# The Measuring Instruments (EEC Requirements) Regulations 1988 (revoked), Part The EEC Signs and Marks

Extent: E+W+S+N.I.

The attached drawings show the shape, dimensions and out-line of the letters and numbers for the mark of EEC initial verification and the mark of EEC partial verification. Drawing A shows the constituent parts of the stamp described in paragraph 5(2) above; the mark of EEC partial verification described in paragraph 6 above consists of this stamp only. Drawing B shows the constituent parts of the second stamp, described in paragraph 5(3) above. Drawing C is an example of the mark of EEC initial verification consisting of the stamp described in paragraph 5(2) above, and that described in paragraph 5(3) above. Drawing D is an example of the mark of EEC initial verification, consisting of the stamp described in paragraph 5(4) above.
The dimensions given in the drawings are relative values; they are a function of the diameter of the circle described about the letter `e' and about the field of the hexagon. The actual diameter of the describing circles shall be chosen from 1.6 mm, 3.2 mm, 6.3 mm and 12.5 mm.
Drawing “A”
Drawing “A” (continued)
Drawing “A” (continued)
Drawing “B”
Drawing “C”
Drawing “D”

---
Source: https://www.legislation.gov.uk/uksi/1988/186/schedule/1/part/1 (the official version)
Page: https://openlegislation.uk/measuring-instruments-eec-requirements-regulations-1988-revoked/schedule-1/part-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.