# The Hornsea One Offshore Wind Farm Order 2014, Paragraph 1: Design parameters

Extent: E+W+S

(1) All wind turbine generators forming part of Work No. 2 must not—
(a) be less than 82 metres to the turbine hub when measured from MHWS;
(b) exceed a height of 200 metres from MHWS to the upper tip of the vertical blade;
(c) exceed a rotor diameter of 178 metres;
(d) be less than 22 metres from MHWS to the lowest point of the rotating blade; or
(e) be less than 924 metres from the nearest wind turbine generator in all directions.
(2) References to the location of a wind turbine generator are references to the centre point of the turbine.

---
Source: https://www.legislation.gov.uk/uksi/2014/3331/schedule/9/part/2/paragraph/1 (the official version)
Page: https://openlegislation.uk/hornsea-one-offshore-wind-farm-order-2014/schedule-9/part-2/paragraph-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.