# Measuring Equipment (Measures of Length) Regulations (Northern Ireland) 1986, Regulation 2: Interpretation


In these Regulations—
“composite measure” means a measure of length where one of its principal scale marks is a surface and the other is a line, hole or mark;
“end measure” means a measure of length where its principal scale marks are formed by two surfaces;
“measure of length” means a linear measure set out in Part I of Schedule 1 to the Order;
“nominal length” means the maximum length in metric or imperial units which a measure of length is designed to measure in one measurement;
“prescribed limits of error” has the meaning set out in Regulation 23;
“the Order” means the Weights arid Measures (Northern Ireland) Order 1981;
“principal scale marks” mean the two surfaces, lines, holes or marks (or combinations thereof) on a measure of length the distance between which is the nominal length of the measure;
“the stamp” means the stamp prescribed by the Weights and Measures (Prescribed Stamp) Regulations (Northern Ireland) 1969; and
“terminal surface” means a surface forming one of the principal scale marks.

---
Source: https://www.legislation.gov.uk/nisr/1986/308/regulation/2 (the official version)
Page: https://openlegislation.uk/measuring-equipment-measures-of-length-regulations-northern-ireland-1986/regulation-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

