# The Industrial Pollution Control (Prescribed Processes and Substances) Regulations (Northern Ireland) 1998 (revoked), 

Extent: N.I.
Status: prospective

The manufacture of products wholly or mainly of wood at any works if the process involves the sawing, drilling, sanding, shaping, turning, planing, curing or chemical treatment of wood (“relevant processes”) and the throughput of the works in any 12 month period is likely to exceed—
(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(ii) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For the purposes of this paragraph—
“relevant processes” other than sawing are “exempt processes” where, if no sawing were carried out at the works, the activities carried on would be treated as not falling within this Part of this Section by virtue of regulation 4(2);
“throughput” shall be calculated by reference to the amount of wood which is subjected to any of the relevant processes, but where, at the same works, wood is subject to two or more relevant processes, no account shall be taken of the second or any subsequent process;
“wood” includes any product consisting wholly or mainly of wood; and
“works” includes a sawmill or any other premises on which relevant processes are carried out on wood.

---
Source: https://www.legislation.gov.uk/nisr/1998/28/schedule/1/part/6/crossheading/timber-processes-3 (the official version)
Page: https://openlegislation.uk/industrial-pollution-control-prescribed-processes-and-substances-regulations-northern-ireland-1998-revoked/schedule-1/part-6/crossheading-timber-processes-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

