{
  "url": "https://openlegislation.uk/fertilisers-sampling-and-analysis-regulations-northern-ireland-1996/schedule-2/part-I/chapter-3a./paragraph-7",
  "json_url": "https://openlegislation.uk/fertilisers-sampling-and-analysis-regulations-northern-ireland-1996/schedule-2/part-I/chapter-3a./paragraph-7.json",
  "legislation": "nisr/1996/513",
  "legislation_title": "Fertilisers (Sampling and Analysis) Regulations (Northern Ireland) 1996",
  "legislation_url": "https://openlegislation.uk/fertilisers-sampling-and-analysis-regulations-northern-ireland-1996",
  "path": "schedule/2/part/I/chapter/3a./paragraph/7",
  "kind": "paragraph",
  "number": "7",
  "heading": "PROCEDURE",
  "text": "Preparation of the solution\n7.1 See Method 2.\nDetermination\n7.2 Place in the receiving flask an exactly measured quantity of standard sulfuric acid (4.2) as indicated in the Table of Method 2 (variant (a)) and add the appropriate quantity of indicator solution (4.7.1 or 4.7.2).\nThe end of the extension tube of the condenser must be below the surface of the standard acid in the receiving flask.\nUsing a pipette, transfer an aliquot part of the clear solution as indicated in the Table of Method 2 (variant (a)) to the distillation flask of the apparatus. Add 350 ml water, 20 ml 30% sulfuric acid solution (4.4), stir, and add 5 g of reduced iron (4.5). Wash the neck of the flask with several ml of water, and place a small, long-stemmed funnel in the neck of the flask. Heat in a boiling water bath for an hour and then wash the stem of the funnel with a few ml of water. Allow to cool to room temperature.\nTaking care to avoid any loss of ammonia, add 50 ml concentrated sodium hydroxide solution (4.6) to the contents of the distillation flask, or in the cases where 20 ml of hydrochloric acid (4.1) has been used to dissolve the sample, add 60 ml of concentrated sodium hydroxide solution (4.6). Assemble the distillation apparatus. Distil the ammonia according to the procedure given in Method 2. Titrate the excess acid with the standard solution of sodium or potassium hydroxide (4.3).\nBlank test\n7.3 Carry out a blank test (omitting only the sample) under the same conditions and allow for this in the calculation of the final result.\nControl test\n7.4 Before analysis check that the apparatus is working properly and that the correct application of the method is used by taking an aliquot portion of a freshly prepared solution of sodium nitrate (4.9) containing 0.045 g to 0.05 g of nitrogen.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/nisr/1996/513/schedule/2/part/I/chapter/3a./paragraph/7",
    "retrieved_at": "2026-10-29T02:32:40.012993+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}