# Measuring Equipment (Measures of Length) Regulations (Northern Ireland) 1986, Regulation 27: Inspectors' powers and duties regarding obliteration of stamps


(1) Subject to paragraph (2), an inspector shall obliterate the stamp on any measure of length which—
(a) fails upon testing to fall within twice the prescribed limits of error; or
(b) fails to comply with any other appropriate requirement of these Regulations.
(2) An inspector shall not obliterate the stamp on any measure of length which falls within twice the prescribed limits of error and which was first stamped before 27th October 1986, notwithstanding that it fails to comply with any other appropriate requirement of these Regulations.
(3) Notwithstanding paragraph (2), where any measure of length has, since it was last stamped, been the subject of any adjustment, alteration, addition, damage or repair which could have affected its accuracy or function, the inspector may obliterate the stamp on that measure.

---
Source: https://www.legislation.gov.uk/nisr/1986/308/regulation/27 (the official version)
Page: https://openlegislation.uk/measuring-equipment-measures-of-length-regulations-northern-ireland-1986/regulation-27
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

