solutions of the trace elements to be determined
6.1 See Method 25a and/or 25b and, if appropriate, 25c
Treatment of the test solution
6.2 Dilute an aliquot portion of the extract obtained by Method 25a, 25b or 25c with water and/or hydrochloric acid (4.1 or 4.2) so as to obtain, in the final solution for measurement, a concentration of the element to be determined that is appropriate to the calibration range used (7.2) and a hydrochloric acid concentration of at least 0.5 M and not more than 2.5 M. This operation may require one or more successive dilutions.
Take an aliquot portion of the final solution obtained by dilution of the extract, let (a) be its volume in ml, and pour into a 100 ml volumetric flask. When determining the cobalt, iron, manganese or zinc content, add 10 ml of the lanthanum salt solution (4.3). Make up to volume with the 0.5 M hydrochloric acid solution (4.2) and mix thoroughly. This is the final solution for measurement. Let D be the dilution factor.

---
Source: https://www.legislation.gov.uk/nisr/1996/513/schedule/2/part/I/chapter/25d./paragraph/6 (the official version)
Page: https://openlegislation.uk/fertilisers-sampling-and-analysis-regulations-northern-ireland-1996/schedule-2/part-I/chapter-25d./paragraph-6
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.