{
  "url": "https://openlegislation.uk/merchant-shipping-safety-and-load-line-conventions-act-1932/schedule-FIRST/part-ANNEX/I/chapter-Regulation/XV/crossheading-double-bottoms",
  "json_url": "https://openlegislation.uk/merchant-shipping-safety-and-load-line-conventions-act-1932/schedule-FIRST/part-ANNEX/I/chapter-Regulation/XV/crossheading-double-bottoms.json",
  "legislation": "ukpga/Geo5/22-23/9",
  "legislation_title": "Merchant Shipping (Safety And Load Line Conventions) Act 1932",
  "legislation_url": "https://openlegislation.uk/merchant-shipping-safety-and-load-line-conventions-act-1932",
  "path": "schedule/FIRST/part/ANNEX/I/chapter/Regulation/XV/crossheading/double-bottoms",
  "kind": "crossheading",
  "number": null,
  "heading": "Double Bottoms",
  "text": "(1)In ships 200 feet (61 metres) and under 249 feet (76 metres) in length a double bottom shall be fitted at least from the machinery space to the fore peak bulkhead, or as near thereto as practicable.\n(2)In ships 249 feet (76 metres) and under 330 feet (100 metres) in length a double bottom shall be fitted at least outside the machinery space, and shall extend to the fore and after peak bulkheads, or as near thereto as practicable.\n(3)In ships 330 feet (100 metres) in length and upwards a double bottom shall be fitted amidships, and shall extend to the fore and after peak bulkheads, or as near thereto as practicable.\n(4)Where a double bottom is required to be fitted the inner bottom shall be continued out to the ship’s sides in such a manner as to protect the bottom to the turn of bilge.\nSuch protection will be deemed satisfactory if the line of intersection of the outer edge of the margin plate with the bilge plating is not lower at any part than a horizontal plane passing through the point of intersection with the frame line amidships of a transverse diagonal line inclined at 25 degrees to the base line and cutting it at a point one-half the ship’s moulded breadth from the middle line.\n(5)Wells constructed in the double bottom in connection with the drainage arrangements shall not extend downwards more than necessary, nor shall they be less than 18 inches (457 millimetres) from the outer bottom or from the inner edge of the margin plate. A well extending to the outer bottom is, however, permitted at the after end of the shaft tunnel of screw ships.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/ukpga/Geo5/22-23/9/schedule/FIRST/part/ANNEX/I/chapter/Regulation/XV/crossheading/double-bottoms",
    "retrieved_at": "2026-10-29T11:38:08.703628+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}