# The Motor Cycle Silencer and Exhaust Systems Regulations 1995, Regulation 3: The requirements relating to silencers


(1) The requirements with which a silencer must comply for the purposes of section 1(1) of the Act are that the silencer must be—
(a) clearly and indelibly marked in accordance with paragraphs 3.1 to 3.1.3 of Annex II to the Directive, or
(b) clearly and indelibly marked “BS AU 193/T2”, “BS AU 193a: 1990/T2” or “BS AU 193a: 1990/T3” (being marks referred to in the British Standard Specifications indicating that certain requirements specified in those instruments are met).
(2) As respects a silencer, the requirements as to packaging, labelling and the provision of accompanying instructions which must be complied with for the purposes of section 1(1) of the Act are the requirements of Schedule 1 to these Regulations.
(3) For the purposes of this regulation Annex II to the Directive has effect as if at the beginning of paragraph 3.1.1 there were inserted the words “the name,”.

---
Source: https://www.legislation.gov.uk/uksi/1995/2370/regulation/3 (the official version)
Page: https://openlegislation.uk/motor-cycle-silencer-and-exhaust-systems-regulations-1995/regulation-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.