# The Merchant Shipping (Life-Saving Appliances for Passenger Ships of Classes III to VI (A)) Regulations 1992, Paragraph 3.5: Liferaft Fittings


The liferaft shall be fitted with water pockets complying with the following requirements:
3.5.1 The cross-sectional area of the pockets shall be in the shape of an isosceles triangle with the base of the triangle attached to the underside of the liferaft;
3.5.2 The design shall be such that the pockets fill to approximately 60% of capacity within 15–25 seconds of deployment;
3.5.3 The pockets shall normally have aggregate capacity of between 125 litres and 150 litres for inflatable liferafts up to and including the 10 person size;
3.5.4 The pockets to be fitted on liferafts certified to carry more than 10 persons shall have as far as practicable an aggregate capacity of (12 × N) litres, where N = Number of persons carried;
3.5.5 The pockets shall be attached on all their sides to each of the upper and lower surfaces of the buoyancy tubes; and
3.5.6 The pockets shall be distributed symmetrically round the circumference of the liferaft with sufficient separation between each pocket to enable air to escape readily.

---
Source: https://www.legislation.gov.uk/uksi/1992/2359/schedule/4/part/II/paragraph/3.5 (the official version)
Page: https://openlegislation.uk/merchant-shipping-life-saving-appliances-for-passenger-ships-of-classes-iii-to-vi-a-regulations-1992/schedule-4/part-II/paragraph-3.5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

