{
  "url": "https://openlegislation.uk/measuring-equipment-liquid-fuel-by-road-tanker-regulations-northern-ireland-1984/note",
  "json_url": "https://openlegislation.uk/measuring-equipment-liquid-fuel-by-road-tanker-regulations-northern-ireland-1984/note.json",
  "legislation": "nisr/1984/117",
  "legislation_title": "Measuring Equipment (Liquid Fuel by Road Tanker) Regulations (Northern Ireland) 1984",
  "legislation_url": "https://openlegislation.uk/measuring-equipment-liquid-fuel-by-road-tanker-regulations-northern-ireland-1984",
  "path": "note",
  "kind": "note",
  "number": null,
  "heading": "Explanatory note",
  "text": "(This note is not part of the Regulations.)\nThese Regulations replace the Measuring Equipment (Liquid Fuel by Road Tanker) Regulations (Northern Ireland) 1980, S.R. 1980 No. 127, as amended by the Measuring Equipment (Liquid Fuel by Road Tanker) (Amendment) Regulations (Northern Ireland) 1983, S.R. 1983 No. 138. They apply to all measuring equipment on road tankers (other than those used for the delivery of liquefied gas, lubricating or heated oil and for refuelling ships, hovercraft and aircraft) for use for trade in the making of any measurement of liquid fuel in a quantity exceeding 20 gallons or 100 litres (mainly petrol to filling stations and central heating fuel oils to houses and other premises). They make provision as to the principles of construction and marking of measuring equipment, its manner of use for trade, the inspection, testing, passing as fit for use for trade and stamping of such equipment (and obliteration of stamps on such equipment), and the prescribed limits of error. The Regulations prescribe this equipment for the purpose of Article 9(1) of the Weights and Measures (Northern Ireland) Order 1981 so that it will be unlawful to use it for trade purposes from 1st July 1984 unless it has been tested, passed as fit for such use and stamped by an inspector of weights and measures.\nThe Regulations repeat the provisions of the earlier Regulations subject to some minor drafting alterations and the following changes of substance:—\n(a) a new category of measuring equipment — contents gauging systems — has been included, with appropriate provisions for the construction and marking, manner of use for trade, inspection and testing, prescribed limits of error and passing as fit for use for trade, stamping and obliteration of stamps in respect of these systems (Regulations 2, 8-12, 36, 37-42, 56-58 and 60-64);\n(b) a definition of calibration chart has been included (Regulation 2 (2));\n(c) provision has been made for detailed requirements for dipstick markings and graduations (Regulation 28);\n(d) provision has been made that a person submitting measuring equipment to an inspector for testing, or who an inspector has reasonable cause to believe has possession of such equipment for use for trade shall, if requested, make available for the inspector's use such products in his possession as the inspector may reasonably require (Regulations 39, 45 and 53);\n(e) provision has been made for reduced testing of meter measuring systems in the circumstances referred to in (h) and (i) below (Regulation 50);\n(f) provision has been made for the inspector, when testing a dipstick against a recent calibration chart, not to have to inspect the associated compartment (Regulation 52);\n(g) the prescribed limit of error for scale marks on dipstick blades has been reduced from 4 mm to 2 mm when tested against a calibration chart (Regulation 56);\n(h) meter measuring systems may be used for trade unstamped, where a stamp on the system has been lawfully destroyed, obliterated or defaced to allow the changing of the meter and gas separator assembly (Regulation 65); and\n(i) meter measuring systems may also be used for trade unstamped, where other stamps on the system have been destroyed, etc., e.g., for clearing jammed tickets from printers, for specified periods subject to specified conditions (Regulation 66).\nContravention of Regulations 5, 6, 19 and 36 is an offence under Article 13(1) of the Weights and Measures (Northern Ireland) Order 1981. It is also an offence under Article 9(2) of that Order for a person to use for trade or have in his possession for such use any measuring equipment prescribed by Regulation 4 which has not been passed as fit for such use and which does not bear a stamp indicating that it has been so passed which remains undefaced otherwise than by reason of fair wear and tear. The penalty on summary conviction for these offences is a fine not exceeding £200 and the measuring equipment in respect of which the offence is committed is liable to forfeiture.",
  "extent": "N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/nisr/1984/117/note",
    "retrieved_at": "2026-10-29T03:33:03.385311+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}