Regulation 2

at the beginning of sub-paragraph (1) of paragraph 4, the words “Subject to sub-paragraph (1A) below”; and

after sub-paragraph (1) of paragraph 4, the following sub-paragraph, that is to say—

“(1A)

Where sheet steel is used in the construction of the door or the leaf of a door of a safe or cabinet, its edges need not be lapped inwards as required by sub-paragraph (1) above if the sheet steel used is not lighter than 10 gauge and the door or leaf of a door fits flush, or is recessed, so that no edge protrudes when the door is closed.”.