Schedule 2 MODIFICATIONS TO REGULATIONS

Column 1	Column 2
Provision	Extent of modification
The Electricity at Work Regulations 1989^f1 Regulation 18	For regulation 18 of the Electricity at Work Regulations 1989 substitute the following regulation—, “Introduction of electrical equipment 18 Before electrical equipment (other than equipment approved for the purposes of regulation 20(1)) is first introduced into any underground part of a safety-lamp mine,, the manager shall submit to an inspector a copy of the plan required to be kept for that part by regulation 29(5) of the Management and Administration of Safety and Health at Mines Regulations 1993, on which the intended locations of that equipment shall be shown together with a copy of any schematic diagram relating to that part prepared for the purposes of regulation 24(1)”.
The 1993 Regulations Regulation 2	For the definition of “mine” substitute the words— ““mine” means any mine within the meaning of the 1954 Act;”
	For the definition of “owner” substitute the words— ““owner” means any owner within the meaning of section 181 of the 1954 Act;”.
The Mines (Shafts and Winding) Regulations 1993^f2 Regulation 2	For the definition of “mine” substitute the words— ““mine” means any mine within the meaning of the Mines and Quarries Act 1954;”.
	For the definition of “owner” substitute the words— ““owner” means any owner within the meaning of section 181 of the Mines and Quarries Act 1954;”.

Annotations