{
  "url": "https://openlegislation.uk/miscellaneous-factories-transitional-provisions-regulations-1993/schedule-2/paragraph-3",
  "json_url": "https://openlegislation.uk/miscellaneous-factories-transitional-provisions-regulations-1993/schedule-2/paragraph-3.json",
  "legislation": "uksi/1993/2482",
  "legislation_title": "The Miscellaneous Factories (Transitional Provisions) Regulations 1993",
  "legislation_url": "https://openlegislation.uk/miscellaneous-factories-transitional-provisions-regulations-1993",
  "path": "schedule/2/paragraph/3",
  "kind": "paragraph",
  "number": "3",
  "heading": null,
  "text": "(1) The cutter or cutters of every horizontal milling machine shall be fenced, by a strong guard properly adjusted to the work, which shall enclose the whole cutting surface except such part as is necessarily exposed for the milling operations.\n(2) The guard shall either:—\n(a) be provided with adequate side flanges; or\n(b) extend on each side of the cutter or cutters to the end of the arbor, or to the arbor support, or to a distance of not less than half the diameter of the cutter,\nprovided that sub–paragraph (2) of this paragraph shall not apply to cutters used for face milling.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/1993/2482/schedule/2/paragraph/3",
    "retrieved_at": "2026-10-29T13:49:49.402042+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}