# The Miscellaneous Factories (Transitional Provisions) Regulations 1993, Paragraph 3


(1) The cutter or cutters of every horizontal milling machine shall be fenced, by a strong guard properly adjusted to the work, which shall enclose the whole cutting surface except such part as is necessarily exposed for the milling operations.
(2) The guard shall either:—
(a) be provided with adequate side flanges; or
(b) extend on each side of the cutter or cutters to the end of the arbor, or to the arbor support, or to a distance of not less than half the diameter of the cutter,
provided that sub–paragraph (2) of this paragraph shall not apply to cutters used for face milling.

---
Source: https://www.legislation.gov.uk/uksi/1993/2482/schedule/2/paragraph/3 (the official version)
Page: https://openlegislation.uk/miscellaneous-factories-transitional-provisions-regulations-1993/schedule-2/paragraph-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.